Decor of the portal in the apartment. Doorway design options. Irregularly shaped openings

When renovating small apartments with narrow corridors More and more people are abandoning the door to the kitchen. An open entrance allows you to visually increase the space and save space. In this case, a partition remains that performs zoning functions.

In large private houses, a beautifully decorated entrance to the kitchen from the hall or living room can be a whole work of art and interior decoration.

A wide span can be so functional.

After dismantling door frame the entrance from the corridor and other adjacent rooms, for example, the dining room or living room, can be decorated with various materials and different shapes. But you need to remember a few important points.

It is forbidden:

Dismantle the door in the gasified kitchen. In this case, a fine may be claimed by the gas service. Here the door is necessary for your own safety. Gas stoves in the kitchen were common in homes old building, in modern apartment buildings, mainly electric ones are installed.
Widening the opening is a redevelopment, which entails making changes to the technical documentation. Be sure to coordinate such work with the BTI and other authorized services.

It should also be taken into account that expanding the entrance will require the installation of a more powerful hood. Especially if the kitchen opens onto the living room. Otherwise, odors will spread freely throughout the apartment.

An open doorway is a better idea if there is a corridor between the kitchen and other rooms.

Entrance to the kitchen in Khrushchev

When going out into the living room, you may need not only a powerful, but also more silent hood so as not to interfere with the guests' relaxation.

Examples of the most successful design options

When finishing an open doorway there are practically no restrictions on the choice of materials.

This could be a stone or brick design.

You can finish the span with the same materials as the walls.

Can be used gypsum plaster to create a semblance of stucco.

It is necessary to take into account the possibility of caring for the surface, especially if the entrance is located next to the stove or sink.

Here are some solutions on how to design a doorway without a door to the kitchen.

Finished rectangular opening

The most versatile and simple option. After dismantling the door frame, the passage into the kitchen is left in the same shape.

Or they can be highlighted with plastic or wooden panels, covered with wallpaper or decorative plaster. The choice of materials depends on the style of the interior.

The entrance can be framed by narrow built-in ones, as in the photo below.

In the form of an arch

The ceiling, recognizable by its graceful curve, is one of the most popular alternatives to interior doors.

The arch can be symmetrical or irregular in shape. Such unusual shapes This can be achieved with a plasterboard construction.

How to make an arch with your own hands, watch the video:

More ideas for decorating with different materials can be seen in the photo gallery below.

Photo gallery of ideas and design techniques (30 photos)

In classic styles, stucco or decorative elements are suitable for decoration. wooden inserts and platbands in the form of a column.

Modern design welcomes simplicity in forms and restraint in decorative elements.

The following materials can be used.

Stone;

Brick tiles;

Brick decoration can be done using a material such as gypsum plaster;

Plastic;

tree and MDF boards, laminated chipboard.

Depending on the style of the kitchen, there can be either rough wooden beams or elegant trim.

A doorway that is not equipped with a door is an original and aesthetic solution, often chosen by apartment owners. With proper design of such structures, you can significantly transform your living space and free up useful space. In a small apartment, getting rid of an extra door is quite easy way make the space visually wider. Finishing a doorway without a door is successful and stylish solution problems of small space.

Features of openings without doors

Doorways without doors are successfully designed in public buildings, spacious cottages and small dwellings. This solution is a win-win when combining a living room and a hall. With the help of open passages, small kitchens and hallways are often combined.

Quite often there are situations when the door turns out to be unnecessary. It interferes with moving around the apartment and creates unnecessary difficulties. Doors should be installed in the bedroom, office and children's room. This is explained by the fact that such rooms are designed to create personal space.

Sometimes you can’t do without a door to the kitchen either. Foreign odors do not enter living rooms. The smell of cooking food is a very strong irritant. Therefore, if there is no normal system for removing smoke and gases from the kitchen, it is necessary to install a door. Photos of doorways without doors will help you understand what to choose for your apartment.

To decorate an opening, it is not always necessary to invite professional builders. Such work can be done independently. However, you should become familiar with the features of the process and the main errors. It doesn’t hurt to take a closer look at the photos of completed projects.

