Original taken from pervakov in How to do it: Useful things from plastic bottles
From plastic bottles you can make almost anything, from sprinklers and bracelets to a three-story pavilion.
You just need to use your imagination, you need to find the number of plastic bottles (which is not very difficult nowadays), and of course, get the right tools that will help you achieve the desired result.
Let's start looking at several options for products made from plastic bottles.
Cosmetic bag made from a plastic bottle
1. To make a handbag, you first need to prepare two 5-liter plastic bottles.
Cut these bottles as shown in the picture. Pay attention to the fact that the cap is cut as low as possible to the bottom of the bottle, where the plastic field is thick and elastic.
2. Prepare your thread and hook. To make holes like those in the picture, you can use an awl, soldering iron or punch.
The holes should be approximately 7 mm apart from each other and from the edge.
3. Let's start making the handle. You need to align and make holes in the lid.
4. Now tie the resulting blanks.
5. Sew with a double stitch. The first seam should be laid along the edge of the knitting, and the second in the holes.
6. Sew on a handle to make it easier to open and carry the purse.
7. If you want to hide the zipper joint, you need to sew a tied plastic strip on the back, the width of which should be 1 cm, and which should have holes in the middle.
8. To make a cosmetic bag you need to prepare a pattern. You can use templates or draw by eye.
9. All parts of the cosmetic bag, not counting the sides, must be folded with their concave parts facing each other.
10. Place the pattern under the plastic and press it with a ruler. Next, make the holes. A template made of thick cardboard that you can put on top of the work can help you. When you make holes around the edges, you will have bulges of plastic that you can simply cut off with a knife.
11. When all the parts are ready, crochet everything. This needs to be done completely with the bottom and top, and for the rest, only the side parts. Then sew.
12. The top and bottom need to be tied. Knit 2 double crochets in the spaces between the parts. Next, fold the bottom. Sew on.
13. All that remains is to attach the zipper, install the tied strip on top and sew on the lid. You can decorate the box according to your taste.
DIY glass holders made from plastic bottles
You will need:
1.5 liter plastic bottles
Iron tray
Napkins
Brush
Pencil
1. Cut off the bottom of a plastic bottle
2. Place the iron tray on gas stove and heat it up. When it warms up, place the cut bottom of a plastic bottle on it. To ensure smooth and rounded edges, twist the tray in different directions.
3. Place the bottom of the bottle on a napkin and circle it, while moving 0.5 centimeters from the edge.
4. Cut out the napkin and peel off its top layer.
5. Now you need to coat the bottom with glue.
6. Insert the napkin into the bottom and spread it out carefully.
7. Apply glue and varnish with a brush on top of the napkin - for decoupage.
8. Allow the product to dry and harden.
DIY handbags made from plastic bottles
Such bags can be used by children to store pencils, construction sets, etc. Adults, in turn, can use these bags to store clothespins, cookie cutters, etc.
You will need:
Plastic bottle
Eyelets
Ribbon (can be replaced with lace)
Candle (can be replaced with a needle with a plastic top or an awl)
1. Prepare a plastic bottle and cut off the top (choose the height yourself).
2. To make holes on the same line, you can use an elastic band. The holes can be made with a heated needle or awl and their diameter should be about 2 mm.
2. Define right size top, which will be made of fabric. IN in this example The width of the fabric is 26 cm + 2 cm allowance, and its height is 15 cm (including allowances).
3. Now you need to iron the folds (1 cm at the bottom, folded twice at the top by 0.5 cm and 3 cm - this is done in order to hide the raw edge).
4. Install the eyelets and stitch the top edge.
5. We make a side seam. To do this, you need to step back exactly 1 cm from the edge. If you pay attention to the image, you will see that the bottom is rolled up. It must be stitched in unfolded form. Next you need to iron the seam.
