Country veranda covered with siding. Finishing a closed veranda at the dacha. Interior decoration of a veranda in a private house: photo of how to cover the ceiling and walls, what to make the flooring from and how to paint it. – Synthetic coatings

A modern country house is designed to provide best conditions living in it. Currently, all conditions have been created for this - abundance constructive solutions in house construction, a variety of traditional and new proven materials.

One of the elements of private buildings is currently a terrace - a fully or partially open area equipped with a roof. It allows you to fully feel like a part of nature, practically without leaving your home. What materials and in compliance with what requirements can be used to finish the terrace will be discussed further.

Users often search:

Classic terrace design

Structurally, an extension to a house, called a terrace or veranda, is a podium raised above the ground on one of the types of foundations, and a roof made of some material, supported by several support beams. According to their design, such structures are divided into:

open;
partially closed;
closed.

Open veranda

This view is good when located in the lee sunny side. Due to the absence of fences, there are practically no boundaries between the veranda and the space surrounding it. It is better if the floor height of such a structure is low. This is especially true when living in country house children.

Photo: 3D project of a country house with a veranda

Due to the lack of complete isolation from the atmosphere, the operation of structures of the first and second types is possible only in the warm season. It is impossible to properly insulate them due to the design features, and it is quite difficult to completely protect visitors to such a terrace from the wind and raindrops flying inside.

Closed terraces

This type is most suitable for year-round use as additional room. Even in the winter cold, closed from the wind and frost, you can enjoy hot tea while admiring the beauty of nature. In this case, it is better to combine the interior decoration of the veranda with insulation of all its walls. This will minimize heating costs for the house as a whole.

Veranda finishing options

The manufacturing process of the described structures is not complicated and is quite accessible with your own hands, as is finishing the veranda inside or outside. Since the topic of the article requires a more detailed acquaintance with the second part of the works, we will consider them, focusing on possible options, their features, advantages and disadvantages.

Currently, the interior of the veranda is covered using the following materials:

wooden lining;
plastic panels;
MDF panels;
cement plaster and cement-based artificial stone.

Decorating the veranda with wood

The classic option is the use of natural wood materials for finishing the walls not only of the interior of the house, but also of extensions. The lining is distinguished by its good appearance, ease of installation and low requirements for the quality of base preparation.

Its installation is carried out on a lathing made of 40x40 mm bars using special fasteners - clamps, which grab the panels by the groove and securely fix them. Finishing parts can be placed vertically, horizontally or at an angle to the floor.

Thematic material:

When finishing the exterior, you can sheathe the veranda only by installing the lining parallel to the soil with the ridges up to prevent the accumulation of water in the grooves.

Plastic finish

Also quite a common option. It is better to decorate a closed veranda with such panels. In this case, temperature changes are less sensitive to the material, which helps to increase its service life.

Unlike wood materials, plastic is practically not afraid of water. Modern retail chains offer many options for both color and texture design of plastic panels.

Installation plastic trim easier than wood. Thanks to the considerable width of the panels, the process is faster.

It is convenient to fasten the finishing parts to the sheathing using a construction stapler, driving the staples into a wide shelf along the edge of the products. Plastic panels do not require further finishing with paintwork, they can be easily washed with a damp cloth, and dust does not settle on them.

Interior finishing with MDF panels

Another common finishing material for interior work is MDF panels. Like the previous option, they are distinguished by a large working width, which allows for sheathing to be carried out quite quickly. For fastening to wooden sheathing, clamps are used, similar to those used during installation. wooden lining.

Thanks to a large number colors that imitate natural wood, stone and even leather, this interior decoration of the veranda will have a very high quality look. With all its advantages, MDF also has a significant drawback - very low moisture resistance. In this regard, it is better not to use them for finishing open terraces. Otherwise, additional protection will be required in the form of varnishing all sides of the panels.

Decorating veranda walls with cement materials

In the case of using cement-containing materials for the manufacture of terraces building materials– blocks with one or another filling, or bricks, it is better to finish the walls with mixtures or details that are similar in composition.

Please note that gypsum-based plaster and gypsum artificial stone are not suitable for covering the walls of open verandas.

Often home owners are stopped by the high cost of cement finishing materials. At the same time, it is not difficult to produce the required amount of original artificial stone yourself in a home workshop. By adding aniline dye, you can get a unique interior in the room being finished.

Polycarbonate for finishing terraces

As already noted, the materials listed above, used in finishing the interior space of verandas, have certain disadvantages that limit their use. IN last years increasingly wider external walls and the roofs of the terraces are covered with polycarbonate - artificial transparent material, allowing you to get closed space, maintaining visual contact with the surrounding nature.

There are two main types of this plastic:

Cellular. It is characterized by minimal weight, high light transmittance, and durability, therefore it is often used for roofing terrace roofs.
Monolithic. Its properties are close to real quartz glass, but unlike it it does not have such high fragility. This determined its use in frame structures vertical arrangement - windows, doors, transparent walls.

Modern manufacturers are not limited to producing colorless sheets. To create a soft shadow, we recommend using green, blue, red, yellow cellular polycarbonate for the roof. You can combine several colors, giving the entire design brightness and uniqueness.

Covering veranda walls with cellular polycarbonate is quite easy to do yourself. To work you will need minimum set tools:

cutting knife - any construction knife will do;
screwdriver

The polycarbonate installation technology involves the following list of works.

The installation of cellular polycarbonate on the roof of the terrace is carried out in a similar way. If there is a ridge - the junction of two roof slopes, use a special ridge profile, sold in organizations that sell sheets.

In the absence of cutting experience, cutting sheets to the required sizes can also be done by workers at construction bases.

As follows from our review, the amount of materials for covering terraces is sufficient to create a unique structure. Before finishing your veranda with any of them, carefully study all the operating features in a particular case.

A veranda is an extension adjacent to a certain side of the main structure of the house. Typically, the veranda is used only in the warm season, since there are no heating devices. The design can be different - closed and open (veranda under the roof). There are both glazed and unglazed verandas. Finishing work directly depends on this factor.

When repairing the walls in the veranda with your own hands, keep in mind that more stringent requirements are imposed on materials for exterior finishing. As for the exterior wall decoration, it should naturally fit into the overall exterior of the house. It is important to consider that this room should perform not only decorative, but also practical functions. A well-lit veranda, where there is no unnecessary furniture, but in abundance houseplants only contribute to a quality summer vacation.

The purpose of this room is not only decorative functions; there is also a practical side to the matter. A well-lit room, where there is no unnecessary furniture, but where there is an abundance of indoor plants - all this best contributes to a pleasant summer holiday. This is why many people ask the question: how to decorate a veranda?

Do-it-yourself wall repair in the veranda: finishing options, photos, videos

There are a lot of options for decorating the walls of the veranda - choose the one that is most suitable. If the future involves glazing the veranda, then the option with a metal profile will seem especially good.

Tips for decorating a veranda

If you are planning glazing, then stained glass windows made of aluminum, which are placed directly on the plinth, are ideal for the walls. The use of these elements allows you to simultaneously solve several problems - both the construction of walls and their further finishing. More precisely, finishing is not needed here - you just have to wash the glass from time to time. Only you need to think about how to decorate the profile itself and the intermediate posts. Perfect for this facing brick or stone.

Glass blocks are another good option for finishing a veranda, which can be done at the stage of wall construction. This material is, first of all, good because it is constructive and decorative.

The modern building materials market offers an impressive range of different blocks: frosted, corrugated, colored glass. There are also types of blocks with decorative applications- they are made in the internal cavity. Anyone who has seen them knows that they look really very beautiful.

A variety of glass block options can be combined as you wish. If desired, create some kind of panel. It would be nice to accompany this with effective lighting. Of course, the cost of such a veranda will increase significantly compared to structures made of plywood or plastic walls, but the end result will pay for all investments.

If the wall consists of glass blocks, you will not worry about light transmission. There will always be light in such a room, despite the presence of small windows.

Advice! Install windows directly on the roof (it will turn out something like dormer windows). You can successfully combine both options - let one wall consist of glass blocks, and the others - stained glass.

The fourth wall of the veranda is the load-bearing wall of the house. Its decoration will be done when you begin interior decoration of the room.

Do-it-yourself wall repair in the veranda: using wood

If you have an open veranda, the concepts of exterior and interior decoration of the room are mixed here. Typically, such structures are made of wood: this applies to both structural and decorative elements.