Attention! Sometimes the design of a room involves the same finishing of all openings in the room - both doors and windows. Traditionally, lamps are installed in the aisles. They line up along the perimeter of the passage. Other popular options are curtains, shelves, and other decorative details.

Opening shape

The design of an opening without a door can be of any configuration. The main condition is that the shape must correspond to the size of the room and its style. Skills must also be taken into account interior decoration worker. If they are absent, you should not take on a complex project.

Rectangular openings

Often the doorway is left in the same shape as it was before the door leaf was dismantled. Even a craftsman with little experience can complete the work of finishing it. Rectangular structures lend themselves well to finishing. In addition, when covering them, you can realize a wide variety of ideas. Usually, to create a harmonious look, they are finished with plasterboard panels.

The most affordable option is to paint the opening to match the wall surfaces. Rectangular vaults are often shaped like an arch with facing stone.

Designer arch

The arched passage also represents classic version. However, the variety of forms provides ample opportunities to realize original fantasies. How to finish an arch without special skills? The simplest solution is to buy a ready-made wooden vault. Such products usually have standard dimensions.

For those who like to experiment, we can offer the following solutions:

If you choose an arch of an original shape, you can experiment with the visual perception of space. With the original form of the vault, the design should have a strict appearance.

Finishing materials

A variety of materials can be used to design doorways without a door. They usually have various shades, invoice and price.

Decorative rock

The appearance of stone elements is always distinguished by nobility and respectability. Its different types have their own installation features. Their durability also varies. The main difference between natural stone and artificial stone is that it costs much more. It is worth remembering that artificially created minerals can also come in a variety of colors and textures. One of the main advantages of such products is lightness.

The stone will look good at the entrance, in large rooms and in rooms with few pieces of furniture. An opening decorated with such material will look ideal in a room with a fireplace.

Quite often, in parallel with the open opening, the same installation is carried out around the window. Thanks to this technique, the design becomes complete and more comfortable. Therefore, such a solution when decorating openings is very popular among apartment owners.

When performing work yourself, it is necessary to observe certain subtleties of technology:

Before working, markings should be made around the opening. It is necessary to note the shape of the masonry.
Experienced craftsmen recommend that before performing such work, first lay out all the stone elements on the floor in the order in which they will be fixed to the opening.
Laying begins from the bottom corner.
The slabs should be laid symmetrically on both sides of the opening. In its lower part the masonry should have more massive look. All sharp corners of the masonry must be processed.
After finishing the work, the mineral should be treated with a special solution that gives the surface a natural shine.

To properly decorate a doorway with stone, you should lay it so that it contrasts with the shade of the wall. It is better not to combine stone and plastic.

MDF panels for finishing openings

Such boards can perfectly imitate natural wood. They are quite durable and at the same time suitable for finishing both interior and entrance openings. This is due to the universal properties of the material. It is quite light and attractive.

The installation technology of MDF panels is simple. They must be attached using special adhesives. Liquid nails can be used. All joints are closed using platbands. The only disadvantage of such products is the limited color palette.

PVC panels

Plastic panels can be selected in almost any shade. Moreover, they can have any texture. More popular is plastic that imitates wood. Even an inexperienced person can handle the installation of PVC panels House master. The material is lightweight, so it does not slip when installed with glue.

Caring for plastic elements is quite simple. Such openings are decorated with lamps. The disadvantages of this design of the opening include the fact that it is only possible for interior space.

Clinker tiles

In appearance it's like this facing material resembles a brick. She is being released various colors and forms. Typically, tiles are used for external cladding houses. However, the material is often used to create open doorways. This is due to the simplicity of its installation.

Depending on the characteristics of the surface to be finished, clinker elements are mounted on liquid nails or tile adhesive. The tiles are laid asymmetrically.

Plasterboard and stucco

Plasterboard slabs are flexible and lightweight. This material allows you to design a doorway of the most original shapes. The disadvantage of this solution is the increased fragility of the material.

Stucco molding is a product made from polyurethane or gypsum. They are traditionally chosen to create beautiful openings. This material presents some difficulties during installation. The master will need to have good taste and experience of similar work.

Ready-made decorative parts made of polyurethane can be purchased at a hardware store. When using stucco elements, one rule should be followed - than smaller area rooms, the smaller the decorative details you need to choose.