6. We attach the top to the plastic bottle. First turn the top inside out and then place it on the bottle. This must be done so that the folded edge can pass exactly under the holes. Then you need to lift it, and the ironed fold should be 1 mm below the holes.
7. Lift the fabric and thread the string through it.
Master class from plastic bottles. Mobile phone holder.
You can also make a good and very useful holder from a plastic bottle. mobile phone. You need it when you urgently need to charge your phone, you find an outlet, but there is nowhere to put the phone.
Prepare a 0.5 liter plastic bottle and pierce a hole with a knife to further cut off the unnecessary part of the bottle.
Using scissors or a utility knife, cut out a circle for the fork.
All that remains is to insert the cord from the charger and plug into the outlet.
Master class from a plastic bottle. Chandelier.
You will need:
50 plastic bottles (volume 0.5 l)
Flower wire
Regular wire
Bulb
Spray paint
Glue (preferably a glue gun)
Scissors
Stationery knife
1. Prepare plastic bottles and remove labels from them.
2. Cut each bottle into the shape of a flower (see picture). To do this, use a stationery knife.
3. Spread the "petals" of the flowers.
4. Once you've completed steps 1-3 with all 50 bottles, it's time to paint them. Use spray paint or you can take a little more time and paint each flower acrylic paints. You can choose any color. You can also vary the colors by making some flowers one color and others another.
5. Make a circle out of regular wire. Wind the jute and use glue gun glue it to the wire. You will have the base of the chandelier to which the flowers will be attached.
6. Using floral wire, attach each flower to the circle you made from the wire.
There are two ways to attach floral wire to a flower: wrap it around the neck, or glue it.
This is what the first layer looks like.
7. Repeat all steps to make several layers. In this example, 3 layers were made.
8. Use jute to attach the chandelier to the ceiling (see picture).
What you can do from plastic bottles. Waterer.
Simply make holes in the cap of a plastic bottle with an awl or nail.
Products made from plastic bottles. Funnel.
Plastic products from bottles. Money box.
1. Prepare a plastic bottle. Rinse it off hot water with soap and leave to dry.
2. From colored cardboard, cut out details such as ears, eyes, snout and nostrils.
3. Use glue or double tape to attach all the parts.
4. Wrap the bottle with patterned paper.
5. For the legs, you can use empty spools that need to be glued to the bottle.
6. Make a cut at the top for coins.
We make a dispenser for plastic bags from a plastic bottle
You will only need one 3-liter plastic bottle in which to store your plastic bags.
Just cut bottom part bottles so that you can put packages in there, and a neck so that you can carefully take out one package at a time.
You can sandpaper make the edges of the bottle smoother.
Making bracelets from plastic bottles
You will need:
Plastic bottle
Adhesive tape (the width of the bracelet depends on the width of the tape)
Double-sided tape
Felt (or other material)
Scissors
Stationery knife
Decorations
1. First, wrap some adhesive tape around the bottle. Make several "rings" as shown in the picture. Everything needs to be done carefully and evenly, since it is the tape that will determine how smoothly you can cut the bracelet out of the bottle.
2. Using a utility knife, carefully cut off each ring.
3. Carefully remove the adhesive tape.
4. Glue double-sided tape to the resulting plastic bracelet.
5. Prepare two felts different color and cut out parts from them different sizes. Carefully glue each piece to the double tape on the bracelet.
6. Use scissors to cut off any excess parts.
7. Start decorating the bracelet the way you want. You can use beads, sparkles or make flowers.
It is very beautiful and very easy to make such curtains.
Just prepare several plastic bottles and cut out the bottom of them - you will get a shape resembling a flower.
Make several holes in each "flower" using a heated needle.
Prepare fishing line or strong threads and connect all the “flowers”.
The product can be hung on a window or in a doorway.
You can also make a hole in the middle of each “flower” for LED bulbs, and you will have a beautiful glowing garland.
You can use bottles of different colors, or use spray paint to give it a different look. various colors product.