Features of finishing veranda walls with wood:

Compared to other durable materials that can be used for the construction and decoration of veranda walls, wood is ideal, creating a favorable atmosphere for comfortable relaxation. As a result, the air in the room will always be saturated with a woody aroma.

The elements supporting the roof can consist of rounded logs or timber with a cross-section of 150x150 mm.

Many owners do not want to save on finishing the veranda, deciding to decorate this place in a solid, high-quality manner, because there will be a place for the whole family to relax. For this situation, manufacturers offer a variety of solutions.

Recently, decking has often been used to cover verandas. This material is known as decking board. This usually includes garden parquet and deck boards, for the manufacture of which they use not wood, but a composite. That is, in addition to wood, the composition contains polymer additives. As a result, the product improves its characteristics - they acquire high strength and are not afraid of moisture. All this is perfect for both closed and open verandas. Even an unheated structure can be lined with this material.

Planken made of ash or larch is also high-quality, very expensive wood, with which you can easily carry out exterior finishing. Planken is a planed facade board consisting of solid wood. What is the difference between planken and ordinary planed boards? The difference lies in the shape: planken has beveled and rounded chamfers. There are no connecting grooves that are present in the lining, due to which the installation is carried out with gaps, and not end-to-end.

A veranda made of wood, first of all, is good because it can be easily attached to different structures - brick, stone, wood. The point is that the finishing of the facade in this regard fully corresponds to the finishing of the veranda. Often wood is not just painted, but the surface is decorated with carvings.

Attention! Decorating the design of the veranda with carvings will be a worthy solution. The beautiful carved parapet and twisted pillars will look different here. The first element, for example, can be painted in contrast to other structures.

Arched hanging elements will also look good if they have a lace pattern. In general, there are many options, so use your imagination.

Interior decoration glass veranda

As for finishing such a veranda, almost any solution can be used here. Interior decoration is approximately the same task as decorating a loggia. However, usually the veranda is a more spacious room that provides greater design opportunities.

Let's take a closer look:

veranda - summer design. But nothing can stop you from installing heating here and using the premises throughout the year, and not just in the summer. In this case, a variety of finishing materials are suitable here;

An excellent option for organizing the design of a veranda - the roof is made of glass and stained glass windows are installed. Due to this, the room will always be flooded with sun;

a worthy addition to decorate the walls of the veranda - unusual blinds or curtains of original colors;

In addition to wood, MDF, plastic, and plasterboard can be used to decorate the veranda. A more budget-friendly option is painting. Many people prefer polystyrene tiles.

Watch a video on how to repair walls in a veranda, where finishing options will be discussed. This material will be useful for both novice builders and experienced decorators who want to decorate their veranda.

Decorating the walls on the veranda can be done by the most different ways, but in most cases households prefer light colors.

Do-it-yourself wall repair on the veranda: materials, installation, photos, videos

As noted above, the interior decoration of the veranda can be made from different finishing materials. The choice directly depends on the dimensions, purpose and microclimate of the room.

If heating is provided on the veranda, then you can finish this part of the building with plasterboard and wallpaper the top. But in most cases, owners country houses, you have to choose materials that are suitable for an unheated veranda. Therefore, it is important that the material not only be attractive, but also harmoniously combine with the interior of the residential building, and also meet all requirements. This is resistance and practicality to temperature changes.

What materials can be used to sheathe a veranda:

MDF boards;

wood paneling;

finishing PVC panels.

And below we will look at each of the materials separately, including their installation process.

MDF panels.

A popular finishing material for walls are MDF panels. The length of a wide board or one slat is from 2.5 to 3 m, width is 15-30 cm. The hardware store offers a wide range of panels of various shades; you can buy finishing materials to suit every taste. The surface of the panels is different. It can imitate wood, stone and other materials.

The main advantages of this material:

huge selection of shades and noble appearance;
practicality, which is especially important for covering unheated rooms. In addition to being resistant to temperature and moisture changes, the panels are easy to clean and do not accumulate dirt and dust. It is enough to wipe the surface with a rag or soft sponge soaked in soapy water;
ease of installation is one of the main advantages of wall finishing material. It is enough just to make a sheathing from slats and then attach the panels;
reasonable price - the cost of the panels is small, so everyone can afford to buy the most acceptable option.

Installation process of MDF panels

First you need to attach wooden slats to the walls (you can purchase metal ones, but in this case the cladding will cost more). The remaining building material is suitable for the frame. Each owner has materials in stock from which a frame can be made. But it is important to adhere to the following size: the width of the slats is 4 cm, the thickness is from 2 cm.

You can attach wooden slats to nails, thereby adjusting uneven walls. In this case, you won’t have to bother with leveling the walls and buying expensive materials.

For work, you will need a plumb line or a building level so that the wall after covering is perfectly level.

Each panel has a groove or recess. The first panel must be installed only from the corner, screwed with screws, the next one must be placed next to the first until it stops so that it fits into the recess and a click is heard. The process of decorating the walls itself will not take much of your time; it is interesting and fast.

If you need to sheathe a door or window opening, you need to cut the panels. This is very easy to do using electric jigsaw or a regular saw.

Transitions on the ceiling and floor can be hidden using plinths. At the same time, it is important to choose the right shade of the baseboard so that the veranda as a whole looks decent.

A wide selection of textures and shades of MDF panels allows you to turn a variety of design ideas into reality. A veranda decorated with panels of various shades looks original, especially if you choose materials by color. At the same time, you can zone the space: eating area, relaxation area, work area, etc.

PVC panels.

By doing repairs to the walls of the veranda with your own hands, you can save money and cover it with plastic panels. This finishing material is well adapted to temperature changes and high humidity. PVC panels are a practical and inexpensive material. Their cost is low, and even a beginner can handle the installation process.

It should also be noted that caring for the panels is easy: just wipe the surface with a slightly damp sponge. Due to the ease of installation and low cost, PVC panels can be updated every three to five years, thereby changing the appearance of the room. Let's say you like panels with imitation wood - an eco-style room is quite suitable.

If you are tired of finishing the walls “like wood”, change the panels to new ones that imitate metal surfaces, fabric and even a natural stone. A huge selection of shades and textures, ease of installation, plus low cost - these are the main advantages of this material. By the way, you can decorate with PVC panels not only the walls themselves, but also the ceiling.

Features of installation of PVC panels

You will need a wooden strip (30x20, 30x10 mm) for the frame. If there is no wood, then you can buy a special profile designed for attaching drywall. But here it is important to choose the material taking into account the type of veranda. If the walls of the veranda protrude outward, it is better to use wooden slats, since the metal acts as a “cold bridge.”

The panels are attached to the frame using fastening material (nails or screws), but it is important to leave a gap between the wall and the tile, thereby allowing the board to “breathe.” A gap of 2-3 cm will be enough.

It is worth noting some disadvantages of this material: the panels are fragile, which means that if you accidentally catch the wall, for example, when moving furniture, you can break them.

Attention! If you plan to use the veranda as a summer dining room, then to prevent the backs of the chairs from being deformed by the plastic panels, it is better to nail additional protection to the wall at the level of the backrest. A decorative wooden board with a certain pattern or a board covered with fabric looks beautiful. It turns out unusual and beautiful, and the veranda will become a favorite place to relax.

Lining.

Solid wood lining – durable and practical. The material is not afraid of temperature changes and moisture, has excellent thermal insulation properties and is easy to clean.

This lining has a standard thickness of 22 cm. The board can be attached independently. You can cover the veranda from the inside with wooden clapboard (not only the walls, but also the ceiling).

Lining characteristics:

the material is stable and durable. He is not afraid of any mechanical loads;
practicality - you can sheathe the room once and not return to this issue in the next 15-20 years;
subtle woody aroma and beautiful appearance;
walls decorated with wooden boards are beautiful and safe for health. Wood is a natural material, but can catch fire even though it is impregnated special compounds;
a huge selection of shades and a long service life (more than 20 years).

In construction stores you can choose material for repairing veranda walls to suit your taste and estimated budget. Please note that the cost of a solid board will be higher compared to jointed boards. This material is no different in appearance, but is only suitable for interior decoration.

That is, if your veranda does not have heating, then buy lining consisting of solid wood. If you ignore such recommendations and decorate the walls of the veranda with cheap material, then during operation and under conditions of changes in humidity/temperature, cracks may appear on the surface. Of course, the appearance of this room will not be as attractive as after the renovation is completed. In addition, the very strength of the finishing material will suffer.