Curtains

Often the vault is decorated with curtains. This method is the most common. Thanks to this solution, a special comfort and completeness is created. It is better to choose curtains that will match the curtains.

For this solution, you should use decorative composition from various fabrics. The original canvas can also be used. You can choose curtains made from bamboo. When hanging the curtain, it will not interfere with free movement. Usually the curtain is made with side fastening to the wall.

An open doorway, which is decorated in the general style of the room, can transform any room.

Preparing the opening

Before finishing work begins, the passage is leveled. This can be done using:

plasters;
gypsum board sheets.

Plastering an opening without a door - this finishing method is one of the most common. However, when choosing it, a lot of dirt and dust is formed. For this reason, many people choose drywall to finish a passage without a door.

Depending on the design of a passage without a door, it can be made a bright element of the interior, or practically hidden, to divert attention. After plastering, the opening can be either painted to match the wall or covered with panels of decorative stone.

When covering an opening without a door with plasterboard slabs, the surface becomes as smooth as possible. Any decorative elements are glued to it if you want to draw attention to it. If you want to leave the opening without a door unnoticeable, you should simply paint it.

Unlike plaster, drywall is easier to process when constructing an opening without a door. When working with it, no debris or dust is generated, and attaching the slabs is quite simple. With plasterboard it is easy to create a passage without a door of any configuration. This attracts many apartment owners.

After completing plastering or covering the opening with plasterboard sheets before finishing works the surface to be treated should be cleaned of various contaminants. Then you can start decorating.

Complex openings without doors

If the considered options for finishing the opening seem too simple, you can experiment with finishing. It is necessary that this be possible at a certain ceiling height and room dimensions. For example, at the top of an opening without a door, you can create a structure of complex shape. In such cases, plastic elements, colored glass and lamps are often chosen to decorate a passage without a door.

For most modern interior styles, it is important to install point diodes into an opening without a door. They will look very stylish.

The opening can be made of any shape if you use drywall panels. Shelves that are installed on the wall near the openings are quite fashionable. Openings that include bar counters look great. Thanks to them, successful zoning of the territory is carried out.

Doing this kind of work with your own hands is quite difficult. Therefore, when deciding to create such an opening, it is necessary to invite specialists. They will help you draw up a project and calculate how much materials will be needed to finish a passage without a door. Installation work when calling professionals, they will be completed as quickly as possible.

If there is no canvas installed in the doorway, the room can be radically transformed. At the same time, the space will visually expand. If the home is a studio room, arches of complex shape will look original. Rough and simple openings without doors should be installed in hallways.

The absence of door panels in rooms is a common occurrence, provided that this is a design move. Often, in this way, they combine the space of the kitchen area and the dining room where people eat. Here we will clearly answer the question of how to finish a doorway without a door leaf, and also find out which materials are best suited for this method of combining two separate rooms. In this case, you can do all the work yourself without the help of a specialist.

Example of finishing a doorway

Important. If you decide to abandon the standard door leaf, then you should finish the opening with high quality, otherwise all the guests will think that you have difficulties with money or taste.

Before finishing the doorway, it must first be leveled to a round or rectangular shape; this work can be done as follows:

This is the most popular methods finishing a doorway without a door.
Important. Due to the fact that the plaster mixture leaves behind a lot of dust and dirt, finishing with plasterboard sheets is most often preferred. Before starting work, it is extremely important to decide on the goals of how you want the opening to look when the work is completed. It stood out, attracting attention, or completely disappeared into the room, remaining invisible.

An example of finishing a doorway with gypsum tiles

If plaster has been chosen, then it can be finished with decorative stone or covered with the same material as the walls in the room. When covering a doorway with plasterboard sheets, you can attach any decorative elements to the surface, since the plasterboard sheets have an absolutely smooth surface.

The peculiarity of drywall is the simplicity of its operation, which cannot be said about plaster mixture, where without certain skills it is almost impossible to make the surface absolutely flat.

Along with this, if drywall is used, then the opening can be made of absolutely any geometric shape.

The process of finishing a doorway with plasterboard

Important. Upon completion plastering work or covering a doorway using plasterboard sheets, you can proceed with subsequent finishing only after the surface has been cleaned of dust and dirt, otherwise any attached elements will not last long.