Irrigation from plastic bottles for the garden
You will need:
Plastic bottles 2 l
Awl or screwdriver
1. Using a knife, make two small cuts at the base of the bottle and two more in the middle. Also use an awl to make two small holes in the bottom of the bottle.
2. Pour water into the bottle to check whether the water seeps out quickly or drips gradually, ideally you want the water to drip and not flow.
3. Dig a small hole in the ground where irrigation is needed and insert a bottle with holes into it. Next, fill the bottle with water.
Photos of products made from plastic bottles
Frame made of plastic bottles (video)
Products made from plastic bottles. Three-story pavilion.
What to make from plastic bottles for the garden and cottage
| . |
When a person has free time and imagination - any useless thing will turn into a work of art. Many “skillful hands” use crafts from plastic bottles as elements, as well as in the form of furniture. Colored bottle caps are used to make mosaic panels that cover the surfaces of walls, paths, and fences.
The range of creative possibilities is so wide that you often don’t know where to start. We will help you understand what is suitable specifically in your case and what crafts to decorate the empty space with.
Application of plastic bottles
After several attempts to make a souvenir from a plastic bottle with your own hands, your one-night hobby will grow into a full-fledged hobby. It's so simple and accessible! There is practical and decorative use products from plastic bottles.
Practical- This:
- storage containers,
- feeders,
- stands,
- plant containers,
- furniture
and even carports, greenhouses, washbasins, Summer shower etc.
Crafts from plastic bottles - this and homemade furniture . Looks pretty complex design It's quite easy to make. The only condition is that there must be many bottles of the same type available. Hand-made armchairs, sofas and ottomans are not inferior in comfort to classic factory furniture.
How to make an ottoman from plastic bottles: master class
Decoratively homemade plastic bottles have a wider scope:
- figures made from plastic bottles;
- lamps;
- flowers
- garlands, etc.
Possess one important advantage– availability of material. At the same time, products made from PET bottles are highly reliable, provided that the parts are connected correctly.
Often made from plastic bottles vases, pots and flowers.
In addition, using plastic container, can be original decorate the room, having done artificial bouquet. Roses, tulips or daisies are placed in a homemade vase. If desired, the composition is designed LED lighting. Thus, an impromptu flower will turn into an unusual night light.
What can you make from plastic bottles for your yard?
There is always an empty plot in a dacha. Building a gazebo or an extension is long and difficult, but the “bare”, uncluttered area just “hurts” the eye. Crafts made from plastic bottles for the street will help decorate your courtyard. Using plastic bottles, caps and frames, make beautiful tables with chairs. Such garden furniture It will be easy to surprise guests during a festive feast in nature.
In products made from plastic bottles included and bird feeders, which will not only decorate your summer cottage, but also help birds survive in the winter.
Ideas from plastic bottles: lamps made from caps
From the caps and cut necks, with the help of simple manipulations, they come out original lamps , which will decorate both the interior of the house and the yard. Unusual lamps are harmoniously complemented by plastic compositions designed in the form exotic plants.
Learn to collect simple crafts from plastic bottles possible within 2-3 hours. Go for it!
Crafts from 5 liter plastic bottles
The bulky-looking container is also suitable for decorating the interior or yard. Large plastic bottles are often used to make pet figurines(pigs, bulls, dogs, etc.). Crafts from 5 liter PET bottles - a common decoration for cottages, flower beds and playgrounds. Therefore, there are many ideas for using them, and the most striking examples of products made from plastic bottles are collected on our website. simple but tasteful.
Use of 5 liter plastic bottles: master class
at 05/28/2017 147,894 Views
You can make many useful things for your garden and dacha from plastic bottles
While lovingly arranging our city dwellings, we are no less touching about our summer cottages. We try to improve them, create comfortable conditions for ourselves and add special notes of attractiveness to the even rows of beds and berry bushes. Many summer residents have chosen the most accessible and flexible material- ordinary plastic bottles. We will talk further about what products can be made from it for the garden and dacha!