Experienced experts recommend using solid “A”, “B” and “C” class boards for interior wall decoration. This material is excellent for finishing indoor walls. The cost of this lining will be lower than that of “extra-class” material, only small nuances are noticeable on the surface - knots and dents. Such boards are pre-impregnated with a special compound and treated with putty, so that when repairing the walls of the veranda with your own hands, these steps can be eliminated. There is another marking for the lining – “extra” class. The quality of such material is high, as is the cost.

All work on finishing the walls of the veranda can be done independently. You just need to first make the sheathing and attach the planks to the wall. The method of fastening may differ: with self-tapping screws (hidden), nails or using a stapler.

Upon completion of installation, it is better to treat wooden walls with a liquid protected from ultraviolet rays or open them with varnish, thereby extending the life of the material.

There are many difficulties associated with finishing work, the main one of which is the choice of high-quality finishing. The fact is that over time, finishing options have become even more complex. There are many high-quality, beautiful and practical materials which are used for these purposes. In this article we will pay attention specifically to the decoration of the veranda. Those who are lucky enough to have this useful area in their home often wonder about finishing.

The choice is influenced by many factors, including price, the overall style of the house and the type of veranda. We invite you to get acquainted with what the decoration of a veranda at the dacha might look like and see photos that will help you visualize the idea.

First you need to figure out whether the type of veranda plays a role in its decoration. The difference between a veranda and terraces or gazebos is that it has at least one wall that is common with the house. In addition, there are verandas that are attached to general design or are part of it with walls and a common roof. If we make a small summary, we can understand that verandas can be:

You should know that the decoration of an open veranda is different from a closed one. Why? It's all about the influence of the atmosphere on the material. For example, strong, durable materials are used in open verandas that can withstand the effects of the sun, precipitation, temperature changes and other negative factors. As for the closed veranda, its finishing is much simpler. Wallpaper, tiles, and other materials are used. With a closed type, you can save money on material without sacrificing quality, but with an open type, you can’t.

What type of veranda do you have? Answer this question and select the material that will be suitable for this type. What can you choose from? Let's find out.

Exterior materials

Exterior finishing is characterized by increased performance and must be of high quality. Over the years, users have tested a lot of products that have proven themselves in practice. Let's start reviewing them.

Siding

This material was created for such work. It is famous for its positive characteristics. Siding is made from different materials:

For the veranda of summer cottages, choose either vinyl or wood siding. And if the first option is more affordable, then you will have to pay for the second. However, the material has many advantages. The products do not fade in the sun, are not afraid of moisture, are strong, durable and, most importantly, beautiful. They are not afraid of temperature changes. In addition, finishing the veranda at the dacha with your own hands will not be difficult. Look at the photo to see how attractive the material looks.

Plastic

It is used quite often in decoration. This is a whole range of materials with excellent properties. These include PVC plastic panels, polycarbonate, and plastic double-glazed windows. All materials are low cost, are not afraid of moisture, are visually attractive, durable and reliable.

Besides PVC panels The veranda is also finished from the inside. The material is easy to care for, easy to install, and the veranda will look decent. And thanks to the diversity color options, textures and other parameters, you can harmoniously decorate your veranda.

And from polycarbonate, which is quite flexible and durable, you can build structures of complex and original shapes. Together with metal frame, the veranda will be both reliable and attractive.

Brick and stone

As for these materials, they always inspired confidence. Everyone considers the stone durable, reliable, resistant to all kinds of influence and quite beautiful. In addition, decorative stone or brick are fireproof and are not afraid of sudden temperature changes, which makes them one of the most durable products.

Moreover, such materials can be combined with others to make the room even more attractive. As an option - glass and stone or brick and wood. It's all a matter of taste here.

Materials for interior finishing

Here the list is a little longer, since the operating conditions are different. In addition, internal work is somewhat different from external work, since the finishing of the ceiling and floor, and not just the walls, is added. What materials are suitable for this work?

Tree

Most often they stop there. After all, wood has a lot of advantages, the main one of which is environmental friendliness. We are talking about an interior space, so the finishing should not emit toxic substances. And wood is durable, strong, beautiful and clean. From available materials can be used:

Here the choice is yours. Look how beautiful it looks wood trim inside.

Working with wood is not difficult and depends on correct sequence works The basis for installing lining, block house or MDF panels is a wooden frame. It is to these slats that your trim will be attached. In addition, materials can be installed horizontally or vertically. If the veranda is not high, then you can use a trick and install the paneling vertically. And in the decoration use light colors. If the veranda needs to be expanded, fasten the lining horizontally. The finished building will appear wider.

Drywall

Often closed verandas are sheathed with plasterboard. This makes it possible not only to insulate the room, but also to easily level the walls and get rid of defects. Cladding with clapboard is a fairly simple task that anyone can handle.

After such work, you have a lot of opportunities for further finishing. Everything here is like in an ordinary house: you can hang beautiful wallpaper, paint the walls, or just putty them and make decorative plaster. The decision is yours. Based on the general style of the house and interior. You can even combine several different materials.

It is also important that you can use plasterboard to finish both the ceiling and all the walls. Then the veranda will be harmonious and beautiful. As for the interior itself, everything depends on the purposes that the veranda will serve. Some people make a rest room out of it, since they don’t have one inside. In this case, you need to install a coffee table and chairs, a sofa, and take care of high-quality lighting. It would be useful to dilute the room with plants. Some even make a small swing or hang a hammock on the veranda.

In the event that the veranda will serve as an office, then you need to limit yourself to only a workplace and additional shelves. A table and a chair are all you need for work. And so that extraneous sounds do not disturb you, the veranda needs to be properly soundproofed.

Plastic panels

We have already considered them as exterior decoration. Still, I would like to say that this material is, after all, suitable for working inside. Their cost is low, but the finish is good. Everything looks quite simple, but at the same time the coating is quite practical.

Since verandas often serve as hallways where everyone takes off their shoes, dirt in them is nothing new. And wash plastic surface panels couldn't be easier. In addition, if you make a floor from ceramic tiles, then cleaning will not be a problem for you on the veranda.

Let's sum it up

As you can see, finishing a veranda at the dacha is not an easy task. It is important to decide on the material, calculate all the pros and cons and think about your plans. The materials that were indicated are not the entire range. It’s just that they are most often used in such work, and they have won the trust of many users. But what exactly to use is up to you.

How to decorate a veranda at your dacha in an original way

Tired of the dusty hustle and bustle of megacities, city residents are eager to purchase suburban real estate. They build houses themselves that suit individual tastes. Therefore, the relevance of the question of how to decorate a veranda at the dacha is increasing every day. Appear advanced technologies and innovative materials that turn the process of hand-clad cladding into a pleasure accessible to every owner of country mansions.

Purpose and types of verandas

Often, a terrace is a relatively small open space adjacent to one of the walls of a personal building. However, there are also closed versions of verandas that serve as a warm vestibule at the entrance to the main building. In cold weather it can be used as a dressing room, leaving outerwear and street shoes. This application will protect the rooms from the penetration of winter slush and dirt.

Most often, open verandas are used as a room for family recreation, arranging tea in the fresh air. Friendly gatherings bring you closer to the surrounding beauties of nature, without forcing you to move away from the familiar atmosphere of your home.

Based on location, there are two main types of combined verandas:

A passageway separating rooms from the street, preceding the entrance to the main building. This familiar option is used in the construction of most small private houses.
The second type includes verandas attached to one of the rooms and not having a separate exit to the courtyard.

Despite the simple design of such a structure, facing the terrace requires some effort. In this case, you can completely get by on our own, creating cozy place family vacation.

To understand how best to decorate a veranda located at the dacha, you should first thoroughly study the list of materials offered by specialists. Based on your own preferences, limited only by financial capabilities, you can make the right choice.

Wooden lining is considered the most popular material for cladding a veranda. It is used to decorate the ceiling and walls both inside and outside the extension. After special treatment, the lining becomes resistant to negative influences, which allows it to withstand various tricks of nature.
The interior finishing of the ceiling and walls can be done with sheets of moisture-resistant plasterboard. The ability of this material to be processed is used by designers to create original interiors.
For a closed veranda, experts recommend making the interior cladding using MDF. Its advantages are its presentable appearance, reminiscent of natural wood, as well as strength and durability. However, the material's exposure to moisture, as well as significant temperature fluctuations, does not allow the use of MDF panels outside the room.
Products made of polyvinyl chloride for finishing verandas are becoming increasingly popular. Thanks to the variety of colors, types and textures, you can easily choose suitable PVC panels. An attractive feature for novice craftsmen is the possibility of self-assembly. In addition, such panels are not afraid of water and other negative influences. A beautiful appearance does not require any special care. Dirty panels can be easily washed with soapy water.
For exterior decoration, you can use siding. By purchasing material that imitates stone, brick, or natural wood, you can significantly simplify the process of facing work.