Various finishing materials

How to decorate a wide doorway? This question is often faced by those who have decided to completely redo the doorway, getting rid of wooden canvas and boxes.

Doorway finishing option

In this case, you can use the following popular types of finishes:

It is worth noting that the list indicated earlier in the text suitable materials is not final, you can finish it in any style based on your taste; above we have indicated only the most common and available options today.

Use of decorative stone material

In a particular case, you can easily use artificial or a natural stone. Any of these materials fits perfectly into the interior of a room where there is no door leaf. The only disadvantage of natural raw materials is their high cost, in comparison with artificial analogues, which are not inferior in quality.

An example of decorating a doorway with decorative stone

Do-it-yourself cladding of a doorway using stone has the following advantages:

the material is fire resistant;
the stone is not susceptible to moisture;
the products are durable, reliable and will last a long time;
the material is quite easy to work with;
All individual stone tiles are standard sizes.

It is better to decorate a doorway with stone in a spacious room, since the bulk of such products have dark shades, then visually the opening will seem more natural. The stone entrance goes perfectly with the presence of a fireplace in the living room.

Option for finishing the opening with decorative stone

The finishing material you choose must have a certain symmetry on each side of the passage being made.
The joints between stone tiles must be the same width.
Options for finishing doorways allow the use of more massive tiles at the bottom than at the top.

Work on finishing interiors made of stone tiles, starts with markup. In this case, this is the most important point of the entire work, since the tiles must lie beautifully, symmetrically and evenly.
Important. When working with stone, use a level. In addition, it is recommended to take care that this material is not combined with wood, since they do not combine well with each other in the interior.
Watch the video on how to decorate a doorway with decorative stone.

Finishing with wooden MDF panels

Designs in the form of arches lend themselves remarkably well to MDF finishing panels with different wood structures. Panels of this type have the following advantages:

strength and durability;
simplicity and ease of routine care;
ease of installation.

MDF panels fit perfectly into any design style of an apartment or house. This is primarily due to the fact that wood is a warm material.

Decorating a doorway with MDF panels

Installation consists of taking dimensions from the opening and cutting out finished parts of the future doorway from the panels. These elements are attached extremely simply, using a hammer and nails or using a screwdriver and self-tapping screws.

Important. MDF panels are not so often used when finishing a doorway due to the lack of a wide range of colors, as well as the difficulty of manufacturing an arched structure of an ideal shape.

Option for finishing the doorway with MDF panels

Using PVC panels for subsequent finishing of doorways

To make the doorway look most original, suitable use standard panels made of PVC plastic. This is due to the abundance color shades material, as well as the ease of its use in any premises, rooms and other spaces. Plastic panels often they can even imitate the surface of stones, while their cost is several times cheaper.

PVC panels of different colors for finishing doorways

Let's look at the main advantages:

Low cost compared to all other materials.
Fairly simple care.
Installation is carried out on your own without assistance.
Huge selection of color shades and textures.

Most often, when using PVC panels, finishing is done with color sheets that have warm woody shades. The convenience of installing such finishing elements is that they can be easily attached to liquid nails, without resorting to the use of screws, nails and cement mortar, which greatly simplifies the installation procedure, which can be done independently without much difficulty.

Important. Mounting these elements front door irrelevant, since unlike stone and wood, plastic is quite fragile and the slightest mechanical damage can lead to a crack.

To increase space, as well as simply for aesthetic purposes, door blocks are removed from interior partitions. When remodeling an apartment, a free passage is most often created between the hallway and the living room. No less popular is an opening without a door, combining the kitchen with the living room. The expansion of space occurs due to getting rid of the dead zone reserved for opening the sash. However, redevelopment creates a new problem associated with the design of a doorway without a door, which is sometimes difficult for the owner to solve.

Not every opening in a house can be left without a door. The open passage of a bathroom or pantry will look ridiculous. The kitchen, bedroom and office are considered a secluded area, but for these rooms there is an exception to the rules. To organize intimacy, openings are decorated with curtains, sliding screens and other similar devices. As a result, a visual illusion of separation of rooms is created, while the space remains without a dead zone.