- House made of plastic bottles
- Country crafts from plastic bottles step by step: palm tree made from plastic bottles
- Plastic crafts: some tips
- Master class from plastic bottles step by step
wonderful hanging pots for cacti from plastic bottles
Resourcefulness in ways to place many plants in the garden area
Plastic bottles in in capable hands will be a wonderful decoration for your landscape
Beautiful flower from plastic caps
Crafts from plastic bottles step by step: from flower pots to fairy-tale towers
Manufacturing idea useful devices and decorative things made from plastic containers are not new. The first attempts led our grandparents to build low fences for paths. Having appreciated the plasticity and low cost of the material, craftsmen from among the people moved on. And now the summer cottages are decorated with full-fledged fences, funny figures and unusual devices made from plastic bottles.
Your children will definitely like this beautiful ostrich from a pet container!
Thanks to imagination and such excellent material as plastic bottles, we have almost limitless possibilities for creating crafts for every taste, any complexity and direction
Paintings made from the caps of plastic bottles and other containers have grown into an entire art movement.
Plastic bottles have long been in great demand among gardeners
Magnificent orange flowers from pet containers
Crafts and decorations for the cottage and garden made from plastic bottles do not require the use of complex tools and specialized skills. The main thing is to have time and desire, as well as enough material. Those who have had both have convincingly proven the limitless possibilities of such needlework, and we have prepared a review best examples crafts.
DIY furniture, flowerpots and a vase made from a plastic bottle
Comfortable and very stylish chair made from plastic bottles
A sheet of plywood, sixteen one and a half liter bottles, adhesive tape - and your site will have a comfortable and durable coffee table. Plywood can be replaced with plastic or hardboard, old table top or plexiglass. From the same materials, slightly changing the design, you can make a garden bench. Some diligent and patient craftsmen manage to assemble full-fledged sofas and armchairs from bottles.
You can even make the basis for a full-fledged sofa from plastic bottles if you fasten them firmly and carefully
Hanging flowerpot or base for flowerpots
DIY ottoman made from plastic bottles
How to make a pouf from pet containers
House made of plastic bottles
Among the summer residents there are also real builders who know that they can build whatever their heart desires from plastic bottles. They collect gazebos, toilets, sheds and even from plastic bottles. The only difficulty with such structures is not in their assembly, but in assembling them required quantity bottles
House with a roof made of 7,000 bottles
Plastic bottles are a good base material for building the walls of a summer house, greenhouse, shower, toilet or other partitions
Greenhouse walls made of containers on a wooden frame
Bottoms from plastic bottles will help you decorate garlands for the garden
Children's playground: flowers made from plastic bottles and toys made from plastic bottles
Crafts made from plastic bottles will help decorate the playground
All kinds of crafts made from plastic bottles are especially attractive for decorating a children's playground. Absolutely safe, they can become the basis for toys, fun decorations, and for creating story compositions. Funny elephants, bees, bunnies and hedgehogs, bright flowers, cheerful lanterns will turn the country island of childhood into a fairy-tale kingdom.
A whole plot for a children's playground from the caps of plastic bottles and canisters
Together with children, you can make small crafts and large plot mosaics from the caps of plastic bottles
Plastic bottle doll
Examples of a variety of crafts that will help the gardener with placement, easy transportation and care of plants
Piglets from the big ones plastic bottles– stable stands for germinating seedlings or small plants
Craft for garden or lawn decor: parrot from pet container
Crafts for the garden and useful little things
Multi-colored turtles will be an excellent element of your garden decor.
With what ease do the “crazy” hands of summer residents transform used plastic containers into useful ones? country fixtures, you can verify by walking through suburban areas. Here, on the trunk of a tree, a washbasin was nestled comfortably, and in the next yard, the gazebo was decorated with multi-colored, fragrant and ampelous geraniums. We have also prepared for you several descriptions of crafts made from plastic bottles for the garden.