When choosing from the proposed options, be guided by your own taste. However, you should not save money by purchasing material from unverified manufacturers. Although products from well-known brands will cost a little more than counterfeit products, the quality is guaranteed.

Ceiling finishing

It is recommended to start with thorough impregnation of all elements made of natural wood with a special antiseptic composition. This way you can protect the structure from premature rotting and protect it from the encroachment of voracious insects.

After antiseptic treatment, you can begin installing the frame base. The wooden sheathing is made from timber with a section of 30x50; 50x50 mm is also suitable. The frame material also requires pre-treatment with antiseptic agents.

The simplest cladding option is the use of wooden lining. Fragments of finishing material are fixed on the sheathing perpendicular to the beams of the frame base. Galvanized nails are used as fastening elements.

It should be noted that a ceiling finished with wooden lining takes on a finished look after sanding and varnishing.

Independent installation of a veranda ceiling from PVC panels

It will require a little more effort than covering it with natural wooden lining. By diligently following the proposed recommendations, you can easily finish the ceiling of your country veranda with your own hands, saving on the costly call of a team of professional tilers.

The initial profile is securely fixed to the wooden sheathing. Subsequently, individual plastic fragments are connected with its help into a solid ceiling structure.
Sheets of panels are fixed in the grooves of the original profile. The stability and reliability of the system is facilitated by the use of special clamps. Can be used as fastening elements accessible to everyone home handyman self-tapping screws
Installation of the next panel is carried out using a similar method of fixation in the initial profile.
The further process is a periodic sequence of the manipulations described above.

When performing self-installation, it is necessary to take into account the ability of the plastic material to expand when heated. Having a small gap of up to 20 mm will protect the ceiling structure from troubles caused by the negative effects of heat.

The use of other materials for finishing the ceiling

If you plan to cover the veranda with siding, such a coating is quite suitable for decorating the ceiling yourself. The installation process is similar to installing PVC panels. You can finish the terrace ceiling in the same way. MDF boards. Manufacturers provide the construction market with a huge selection of different designs of siding and MDF, ensuring the growing popularity of these materials.

When using plasterboard sheets as a ceiling covering, it is recommended to replace the wooden frame elements with a metal profile. Special elements are installed directly on it. Such parts are the basis for fixing drywall sheets. Self-tapping screws are used to secure the covering fragments.

After fixing the drywall, it is recommended to prepare the surface for finishing. The ceiling must be puttied and thoroughly cleaned.

Self-clad veranda walls

Applicable only for closed premises. Open terraces do not require walls.

Finishing should begin with the formation frame system from wooden blocks. The accuracy of installation is controlled by the building level.

Laying a special thermal insulation layer will make it possible in the future to use the veranda for relaxation in the cool season. It is recommended to first protect the room from moisture and condensation. For this, a special waterproofing film is used, which is fixed under the insulation.

A necessary condition is the initial treatment of all wooden elements with an antiseptic composition. This precaution will protect the structure from damage resulting from rotting.

The simplest option internal lining Do-it-yourself verandas include finishing the walls with wooden clapboards. Coverings made from MDF panels are also becoming increasingly popular. PVC products are no less in demand.

Veranda flooring

The choice of material for the terrace floor is determined by the operating conditions of the room. Today, solid or terrace boards, ceramic tiles, laminate and other well-known finishing materials are used as veranda flooring. Here a lot depends on financial capabilities.

The best option for a country house is a floor covered with terrace board or waterproof laminate. Such materials are distinguished by the availability of self-installation, ease of maintenance and durability.

An alternative solution is to use modern PVC panels or traditional ceramic tiles for the flooring. Inventive and creative individuals prefer tiles due to the opportunity to realize their own fantasies. By arranging fragments of the covering in a certain order, they create unique patterns and original patterns underfoot. Wealthy owners of country estates can afford finishing with new linoleum models that have improved performance characteristics that complement a fairly respectable appearance.

External cladding

The variety of modern finishing materials does not allow them to be described in detail in one article. Therefore, we will consider the most popular options.

Many summer residents tend to cover the outer surface of the veranda with wooden clapboard. However, even careful treatment with special compounds is not able to preserve natural beauty for a long time. natural material. Changeable weather and precipitation leave their mark, disrupting the pristine beauty of the cladding.

Horizontal siding, usually used when performing facade work, is supplied by manufacturers with a special locking mechanism. This simple device allows you to easily connect individual fragments. This quality attracts ordinary people who want to independently carry out the external cladding of the terrace.

It should certainly be noted that the installation of siding panels is preceded by a preparatory stage. It consists of forming a special frame (sheathing) onto which the plastic elements of the outer cladding will be attached.

How to sheathe the inside of a veranda inexpensively

The vast majority of country and country houses are built with a mandatory veranda, no matter whether heated or not. What is a dacha without a veranda, a full-fledged living space, and at the same time a place to store all kinds of utensils. After completing the construction of the building, sooner or later you will have to decide how and with what to cover the inside of the veranda so that it is inexpensive and beautiful.

Living in a room that looks like a barn is uncomfortable, and it’s not easy to spend extra money.

Requirements for finishing material

Before looking for material and a way to sheathe the inside of the veranda, you need to look at the conditions of the room, and only then look suitable material inexpensive.

Let's focus on the main ones:

Temperature and humidity indoors. It depends on which side of the house the veranda is located on, sunny or shady, whether it is possible to sheathe the inside walls with materials based on cellulose fibers, or whether you will have to buy plastic, inexpensively and reliably;
The frequency of people living in the house and using the premises. For a house in which a constant temperature is not maintained, and people live with long breaks in time, the problem of how to line the walls inside turns into a question of dealing with water condensation;
Age of the veranda and the entire building. There is no point in trying to sheathe the walls indoors until the shrinkage processes of the foundation and building frame have been completed.

In the simplest case, you can sheathe the walls from the inside cement bonded particle board, very inexpensive, practically not afraid of dampness, does not warp even with strong condensation. But from an aesthetic and practical point of view, most owners would like the cladding inside the veranda to, first of all, be comfortable and safe for health, and only then it would be inexpensive and practical. Therefore, from more than two dozen cladding options, we will leave only those most suitable for the listed requirements.

How to sheathe a veranda with wall shrinkage, inexpensively and efficiently

Instead of the traditional vertical boarding, you can sheathe the walls with horizontal padding on a cross batten. It will turn out inexpensive and practical. To prevent the finishing from being torn off the walls during shrinkage, the board is filled with a maximum gap at the tongue-and-groove joint and mandatory installation of insulation, for example, made of foamed polyethylene.

After three to four years, the decoration on the veranda can be inexpensively updated:

Remove the board, insulation and sheathing;
Treat the wood with antiseptic impregnation, stain and varnish;
Lay the sheathing, insulation and sheathe the walls again, but with the correct gaps in the joints between the boards.

In this way, you can inexpensively cover any room in a wooden house, or a bathhouse made of timber. For brick and block buildings, having significantly less shrinkage, the veranda can be immediately sheathed according to the finishing scheme.

Popular materials for covering verandas

The modern market offers enough big choice materials for decorative wall cladding, including verandas. The list of the most popular finishes usually includes:

Lining, board, wooden slats;
MDF or fiberboard, boards and panels;
Plywood, OSB boards;
Waterproof gypsum plasterboard sheets;
PVC panels.

All of the listed materials fit well into the interior of the walls of the room, do not swell with moisture and do not create a feeling of discomfort for the owners, therefore, in the question of how to sheathe the inside of the veranda inexpensively, price and personal preferences and desires remain the determining factors.

To sheathe a veranda indoors truly inexpensively, you will have to do a larger amount of work yourself, and spend the bulk of the costs on purchasing high-quality material.

But not all indoor conditions are the same. Often, before sheathing the veranda inside the photo, it makes sense to contact a specialist for advice and clarification.

Material for a cold veranda

It is quite difficult to choose what to cover the inside of an unheated veranda. There are not many finishing options that can be used inside a cold, unheated room. Most often the list is limited to plastic panels, waterproof brands OSB boards and coniferous lining.