Open passages emphasize the integrity of the living space. All openings are made of the same shape and decorated with material similar in structure to create a single ensemble.

The door leaf is removed when creating an opening between the kitchen and living room or when one of these rooms is connected to the hallway. However, it is advisable to provide visual separation at least with curtains.

If a gas stove is installed in the kitchen, for safety reasons the room will have to be fenced off with at least a sliding system.

Free passage is arranged when combining a hall or kitchen with a balcony. The process involves the simultaneous removal of the door and window frames. If an office or small bedroom is set up on the balcony, the rooms are separated by curtains or a screen.

When we are not talking about partitioning off a kitchen with a gas stove, the passage is often decorated with shelves. Climbing flowers, figurines and other elements are placed on decorative shelves.

Getting rid of the door doesn't just open up the space. Air circulates freely through open passages. Even in a small apartment it becomes fresher in summer.

When creating an opening, doors are not required in the following cases:

A modern solution when performing redevelopment is an interior portal, which allows you to maintain the rectangular shape of the opening. Without a door, the passage becomes freer, and the decoration from massive decorative elements adds aesthetics.

Arched passages are popular. In an apartment with high ceilings, they give preference to the classics, arranging the opening in a semicircular configuration. For a building with low ceilings, it is advisable to visually raise the walls with an elliptical arch.

The door block is abandoned by owners who like passages of the wrong configuration. When designing, asymmetrical arches, triangles, and trapezoids are in demand. A rectangular portal looks beautiful, the corners of which are rounded at different radii. The only drawback is the limited passage size. It will not be possible to create an opening if its width is less than 80 cm.

Doors are abandoned when the passage is decorated with a bar counter, stained glass elements, and mosaic fragments. Often such techniques are appropriate for studio apartments.

Advantages and disadvantages

If you compare a beautifully designed open doorway with a door block, you will be able to identify a number of advantages:

The integrity of the space of the combined rooms is created. The apartment becomes free, bright, while maintaining the functionality of each zone. The kitchen remains a kitchen, the living room remains a living room.
When framing the doorway, materials that do not require complex maintenance are used. The absence of a sash eliminates loosening of the frame and the formation of a dead zone.
Without a door leaf, the opening can be given an original configuration, allowing you to emphasize the interior style of the entire room.
Decorating an interior portal with even the most expensive materials will be more cost-effective than installing a high-quality one door block.

The disadvantage of an open passage is that it cannot be used for storage. With any type of design, a passage without a door is not able to provide intimacy for a specific purpose area.

Free ventilation through open openings will bring great inconvenience when combining a kitchen with living rooms. Smells from cooking, along with fat vapors, will spread throughout the apartment.

Forms

You can design the opening while maintaining the original configuration or modify the passage. Often the shape of the structure depends on the materials used for finishing. Important role plays the skill of the master.

Of all the types of doorways, the simplest option is the classic rectangular shape. An inexperienced person can assemble such a structure. To create an opening, remove the entire door block along with the frame. The ends of the walls are trimmed along the contour decorative cladding. If it is difficult to dismantle the hatch, you can remove only one flap. Cover the remaining frame elements with MDF or plastic. The disadvantage of this method is the narrowing of the doorway due to the remaining elements of the frame.

In the case of arched openings selection of forms huge:

Considered a classic semicircular arch. The transition is suitable when combining any rooms. If the apartment has low ceilings, it is better to abandon the semicircular arch or widen the passage.

Arches trapezoidal forms are easier to manufacture, suitable for apartments with low ceilings, are often installed when combining a kitchen with a living space. However, designers rarely use the trapezoid due to its association with the shape of ritual accessories.

Fans of unusual configurations prefer triangular arches The design has many subtypes, more suitable for spacious rooms with high ceilings.

Modern apartments are increasingly equipped with doorways asymmetrical forms. The structure is easier to make from plasterboard. For decoration, LED lighting is used, niches, shelves and other decorative elements are arranged. Asymmetrical designs make it possible to hide large defects in the passage and the interior partition itself.

How to decorate a doorway?