DIY bird made from plastic bottles
DIY painted garden owl lanterns
Birdhouse made from a plastic bottle
It’s very easy to make a birdhouse from a plastic bottle
Plastic bottles cut in half will become cute flower pots; it is important to carefully paint them. It is also advisable to take opaque bottles for this.
The ever-tangling and stuck twine for tying seedlings will stop tormenting you if you hide the ball in a plastic bottle. Just cut the bottle in the middle, put it in top part ball, pass the end of the twine into the neck, connect the parts, secure the cut with tape - and your comfortable storage is ready.
Drip irrigation from plastic bottles
Your seedlings will not wither, even if you go away for several days: install semi-automatic watering. Once again, plastic bottles come into play. We cut off the bottom of the bottle, about 2/3, drill 4-8 holes in the cork, close the neck, bury the bottle upside down, pour water - and the seedlings are provided with moisture during your absence. A similar garden made from plastic bottles (photo confirms this) will significantly save your time and money.
Automatic watering "Aquasolo" - these are conical nozzles on a bottle with a thread that do not require wasting time on drilling slots, digging into the ground, and so on.
Anthurium with a convenient system automatic watering"Aquasolo"
Maximum space saving: plastic bottles suspended one above the other with a cut tube with water passing through them
- For the same seedlings, plastic bottles make excellent containers. After cutting the bottle in half and taking the bottom, pour the prepared substrate into it, plant the plants and place them on a shelf made of wooden planks. This design is also suitable for decorating your home with flowers.
Beautiful hanging pots made from plastic bottles will not only decorate the interior, but also make it unique
Excellent flowerpot made from a shampoo bottle with your own hands
Arrangement of compact placement of seedlings or small plants at the dacha
Bird feeder made from a plastic bottle
Some crafts made from plastic bottles for the garden amaze the owners with their ingenuity. By placing a bottle on a hose and making many holes in the bottom, you will get an excellent diffuser for watering your garden. From a five-liter container you can build an elegant lamp for the veranda, and a container from under mineral water Suitable as a bird feeder.
Bird feeder made of plastic container
A simple and convenient hose sprayer for garden watering
- Plastic bottles will help you save trees from pests. Cut the bottle lengthwise into two halves, fill it with a mixture that is attractive to pests and add insecticides, and bury it at the base of the trunk.
- From bottles you can make a magnificent decorative all-weather and all-season flower bed. Just paint the bottoms of the bottles in different colors and make a wonderful carpet out of them by sticking them open side into the ground. The carpet pattern can be pre-reproduced on paper.
Decorating flower beds with pet containers has become very popular
- One Brazilian engineer did the calculations and built a solar collector from plastic bottles. The structure can be placed on a summer cottage, connected to storage tank, and you will always have a warm shower.
Device solar collector from plastic bottles
Automatic watering of seedlings and ornamental plants in your absence, using a plastic bottle dug next to the roots with small holes drilled in the neck or cap
Suspended one above the other, cut plastic containers– the fastest and most economical way out of a situation when you need to germinate a lot of seedlings in a limited space
Making an owl from a plastic bottle with your own hands
Bottles for germination and winter holding of plants - an opportunity to save space and ensure good irrigation and drainage
Products made from plastic bottles: artistic masterpieces
Magnificent dandelions from pet containers will never cease to delight you and your guests
Fantasy craftsmen is so diverse that it leads to the appearance of strange animals, fairy tale and cartoon characters, exotic plants, and original thematic compositions in summer cottages.
We cover the bottom of a plastic bottle or cup with dry twigs and get unusual candlestick protected from the wind
Rainbow decor for a garden, workshop, garage: a fountain of spirals cut from multi-colored plastic bottles
Plastic bottles are used not only to decorate the garden, but also to decorate the home.