The main problem that owners of unheated premises have to face is condensation that regularly forms on the surface inside the cladding. Therefore, you should not try to cover the walls of a closed veranda with materials made from cellulose fibers, primarily fiberboard and MDF. Even when painted with enamels or varnished, they quickly swell, which leads to warping and breakage of fasteners.

PVC panels are considered the best option. They do not rot, do not absorb moisture, the choice of colors is simply huge, and all this wealth will be relatively inexpensive when compared, for example, with oak or cedar lining.

If desired, the inside of the veranda can be sheathed with plastic with a pattern that imitates valuable types of wood, natural stone, or simply a single-color color that matches the interior of the room.

To finish with polyvinyl chloride, the walls of the veranda will first need to be sheathed with a supporting frame made of galvanized profile. Metal profile strips are nailed to the walls in increments of no more than 60 cm. The easiest way is to sheathe the veranda with vertical strips of PVC; in this case, the profile is nailed in horizontal rows.

The walls of the veranda facing the street, before being covered with panels, are insulated with isolon or foil polyethylene; this is inexpensive and effective. Internal warm walls can be sheathed with mineral thermal insulation with a layer of vapor barrier membrane inside. In this case, it will be necessary to organize additional ventilation of the room, since plastic, like glass, creates increased level humidity.

For dachas, the problem of condensation is especially relevant during the onset of cold weather. After the owners move out with the first frosts, a large amount of water vapor accumulates through the walls; they need to be removed by flowing ventilation before the low air temperature turns into frost on the walls inside the room.

The choice of polyvinyl chloride to sheathe the inside of the veranda of a house cannot be considered particularly successful. Plastic always remains a fire hazard; at low temperatures, an accidental push from a chair or a careless blow can lead to cracking of the material.

Therefore, if you can inexpensively buy lining made of oak or larch, it is better to sheathe the inside of the room with wood, which will last for several decades.

Decorating the veranda with wood

Wood has always been considered the best material for any finishing works inside the veranda. The easiest way is to cover the walls inside the room with clapboard, both in an expensive version and relatively inexpensively, approximately at the level of PVC panels.

Standard lining is divided into four quality classes:

Extra is the most durable and beautiful material, without a single knot or disruption in the fiber pattern. Such wood is used for expensive finishing inside the living quarters of the house;
C-class is the cheapest, designed to cover a shed or utility room. Despite the fact that in general the work is inexpensive, due to the extremely low quality, it is not recommended to use verandas for interior finishing;
Classes A and B allow some defects in the form of knots or even cracks, but most of them are located at the end of the plank. It is with this clapboard that it is best to cover the veranda.

Most craftsmen do not trust the information about the class indicated by the manufacturer on the packaging; most often the material turns out to be of lower quality than stated when sold. Therefore, before covering the inside of the veranda with clapboard, do not be too lazy to open and discard some of the planks in order to avoid defects when finishing the walls.

In addition to class, the material may differ in the shape of the front surface. Samples most popular profiles are shown in the figure. If you want to create the impression of a log vault and walls, you can sheathe the walls inside the room with one of the types of boards - block house.

The technology of clapboard cladding is practically no different from the technique used for installing PVC. Initially, the starting strip is laid, and then the lining boards are laid on the previously filled sheathing. It is best to sheathe the walls of the veranda using staples, without glue or screws.

Larch is the most difficult to install, but it's worth it. Even for the most comfortable veranda there is no point in purchasing cedar or ash if you need to sheathe the room quickly and inexpensively. The best option There will be high-quality spruce or pine, which can be ordered inexpensively from a private carpentry shop, dried, polished the front part and coated with wax.

Even an open or unheated veranda can be covered with such cladding. A pleasant bonus will be the smell of pine forest, which appears when the walls of the veranda are heated by the sun's rays.

Conclusion

The most budget-friendly option for cladding the walls of the veranda will be made from wood-fiber panels or slabs. They are relatively inexpensive, and in terms of comfort, materials made from cellulose fibers are considered one of the best.

If the room needs to be made not only warm and comfortable, but also truly beautiful, then it is best to cover the walls with MDF boards. It will turn out inexpensive and beautiful, but it is worth remembering that high decorative qualities the slabs are provided with a glued polymer film; accordingly, the vapor permeability of the material is significantly lower than that of fiberboard. All the work will not cost much, but there should be no places in the veranda that fall outside the ventilation zone, otherwise the accumulating condensation will quickly destroy all the work.

Veranda at the dacha: the best ideas for decoration

Ecology of consumption. Estate: The veranda is designed to combine the warmth of the hearth and the beauty of the surrounding nature.

Veranda- an extension that acts as a connecting link in the “house - garden” duet. It is designed to combine the warmth of a home and the beauty of the surrounding nature.

It also serves as a cozy corner where you can relax, enjoying the picturesque landscape, or organize fun gatherings with loved ones.

Let’s look at how to equip an extension, and which veranda design to choose to make it bright and comfortable, in more detail.

Peculiarities different types verandas

Before you begin to analyze the intricacies of arranging a veranda, turning it into a cozy corner for relaxation, you should determine for yourself what type of structure the extension has.

Type 1 - open extensions

Many people mistakenly believe that an open veranda is the same terrace in front of the house. Difference between architectural elements is that the veranda is a room attached to the house, and the terrace is a platform on a separate base.

Light and space are the main decoration of open verandas. The design is designed to emphasize this dignity. As lighting design open verandas are ideal pastel shades and shades as close as possible to natural colors.

Beautifully flowering vines planted around the perimeter of the extension will act as an elegant decoration of the space and protect the room from dust.

Type 2 - glazed structures

Whether to glaze the veranda or not is a matter of taste for each owner. You can glaze only part of the openings, or all the windows.

Verandas whose glazing is made without the use of frames look interesting. Glass ceilings literally erase the existing line between interior decoration and the nature surrounding it. Frameless glazing acts as an excellent solution when arranging a winter garden on the veranda.

Do you want a veranda with small area visually make it lighter and more spacious? Then decorate the roof of the extension with glass inserts. The glass roof gives the extension a light and airy appearance.

Verandas with transparent roofs are literally immersed in bright streams of sunlight. The sun's rays will penetrate through the vaults of the domed glass roof throughout the day, enlivening the room with its glow. Your task is only to enhance the effect by decorating the room with furniture in light shades and creating a light atmosphere for the relaxation area at minimal cost.

There are countless options for decorating verandas using texture, stylistic and color solutions. But still, to create a holistic and harmonious image, special attention should be paid to a number of points.

Choosing finishing materials

Most often as finishing materials for flooring verandas are used porcelain stoneware or stone slabs. This cladding method is not only attractive, but also practical. Moisture-resistant materials in an unheated room will not become damp in cold weather. And cleaning the surface from traces of pets or dirty shoes takes a minimum of effort and time.

Wooden flooring can emphasize the texture of brick or stone masonry. All that remains is to complement the interior with wooden beams - and the decor will acquire a light touch of country life.

Thanks to the harmonious combination of untreated natural stone with natural wood you get the feeling that you are not within the walls suburban area, in a house in the forest.

Application wood of different species, each of which has its own unique shade, will allow you to create a unique and memorable interior. And the bright upholstery of upholstered furniture will support the warm color of the atmosphere you have created.

Arrangement of a stone stove or fireplace on the veranda– a fairly common design technique. The presence of a fireplace in a room that needs a heat source will provide an excellent opportunity to relax in comfort while admiring the picturesque landscape.

A cozy fireplace against the backdrop of large spacious windows and neutral furnishings create a calm and relaxing environment.

Finishing space using elements masonry brings the spirit of antiquity to the interior, giving a feeling of reliability and safety.

All about furniture and accessories

The design of a country veranda also means well-chosen, comfortable furniture. It is selected depending on the size of the extension, focusing on the style direction of the design.

If the space is small, you should first determine for yourself which zones you plan to place in the small space.

To avoid cluttering the area, you should choose folding furniture. To save space, use Furniture included with window sills:

reclining sofas,
tables with folding tops.

When arranging a more spacious room, where there is room to spread out, the main decoration of the interior can be a comfortable sofa.

When furnishing a fully glazed room in which the furniture will be protected from the effects of weather conditions, you should only be wary of the fact that it will fade under the influence of sunlight. Therefore, for decoration it is better to choose objects of desaturated tones.