When decorating an opening without a door, almost any material used for wall decoration is suitable. Budget option is plasterboard construction followed by painting or wallpapering. It is optimal to choose gypsum boards when manufacturing a device of an asymmetrical shape. Plastic or MDF will be cheap.

More expensive materials are used to decorate the doorway. fake diamond, tiles, valuable wood species. The pinnacle of art is the design of a passage with stucco.

When choosing the option of finishing a doorway without a door, you need to take into account the style of the entire room. The design should harmoniously fit the passage into the interior, and not highlight it with a separate structure.

There are two types of portals in the apartment: full - with a top and side elements, double-sided - only side edges without a top. Similarly, they provide for the installation of a threshold and platbands or abandon these elements.

Installation of slopes and plasterboard arches

If you decide to create a doorway without a door with your own hands in the shape of an arch, it is better to use drywall for decoration. The sheets are inexpensive, easy to cut and install. When making an arch, a frame is assembled from a galvanized profile. The structures give the shape of the future opening. The frame is sheathed with fragments cut from gypsum board sheets. Fixation occurs with self-tapping screws. The finished arch is treated with a primer, a perforated corner is glued, putty is applied, and after drying it is sanded.

If there is no desire to build an arch, the slopes are simply lined with plasterboard. To further refine the doorway, use paint on water based or wallpapering.

How to decorate a doorway with stone?

The finishing of the portal with decorative stone looks stylish. The material is made from natural chips with the addition of coloring pigments and polymers. When framing an opening, smooth boundaries are rarely adhered to. Most often preference is given torn edges. To aesthetically decorate a doorway indoors, use a stone with a small, almost smooth relief pattern. Elements with deep texture create a bulky design. They are used to decorate entrance door openings from the street side.

Decorative stone cuts well, but for corners it is better to use ready-made ones corner elements. Installation is carried out with tile adhesive or liquid nails.

Finishing with additions and platbands

It will be possible to simply and tastefully decorate a rectangular doorway made in the form of slats. The elements are made of wood, MDF or plastic. The latter look less aesthetically pleasing.

Made from MDF, there are regular ones, with an edge at the end, and telescopic ones. In the first option, the edge of the plank is without decorative covering. You need to fit the joints tightly. Extensions with edges have a finished look. The end is sealed with decorative film and in case of flaws the joints look presentable.

They are produced in flat, rounded and other shapes. Wooden planks can be decorated with carvings. The elements are installed using glue, nails or self-tapping screws. Telescopic platbands are secured with a lock to a pre-fixed strip.

Finishing the interior doorway with MDF

MDF panels will turn out beautiful and inexpensive finishing portal, only platbands are also selected from similar material. The disadvantage of cladding is the fear of dampness. MDF is better do not use to design a passage connecting the kitchen to the living space. If above the stove is organized good system hoods, then the material is not at risk of dampness.

To sheathe a doorway with MDF, first build a frame from wooden slats. The panels are cut to size and secured with special metal clips. The planks are joined together using a tongue-and-groove joint.

MDF panels without locks are placed on adhesive solutions. The frame is not being built. To glue the planks, prepare a perfectly flat surface. The joints are covered with a decorative strip, and the edges of the passage are framed with platbands.

Decorating a doorway with plastic

The principle of decorating an opening with plastic is reminiscent of finishing MDF panels. Only the material is different. PVC plastic panels are fixed to the frame with fastening clips or glued. The completion of the frame is a platband made of a similar material, attached to the guide strip.

PVC panels trim doorway rectangular, semicircular and other configurations. Sold in stores ready-made kits for cladding arches, you just need to select the product according to the size of the passage.

Advantages of polyurethane stucco molding

Gypsum stucco is rarely used due to its fragility and heavy weight. If the apartment has high ceilings, and the Venetian or other similar style is chosen for decoration, then the doorways are decorated with polyurethane elements. The material is non-fragile, lightweight, and can be painted.

To install such stucco molding, prepare a flat, durable surface. Pre-treatment is carried out with a deep penetration primer. The elements are secured with an adhesive mixture. After the glue has hardened, the joints are puttied and then sanded with sandpaper.

Wood finishing

Lovers natural materials they prefer a portal made of wood, lined with extensions and platbands. When making a door portal with your own hands, you can even use cheap pine wood. After good sanding, treatment with protective impregnations and painting with varnish, the material will be difficult to distinguish from valuable wood. You can decorate the wooden portal of a doorway with carved ornaments.