Country crafts from plastic bottles:
If you have a small pond on your site, you can arrange it plastic palm. It's not at all difficult to make. You will need:
- 10-15 brown plastic bottles (for the palm trunk);
- 5-6 green bottles (preferably long);
- iron or willow rod;
- an awl or drill for making holes;
- sharp knife or scissors for cutting bottles.
A palm tree made from plastic bottles looks very beautiful
Now let's start making the decoration.
- Cut all the brown bottles in half. We take the lower parts and use an awl to make holes in the bottom of each of them, equal in size to the diameter of the rod.
Advice! You can also take the tops of the bottles, then you won’t have to make additional holes.
- For green bottles, cut off the bottom by about 1 cm. Leave one of the blanks with a neck, cut it off for the rest to make a loop.
- Carefully cut the green bottles lengthwise into three equal parts up to the loop.
Making palm leaves
- We cut out the edges of the brown parts with jagged edges to create an imitation of a rough palm tree trunk.
- We securely fix the rod in the soil. We calculate the length of the rod by laying out the brown parts on the ground in one row, plus 2-3 cm for the leaves.
We put brown bottles on it. 
Making a trunk for a palm tree
- We string our leaves onto the free top of the rod, finishing the work with a blank with a neck. We make a hole in the lid and screw it onto the last sheet, securely securing the entire crown.
Connection of trunk and leaves
Assembling a palm tree from plastic bottles
Using several rods of different lengths, you can create a real oasis. As you can see, making garden crafts from plastic bottles with your own hands is not so difficult; the main thing is to find a sufficient amount of material and take one of the proposed ideas as a basis.
Step-by-step guide: making fabric pots on bases from plastic bottles.
Hedgehog from a plastic bottle and twine rope: growing seedlings and small creeping plants
Crafts for the garden from plastic bottle caps
You can create real masterpieces from plastic lids
Don't throw away bottle caps. Decorative crafts made from caps from plastic bottles for the dacha and garden can also beautifully fit into its landscape. They will serve excellent mosaic material for decorating fences and walls of a country house.
Bright compositions made from plastic lids will help make your landscape design more fun
Video master class (from plastic bottles of standard capacity):
A path made of plastic covers is not only economical, but also very beautiful
Large-scale red and blue mosaic of caps of different sizes
Having tinkered a little with the pattern, painted and drilled holes in the sides of the covers, you can use them to assemble a curtain for the door. Great option protection from insects!
Lids can also be turned into beautiful tabletop, and into a practical doormat. Use them for decorative finishing internal space.
Gorgeous door curtains made from plastic covers
Carport that diffuses sunlight
Beautiful lanterns in Hawaiian style
Before starting work, remove the labels from the bottles and wash the container thoroughly.
For stability of vertical structures, fill the bottles with sand or small pebbles.
Dragonflies made from corrugated plastic bottles
An ingenious device for collecting fruit from trees
Hanging pots made from pet containers with images of animals will fit perfectly into the interior of a children's room
Choose plastic bottles of different softness for crafts. For example, for the body of a dog or elephant, take a strong base, but for the ears it is better to use softer plastic.
Master class from plastic bottles (step by step):
Useful tips
7. Lift the fabric and thread the string through it.
Master class from plastic bottles. Mobile phone holder.
You can also make a good and very useful mobile phone holder from a plastic bottle. You need it when you urgently need to charge your phone, you find an outlet, but there is nowhere to put the phone.
Prepare a 0.5 liter plastic bottle and pierce a hole with a knife to further cut off the unnecessary part of the bottle.
Using scissors or a utility knife, cut out a circle for the fork.
All that remains is to insert the cord from the charger into the “neck” and plug it into the outlet.
Master class from a plastic bottle. Chandelier.