It’s great when the sofas and armchairs of such a cozy corner delight the eye with their natural origin. Wooden coffee tables, chairs covered with cotton covers - all this will become the basis for the decoration of the open extension.

Removable soft seats will help you arrange a comfortable corner for relaxation and add bright touches to the interior, enriching the color palette of the veranda.

Light glass veranda in front of the house is an ideal place for book lovers. Through large window openings from floor to ceiling, the sun's rays penetrate the room most of the day. So why not take advantage of this by creating a home library with reading areas on the veranda?

Looks very harmonious in the interior of an open extension furniture with forged elements. She is able to fit perfectly into styles with an ethnic flavor:

Country – country style, embodying environmental design;
Chalet– Alpine style, characterized by originality, simplicity and romance of design;
Provence– the interior of a provincial French house, enriched with an abundance of floral designs and design techniques when creating a “game of contrasts”.

As decoration floor mats made of dyed straw, wooden sculptures, hunting trophies, porcelain flowerpots with dried flowers and glass trinkets.

Mediterranean style, as well as country or chalet styles, it is characterized by an abundance of wooden interior items. A wide deck board as a floor covering, rough wooden benches and chairs will become ideal solution for finishing ethnic styles. Tablecloths, chair covers and pillows in warm sandy shades will help complement the picture. Ceramic and clay amphoras and flowerpots placed on tables and the floor will add special charm.

By covering wooden elements with a special varnish, you will give them a spectacular vintage look.

When thinking about the design of a veranda in a private house, you should not use a large number of pieces of furniture in the design. They will only clutter up the space.

It is better to decorate the interior with small accessories, using:

original candy bowls and vases;
fancy figurines and boxes;
colorful rugs and furniture covers.

These cute little things will help create an atmosphere of home comfort.

How to choose the right curtains

IN open spaces or verandas framed glass surfaces, there is often too much sun. The easiest way to solve this problem is to hang roller blinds. They are very easy to use.

Curtains for the veranda play a key role in creating a harmonious design. Fabric blackout curtains will save you from the scorching rays of the sun, and sheer and heavily draped curtains will be an excellent attribute for celebrations.

When decorating a veranda in Mediterranean or Scandinavian style Curtains made of light and translucent fabrics are ideal. The combination of light shades creates a festive atmosphere of abundance of light.

Are you planning to create original design verandas at the dacha? Then choose bamboo curtains. Vertical or horizontal blinds will easily fit into any interior you choose.

It is better to use fabric curtains on open verandas only during the warm season, after which they are removed from the eaves and hidden indoors.

Landscaping elements

The real decoration of the veranda will be flower arrangements. Living, beautiful and fragrant flowers will give a feeling of calm and tranquility, creating a favorable microclimate on the sunlit veranda.

An effective addition to the design will be forged shelving, decorated with several pots with decorative foliage plants. And dwarf trees and flowers placed in pots everywhere will unusually decorate the room.

Pleasant aroma essential oils, released by spicy plants, will become an additional source of pleasure from being in the lap of nature.

You can complement plant compositions by diluting them with varnished stumps, tinted branches or beautifully arranged natural stones.

Today there are many interesting styles and original design trends, thanks to the diversity of which you can choose what you really like.

The main thing is that the design of the country veranda is harmoniously combined with both the architectural ensemble of the house and the surrounding landscape. published econet.ru

LiveInternetLiveInternet

– Quotation book

TO BE REMEMBERED. FORGOTTEN NAMES – SOVIET STEP DANCERS AND TAP DANCERS GUSAKOV BROTHERS Soviet st.

New Year's savory appetizer "5 minutes" Savory appetizers.

VERBENA VERBENA Verbena – beautiful perennial- a real decoration.

Skirts, skirts, skirts. (with patterns).

Gardener's calendar for 2016. Puxovaia.

– Tags

– Applications

I'm a photographerPlugin for publishing photos in the user's diary. Minimum system requirements: Internet Explorer 6, Fire Fox 1.5, Opera 9.5, Safari 3.1.1 with JavaScript enabled. Maybe it will work
PostcardsReborn catalog of postcards for all occasions
Yandex.blogs rating buttonsAdds Yandex rating buttons to your profile. Plus, graphs of rating changes per month will appear soon
Online game “Empire”Transform your small castle into a mighty fortress and become the ruler of the greatest kingdom in the game Goodgame Empire. Build your own empire, expand it and defend it from other players. B

– Photo album

– I'm a photographer

– Subscription by email

– Search by diary

– Interests

– Regular readers

– Statistics

Enclosed veranda at your dacha.

One of the most significant advantages of living in a private house is the opportunity to go out into the fresh air at any time of the day or night and enjoy the aroma of flowers in summer or the enchanting smell of rotten leaves in late autumn.
A closed veranda in a country house can easily be turned into a dining room, where the whole family will gather for Sunday lunch: share impressions, make plans and just chat. Important role In creating the necessary mood, not only the view from the windows plays a role, but also the decoration of the veranda. It is she who will help you create an atmosphere of home comfort and peace.

Selection of materials
The choice of materials for finishing the veranda is not only aesthetic, but also practical. As a rule, the word “veranda” means an unheated room. In some cases, an open veranda is more like a gazebo attached to the house, so there is no question of heating here at all. This means that the decor should not only be beautiful, but also resistant to high humidity and temperature changes.

In winter, the room will be damp, and if you use non-moisture-resistant facing materials, then after two or three years the repairs will have to be done again.
Usually, the bottom of the wall is lined with modern finishing material - PVC plastic wall panels. The surfaces of the walls from panels to the ceiling are covered with moisture-resistant paint.

It is not recommended to use laminate when finishing the floor on a closed veranda. Since under harsh operating conditions, in a damp room, even moisture-resistant high-quality expensive laminate will lose its original appearance and shape.

Ceramic tiles, on the contrary, will not lose their wonderful properties and original appearance in such conditions. If used as a floor covering tiles, then it is better to use large tiles as they are easier to install. As a result, if the seams between adjacent tiles are reduced to a minimum, or removed altogether, a smooth, visually uniform surface is obtained.

After the final finishing of the floor, it is necessary to install plastic skirting boards, since they are considered the most durable compared to wooden skirting boards and are not afraid of exposure to moisture.

Warming the veranda.
Of great importance proper thermal insulation the lower part of the walls (under the windows) and the ceiling. The interior decoration of the veranda begins with it. If insulation is carried out correctly, the room can be inhabited until late autumn.

Most budget option Veranda wall decorations in recent years have been plastic panels. This material is resistant to high humidity and temperature changes. In addition, it is quite easy to install and clean.

The only disadvantages of plastic include low environmental friendliness and fragility - it is very easy to break by carelessly moving a chair or accidentally hitting the wall with your knee.

Wooden slats with a cross section of 30*20 or 30*10 mm or a metal profile for mounting drywall can be used as a frame for PVC panels. When using wood, it must be pre-treated with an antiseptic.

Helpful advice! On the walls of the veranda facing the street, it is better to use wooden slats for lathing. Fastening metal profiles can create “cold bridges”, which will significantly reduce the quality of thermal insulation. But for internal walls that are not too smooth, it is better to use a profile on special hangers.

The slats must be fastened perpendicular to the direction of laying the panels. So, if the plastic is placed vertically on the wall, then the slats are installed horizontally in increments of no more than 50cm.

Important! The walls of the veranda are decorated with panels with a pattern from left to right. You can start installing plain panels from any side of the wall.

When the sheathing is ready, a starting profile or mounting angle is attached in the corner of the room using nails or self-tapping screws. The first is used if the adjacent wall will be finished with a different material, and the second will allow PVC panels to be joined together.
Then the first panel is inserted into the guide profile so that the wide mounting flange is directed towards the installation.
To fix the panel to the sheathing, you can use metal holders, or you can simply screw it to the batten with a self-tapping screw.

Important! If you are not using holders to mount the panels, do not overtighten the screw. Otherwise the panel will “drive”.

We insert the next panel so that there is no gap left and fasten it.
Remember that PVC panels are subject to thermal expansion. To compensate for this, it is necessary to leave a gap of 2-3 cm at the top and bottom of the wall and cover it with a plinth.

MDF - cheap imitation wood

Another popular finishing material is MDF panels. They are somewhat stronger than plastic, but less resistant to moisture. You should not use this material on open verandas, but for closed ones it is quite suitable.

MDF panels are installed in the same way as plastic ones.

Wooden lining - a classic of the genre

When listing materials for finishing a veranda, it is impossible not to mention the most traditional of them - wood. Most often this is the so-called lining.