The elements are being installed on the frame. First, level planks are attached to the slopes, then platbands are installed. The doorway lining is fixed with self-tapping screws. The caps are recessed into drilled secret holes, and the top is rubbed with putty. I glue the platbands and secure them with nails or self-tapping screws.

Decoration with curtains

A simple option to decorate doorways without a door is to hang curtains. The whole process consists of fixing the cornice over the passage. Curtains will hide the opening without a door from view, distract attention, and will not clutter up the space. The main requirement is not to use curtains with horizontal opening. They will become an obstacle to free passage. It is optimal to use curtains for doorways with vertical closure. IN open state curtains are tied to the wall.

If you make every effort, you can decorate a free interior passage better than a door block. If expensive materials are used, it is advisable to take advice from experts so that the costs are not in vain.

Reading time ≈ 12 minutes

Many people today want to design an entrance area to a kitchen without a door, but do not know how to make such a doorway (example in the photo below). It's modern and good decision, which not only saves space, but also makes the room more spacious and comfortable. If you are planning to free up usable space and transform your kitchen, our ideas for competent organization premises without a standard door frame for you. Let's consider a variety of options for finishing an open passage.

An open arched doorway that spans the entire wall makes the kitchen wider and brighter

Open doorway - what is it?

Not only owners of small-sized apartments, but also spacious apartments resort to designing an entrance area without a door. Surely similar design solution transforms the interior and helps save a lot of free space. However, this idea has other advantages:

Doors without doors - this design technique is able to harmonize and visually unite the space of two adjacent rooms with different interiors.

Among the disadvantages are the smells and aromas of food that can be heard from the kitchen while cooking. To cope with this nuisance, you will have to install a powerful hood or frequently ventilate the room. Of course, you can install it instead swing doors, but the design of the open passage still looks more presentable.

Open arched doorway with wood trim and a mini-partition with shelves

Selection of finishing materials

Not in all opening rooms will a doorway be appropriate - for example, in a bathroom, bedroom and other private area you can hardly do without it. Here we need a full-fledged door, or at least sliding design, which will provide the necessary privacy for residents. But this perfect place for the construction of a passage without doors.

Materials for finishing openings may differ in texture, strength and relief, the main thing is that they are easy to maintain and practical. Consider the most popular:

Drywall is a unique material that can realize a lot of ideas, creating structures of any configuration. In addition, it is practical, easy to maintain, install and dismantle, bends perfectly and takes any shape. It can be used as a basis for creating entire architectural compositions or finished in the Minimalist style, while leaving it untouched;
Stone is one of the most durable and wear-resistant materials. Its artificial counterparts are often used, but in some interiors you can also find natural stone finishing. Laying can be chaotic or performed according to a pre-thought-out pattern. In this case, it is better to refuse to use drapery and other decor in the form of curtains or drapes. Stone cladding is a separate work of art in the interior;
Clinker tiles - capable of imitating brickwork, suitable for Scandinavian, Country and Loft styles. This material is fixed, like stone, often with tile adhesive. They lay tiles according to a certain pattern or asymmetrically - it all depends on the idea and design concept;
Wood - trim made of natural wood in an arch will look appropriate if such a design repeats, for example, the cladding window openings. Of course, this is one of the strongest and most durable materials. It can be carved, varnished or decorative paint. Wood is environmentally friendly and safe for the health of residents, but in the kitchen it should still be covered with a special fire-resistant protective solution;
PVC sheathing is a plastic panel that even a beginner can install. The material is quite lightweight and is often used to create doorless openings. You can decorate spotlights and beautiful ornaments. The downside of PVC is its low structural strength, so such an arch will have to be handled with care and precision;
MDF panels are an imitation of natural wood. They can be painted in any color that suits the design of the kitchen, and you can also install blinds for attaching curtains and decorative curtains. They are easy to install - just use special glue and liquid nails; the seams can be hidden with platbands or other elements;
Stucco molding is perfect for Borocco, Rococo, Gothic, Classical and Venetian styles. It can be complemented with bas-relief and columns, coated with paint (silver, gold or platinum) or left white. Previously, this decorative element adorned only the facades of the houses of the rich and aristocrats, as well as city buildings, but now everyone has the chance to build such beauty at home. Stucco molding can be made of polyurethane and gypsum;
Stained glass is false arches on wooden or metal frames. A beautiful mosaic of various colors with ornaments and designs can be painted on the glass. Such design should be appropriate, so it is not suitable for every interior;
Sandrik is a panel of plasterboard or wood protruding above an arched vault or rectangular opening. Its construction requires fairly high ceilings and some construction skills. Sandrik, in turn, can be decorated with stucco, various figures, niches, shelves and carvings.