Lining is a cladding board, up to 22mm thick, with special grooves that facilitate installation and joining.

This material is used to cover not only the walls, but also the ceiling of the veranda. After treatment with antiseptics, the lining will serve you for up to 20 years. Talk for a long time about the advantages of wood over artificial materials not necessary. Just look at the delightful woody smell that will be felt on your veranda for many years.

Choosing wooden lining

First of all, it should be said that according to the production method, the lining is divided into jointed and solid. In the first case, the highest quality pieces of wood are joined in a special way. Despite the fact that this material looks excellent - there are no knots, cracks or other putty defects on it - it is not suitable for finishing an open veranda. With high humidity, cracks may form at the splice site, which will greatly spoil the appearance of the finish.

A modern country house is designed to provide the best living conditions. Currently, all conditions have been created for this - an abundance of design solutions in house construction, a variety of traditional and new proven materials.

Users often search:

Classic terrace design

open;
partially closed;
closed.

Open veranda

This view is good when located on the leeward sunny side. Due to the absence of fences, there are practically no boundaries between the veranda and the space surrounding it. It is better if the floor height of such a structure is low. This is especially true when children live in a country house.

Photo: 3D project of a country house with a veranda

Closed terraces

This type is most suitable for year-round use as an additional room. Even in the winter cold, closed from the wind and frost, you can enjoy hot tea while admiring the beauty of nature. In this case, it is better to combine the interior decoration of the veranda with insulation of all its walls. This will minimize heating costs for the house as a whole.

Veranda finishing options

The manufacturing process of the described structures is not complicated and is quite accessible with your own hands, as is finishing the veranda inside or outside. Since the topic of the article involves a more detailed introduction to the second part of the work, we will consider them, focusing on possible options, their features, advantages and disadvantages.

Currently, the interior of the veranda is covered using the following materials:

wooden lining;
plastic panels;
MDF panels;
cement plaster and cement-based artificial stone.

Decorating the veranda with wood

The classic option is the use of natural wood materials for finishing walls not only in the interior of the house, but also in extensions. The lining is distinguished by its good appearance, ease of installation and low requirements for the quality of base preparation.

Thematic material:

When finishing the exterior, you can sheathe the veranda only by installing the lining parallel to the soil with the ridges up to prevent the accumulation of water in the grooves.

Plastic finish

Also quite a common option. It is better to decorate a closed veranda with such panels. In this case, temperature changes are less sensitive to the material, which helps to increase its service life.

Unlike wood materials, plastic is practically not afraid of water. Modern retail chains offer many options for both color and texture design of plastic panels.

Installation of plastic trim is easier than wood trim. Thanks to the considerable width of the panels, the process is faster.

Interior finishing with MDF panels

Thanks to the large number of colors that imitate natural wood, stone and even leather, this interior decoration of the veranda will have a very high quality look. With all its advantages, MDF also has a significant drawback - very low moisture resistance. In this regard, it is better not to use them for finishing open terraces. Otherwise, additional protection will be required in the form of varnishing all sides of the panels.

Decorating veranda walls with cement materials

In the case of using cement-containing building materials - blocks with one or another filling, or bricks - to make a terrace, it is better to finish the walls with mixtures or parts that are similar in composition.

Please note that gypsum-based plaster and gypsum artificial stone are not suitable for covering the walls of open verandas.

Polycarbonate for finishing terraces

As already noted, the materials listed above, used in finishing the interior space of verandas, have certain disadvantages that limit their use. In recent years, external walls and roofs of terraces have increasingly been covered with polycarbonate - an artificial transparent material that allows you to create a closed space while maintaining visual contact with the surrounding nature.

There are two main types of this plastic:

Cellular. It is characterized by minimal weight, high light transmittance, and durability, therefore it is often used for roofing terrace roofs.
Monolithic. Its properties are close to real quartz glass, but unlike it it does not have such high fragility. This determined its use in vertical frame structures - windows, doors, transparent walls.

Covering veranda walls with cellular polycarbonate is quite easy to do yourself. To work you will need a minimum set of tools:

cutting knife - any construction knife will do;
screwdriver

The polycarbonate installation technology involves the following list of works.

In the absence of cutting experience, cutting sheets to the required sizes can also be done by workers at construction bases.

Veranda - not just non-residential premises. This is the “face” of the house, where in the summer you can have breakfast while enjoying the morning coolness. And if the veranda is insulated, it can become a full-fledged recreation area even in winter. A complete finishing of the veranda will help with this.

General requirements for materials

There are quite strict requirements for materials used for finishing work:

Resistance to temperature fluctuations. Regardless of the type of veranda (open or closed), usually the temperature inside and outside is almost identical, provided that the building is not heated.
Moisture resistance. High humidity- another problem that the finishing material must cope with. This is especially true for the open type of veranda.
Resistant to fading. Typically, verandas are rooms where there is a lot of light, which is why the finish can fade under bright sunlight, losing its aesthetic qualities.
Safety.
Price.

There are several requirements for materials

These qualities apply to materials that will be used both inside and outside the veranda.

From this video you will learn some useful tips for decorating your veranda with your own hands:

External works

When choosing what to cover the outside of the veranda with, you need to focus on the appearance of the house, otherwise the room will stand out from the overall picture. Versatile materials can be combined with almost anything. The following are called universal:

tree;
plastic;
stone and brick.

Wood

Wood is difficult to work with. Without proper care, this material quickly deteriorates. Its positive aspects include the following features:

An attractive look, which is achieved through a variety of textures.
Thanks to wood, you can implement veranda projects in any style. From old Russian, decorating the corners of the room with carved pillars, to modern modern with a little processed wooden surface. It looks great with glass, stone, brick, wood and forged elements.
Environmental friendliness.

The disadvantages include:

High exposure to weather conditions. Various impregnations and coatings protect against environmental influences, but do not guarantee complete protection of the veranda. In addition, procedures to protect the tree will have to be done regularly, which takes time and effort.
Wood is a fire hazardous material.
Financial component. The tree is expensive. Add to this the cost of regular board maintenance and you get a pretty substantial amount.

Bricks and stones

Usually, not the entire veranda is made of stone or brick, but only the foundation and several pillars that support the roof of the structure.

Let's look at the positive aspects:

Disadvantages of the material:

Stone and brick are expensive materials.
They are not compatible with wooden houses, which can be a problem if you are building a veranda in your country house.
Labor intensity of construction.

Plastic

Plastic is one of the most popular materials. Its advantages include:

Low price.
Ease of operation and installation of the casing.
Wear resistance and resistance to weather conditions. High-quality plastic can withstand extreme heat and frost.
High sound absorption and excellent thermal insulation properties.
The material can withstand high loads.

Under the influence of the sun and temperature changes, the material loses its decorative properties over time.
This is an artificial material.

Internal arrangement of walls

The interior decoration of the veranda is carried out with the following materials:

lining;
decorative plaster;
PVC panels;
MDF panels.

They all have their own installation specifics.

Lining

The interior decoration of the veranda with clapboard is a classic design option.

For a veranda, standard thin lining 5-10mm is usually used. As a rule, this is a board made of wood, wood processing products or plastic. There are differences depending on the profile. There are:

Standard profile. The option features beveled edges that create noticeable gaps between the panels.
Calm. It features relatively soft transitions due to the small angle of edge stitching.
Europrofile. Once the coating is assembled, it forms a specific pattern.

The boards are connected using a special system consisting of tenons and grooves. But keep in mind that working with lining is very difficult. Wooden panels shrink or swell, but plastic ones are not so whimsical.

For installation you will need the following tools:

screwdriver;
clasps (special metal latches).

The lining can be positioned horizontally or vertically. You can also try installing it at an angle. It depends on your skill, imagination and the characteristics of the room. And one more tip - do not try to squeeze the tenons into the grooves all the way.

Lining is one of the types of veranda finishing

Decorative plaster

To decorate the veranda from the inside, plaster is often used. This is a mixture that, after being applied to the wall, turns into a finished coating. There is a huge variety of different coatings:

plaster, which contains colors to give the walls the desired color;
plaster imitating stone;
Venetian, which repeats the texture of marble.

The appearance of the veranda also depends on the technique of applying the material. Different results can be achieved by simply using a little more plaster or by making different types strokes. In addition, with the help of plaster you can create sgraffito - stucco paintings on the walls.

MDF and PVC panels

MDF panels (Medium Density Fiberboard) are wood fibers that were obtained by processing solid blocks of wood. After this, the chips are pressed under high pressure and temperature. The veranda can be sheathed with slabs up to 10 millimeters thick. Ready block has the following qualities:

has high sound absorption rates;
withstands high and low temperatures;
convenient to use.

But the material also has a minus - it reacts poorly to moisture (swells and disintegrates). If condensation often appears in the veranda, MDF panels will not be suitable.

For ease of use, several formats of MDF panels are made:

separate sheets;
lining, etc.

They just need to be secured to the wall with screws.

PVC panels are a material made from polyvinyl chloride. It's very comfortable. Since the panels are plastic, they can be bent to fit any room shape.

PVC panels have the following positive aspects:

light weight;
high resistance to contact with water;
resistance to high temperatures;
low cost.

But there is also a minus - the material cracks in the cold. So if winters are harsh and the temperature often reaches -15, it is better not to use PVC panels in an unheated veranda.

If you do all the work yourself, it is advisable to choose a material with pins and grooves for quick installation. The working process is as simple as with MDF.

Special fasteners are used for installation. You need to screw the panels in place with a screwdriver. To avoid damaging the material, perform the operation at low power. If you bought a kit ready for installation, then you can do without a screwdriver at all, using only clamps and screws.

Improvement of ceilings

The ceiling is the part of the structure that bears the heaviest load. It is constantly exposed to moisture due to seasonal precipitation, and in winter it must also withstand the weight of snow. Pick up the right material not easy. It must be at the same time: durable, lightweight, and moisture resistant.

Two materials meet these parameters:

polycarbonate;
weaving.

They are easy to install and do not require special maintenance.

The ceiling is one of the heavy elements

Polycarbonate

Polycarbonate – transparent modern material. It is very reminiscent of glass, but without its disadvantages. In particular, polycarbonate is durable and very lightweight.

It has several types:

Monolithic. It is a solid material produced in the form of plates. Externally it resembles glass. It can withstand loads and is therefore better suited for roofing.
Cell phone. Inside, this polymer has a honeycomb division. It is less transparent, but has the same high light transmittance. This polycarbonate retains heat much better and is much lighter than its monolithic counterpart.

Polycarbonate can be transparent or colored. It is easy to secure the material. To do this, create a frame on which you need to install the sheets. They are fastened using galvanized self-tapping screws with thermal washers to prevent leakage.

Weaving

If you want to original ceiling on the veranda, then the cheapest alternative to design solutions can be a wicker option. Externally, it looks like the walls of a basket, but it looks stylish. Typically used for weaving:

thin moisture-resistant plywood;
veneer.

The installation procedure in the house is quite simple:

Saw the sheet into several even strips. To do this, you can use a machine so that the cuts are neat, otherwise the weaving may be fragile.
Weave the fabric on a flat surface. Weave in a checkerboard pattern, tapping the protruding edges with a rubber mallet.
Hide the “tails” of the stripes on the wrong side of the weave.
Since the structure is quite heavy, it is impossible for one person to lift it. To make the job easier, use ropes around the edges. It is better to lift from the door side.
The material can be secured with slate nails.

To hide the joints, install skirting boards. For greater aesthetics, coat it with varnish.

Flooring

The final chord in the design of the veranda is the choice of flooring. The options may be the following:

terrace board;
tile;
rubber;
linoleum;
cement.

To finally make your choice, think about whether you will walk on the veranda barefoot or in shoes. In addition, you can lay a carpet or rug on the floor in the veranda.

Terrace board

Deck board is essentially treated lumber. This is a three-layer design:

Bottom layer. This is a covering with ventilation slots.
Middle layer. There are cavities here that allow the wood to expand without deforming the overall structure.
Upper. This is the front part of the board, so it is smooth.

This material has many advantages:

the board is easy to install;
the floor is not much different from wood;
The coating is durable and heat-intensive.

To prevent the floor from deteriorating, it is better to give preference to boards that are varnished. Installation must be done on a frame with lag through it. Moreover, the logs need to be placed perpendicularly with an interval of 40-60 cm. After this, the board can be fixed. It is better to use nails or screws as a fastener.

Tile

The slab is a difficult material to install. But the difficulties are worth it, since the tiles have the following positive qualities:

it is impact resistant;
easy to clean and withstands precipitation;
differs in a variety of designs.

Installation of tiles is carried out according to the following steps:

First, the surface needs to be leveled.
Next comes the screed.
Preparation of materials. You will need special tile adhesive.
The tile is leveled. You need to install special crosses between the corners to even out the dimensions of the seams.
Next, mask the joints with a special grout. If grout gets on the tiles, don't worry. It will wash off the surface, but will remain in the gaps.

But there is one difficulty - cutting. This must be done if the room has non-standard dimensions. This operation is almost impossible to do without a tile cutter, although you can try replacing it with a grinder.

Linoleum

If the classic wall decoration in the veranda is lining, then for the floor it is linoleum. The coating is made from polyvinyl chloride in combination with polymers. The advantages of the material include:

waterproof (but only if attached in one piece);
impact resistance and wear resistance;
ease of installation and maintenance;
huge assortment;
low cost.

Even a non-professional can install the material. The main thing is that the floor surface is fairly level. Next you need to roll out the roll, level it and secure it near the baseboard. If the linoleum has been cut, individual sections can be fastened together using a special strip. But due to the fact that the material allows cold to pass through, insulation must be used.

Rubber

Rubber coating is the rubber that covers the floor. On the market it is presented in slabs or monolithic blocks. The positive aspects of the material include:

impact resistance;
absolute waterproofness;
resistance to temperature changes;
phenomenal wear resistance;
wide choice of design solutions.

It is important here that the floor is level. To connect the boards together you need polymer glue.

The installation procedure is similar to working with regular tiles. But in this case, crosspieces are not needed, because the plates fit more tightly. If rolled rubber is used, the joints are sealed using a soldering iron or a hair dryer.

Rubber has its own nuances

Cement mixtures

You can finish the floor in the veranda in the standard way using cement. Despite the banality, the option remains the most labor-intensive. At the same time, such a floor can be laid even on a monolithic foundation. As a result, you will get a coating that is different:

impact resistance;
waterproof;
resistance to temperature changes.

It does not require careful care. True, after the cement mixture is installed, it needs to be polished to a shine with a special machine.

There are many other versions of finishing materials such as OSB boards or self-leveling flooring, but all of them are in less demand among consumers.

Country veranda covered with siding. Finishing a closed veranda at the dacha. Interior decoration of a veranda in a private house: photo of how to cover the ceiling and walls, what to make the flooring from and how to paint it. – Synthetic coatings

Classic terrace design

Open veranda

Closed terraces

Veranda finishing options

Decorating the veranda with wood

Plastic finish

Interior finishing with MDF panels

Decorating veranda walls with cement materials

Polycarbonate for finishing terraces

Do-it-yourself wall repair in the veranda: finishing options, photos, videos

Do-it-yourself wall repair in the veranda: using wood

Do-it-yourself wall repair on the veranda: materials, installation, photos, videos

Exterior materials

Siding

Plastic

Brick and stone

Materials for interior finishing

Tree

Drywall

Plastic panels

Let's sum it up

How to decorate a veranda at your dacha in an original way

Purpose and types of verandas

Ceiling finishing

Independent installation of a veranda ceiling from PVC panels

The use of other materials for finishing the ceiling

Self-clad veranda walls

Veranda flooring

External cladding

How to sheathe the inside of a veranda inexpensively

Requirements for finishing material

Popular materials for covering verandas

Material for a cold veranda

Decorating the veranda with wood

Conclusion

Veranda at the dacha: the best ideas for decoration

LiveInternetLiveInternet

– Quotation book

– Tags

– Categories

– Applications

– Photo album

– I'm a photographer

– Subscription by email

– Search by diary

– Interests

– Regular readers

– Statistics

Enclosed veranda at your dacha.

Classic terrace design

Open veranda

Closed terraces

Veranda finishing options

Decorating the veranda with wood

Plastic finish

Interior finishing with MDF panels

Decorating veranda walls with cement materials

Polycarbonate for finishing terraces

General requirements for materials

External works

Wood

Bricks and stones

Plastic

Internal arrangement of walls

Lining

Decorative plaster

MDF and PVC panels

Improvement of ceilings

Polycarbonate

Weaving

Flooring

Terrace board

Tile

Linoleum

Rubber

Cement mixtures