It is important to ensure that the passage lining material matches the wallpaper and other types of wall surface finishing. It is better that it does not lose its characteristics during operation for a long time. Also, the walls must be smooth, and the slot for the arch must be made according to all the rules. Otherwise, the design will look careless and sloppy.

Variety of types and shapes

To understand how best to design a doorway without a kitchen, you can look at photos on the Internet with numerous options, and then choose the most suitable one. Entrance area the passage can have different configurations, shapes, and materials of manufacture. The main thing is that everything matches general style and matched the interior.

What shape can a doorless opening be:

Arches amaze with the variety of shapes, sizes and materials, so finding something suitable for your kitchen is not a problem at all. Let's look at the most common types of arched vaults:

Any arch can hide wall imperfections and repair defects, as it takes all the attention. Being the brightest element in the wall, it takes all the attention and sets the mood for the entire room.

Visual structure of an elliptical arch

So that the arched vault or U-shaped passage does not look boring, it can be decorated not only with lighting, stucco molding or other architectural elements, but also beautiful drapery. Once inspired, you can purchase ready-made thread curtains or make your own decor. You can use any available means: cardboard, stones, beads, etc.

Decorating a doorway

Upgrading the passage from the kitchen to the adjacent room creates a feeling of integrity and harmony in the interior. This creates a slight illusion of separation and, and without the use of doors at all. To design doorless openings, various connecting elements, materials and decor are used:

To attach most decorative curtains to an open opening, you will need to install a cornice, which can be round, string or profile. Fastening is done using strings, rings, clothespins, loops, eyelets or using a hook method. In the latter case, rollers and runners are used.

The framing of the opening can be varied appearance kitchens and transform the apartment so that the interior sparkles with new colors. Neat braids look very beautiful, homemade products from tubes, glass, paper clips, wine corks and stones.

Ideas for decorating an open aisle

To choose the right shape for the doorway, you need to take into account the features of the room - namely, the radius of the corners of the future arched structure and the height of the ceilings. However, when planning an open opening without a door to the kitchen, it is important to take into account not only the layout of the apartment, possible defects in the walls and the dimensions of the room, but also the chosen design style. In order for the material and shape of the arch to harmonize with the interior, you need to pay attention to some nuances:

classic - it is recommended to choose arches of the correct geometric shape, for example, oval, rectangular or elliptical. Solid and light colors are welcome; natural stone, wood and plasterboard are suitable materials, and gypsum stucco is suitable for decoration;
eastern - you can immediately safely install keel-shaped, arrow-shaped and triangular arches. Gothic elements, original ornaments and prints in oriental style will also come in handy;
modern – these can be the styles of High-Tech, Minimalism, Loft and Modern. Welcome geometric shapes, original finish, bright colors and unusual decor. Great idea there will be an installation LED backlight or the use of glossy details on interior curtains;
Provence is a romantic design in the spirit of the French province, where you should adhere to restrained forms and delicate shades. Suitable for openings with rounded shapes and neat finishing;
Empire, Gothic and Borroco are the personification of luxury and aristocracy, therefore the use of large stucco molding, various architectural structures, multi-level niches, columns and even gilding in decoration is allowed.

Interior arch in classic style, finished with white decorative plaster

Since the dining and cooking area is a public place in the apartment where all household members gather, there should be no problems with combining adjacent rooms. The video below shows with photo examples how best to decorate a doorway without a traditional kitchen door with your own hands. Don’t forget to also decorate the passage with architectural decor or curtains to make the apartment feel cozy and homely.