You will need:
50 plastic bottles (volume 0.5 l)
Flower wire
Regular wire
Bulb
Spray paint
Glue (preferably a glue gun)
Scissors
Stationery knife
1. Prepare plastic bottles and remove labels from them.
2. Cut each bottle into the shape of a flower (see picture). To do this, use a stationery knife.
3. Spread the "petals" of the flowers.
4. Once you've completed steps 1-3 with all 50 bottles, it's time to paint them. Use spray paint, or you can take a little more time and paint each flower with acrylic paints. You can choose any color. You can also vary the colors by making some flowers one color and others another.
5. Make a circle out of regular wire. Wrap the jute and use a glue gun to glue it to the wire. You will have the base of the chandelier to which the flowers will be attached.
6. Using floral wire, attach each flower to the circle you made from the wire.
There are two ways to attach floral wire to a flower: wrap it around the neck, or glue it.
This is what the first layer looks like.
7. Repeat all steps to make several layers. In this example, 3 layers were made.
8. Use jute to attach the chandelier to the ceiling (see picture).
What you can do from plastic bottles. Waterer.
Simply make holes in the cap of a plastic bottle with an awl or nail.
Products made from plastic bottles. Funnel.
Plastic products from bottles. Money box.
1. Prepare a plastic bottle. Wash it with hot water and soap and leave to dry.
2. From colored cardboard, cut out details such as ears, eyes, snout and nostrils.
3. Use glue or double tape to attach all the parts.
4. Wrap the bottle with patterned paper.
5. For the legs, you can use empty spools that need to be glued to the bottle.
6. Make a cut at the top for coins.
We make a dispenser for plastic bags from a plastic bottle
You will only need one 3-liter plastic bottle in which to store your plastic bags.
Simply cut off the bottom of the bottle so you can slide the bags in, and the neck so you can carefully remove one bag at a time.
You can use sandpaper to make the edges of the bottle more even and smooth.
Making bracelets from plastic bottles
You will need:
Plastic bottle
Adhesive tape (the width of the bracelet depends on the width of the tape)
Double-sided tape
Felt (or other material)
Scissors
Stationery knife
Decorations
1. First, wrap some adhesive tape around the bottle. Make several "rings" as shown in the picture. Everything needs to be done carefully and evenly, since it is the tape that will determine how smoothly you can cut the bracelet out of the bottle.
2. Using a utility knife, carefully cut off each ring.
3. Carefully remove the adhesive tape.
4. Glue double-sided tape to the resulting plastic bracelet.
Good day everyone!
Summer time is coming and along with preparing your summer cottage For the gardening season, you need to take care of its design.
Using old and unnecessary things has become not only popular, but also environmentally friendly. Used car tires, corks, plastic bottles - from all this you can create very interesting and unusual creations.
If you have accumulated a lot of plastic bottles, then why throw them away, much less burn them (each burned bottle increases the amount of harmful carcinogens in the atmosphere). You can make many interesting crafts from them, which is what most gardeners do. In this article we will see what can be made from this material.
Let's start with the simplest. If you don’t need any figures on the site, then making flower beds will be just right.
You can make such a wonderful border by digging upturned bottles into the ground. You can paint them, or you can leave them like that. You can make it even more interesting. If you cut them in half and dig them in, not upside down, but downwards, free space pour some soil and plant some flower. Then you will have a border not only of bottles, but also of flowers.
If you insert cut plastic containers into each other, you will get another option for a border that does not need to be dug in.
On next photo a two-tiered flower bed is presented. If desired, you can make several more tiers.
Overall, there are a lot of options. The main thing is to show your imagination.
You can make a path in your garden using plastic bottle caps.
If you decide to do interesting crafts, then the examples given here may help you realize your plans.
A wonderful craft that uses and Additional materials in the form of old shoes and fittings.
And this photo shows original design sofa made from plastic bottles.
If you want your garden to look like a house somewhere in the tropics, then you can “plant” palm trees like these.
By the way, you can fence not only flower beds with plastic bottles, but also make beds.
Also, if there are very, very many bottles, then entire structures can be made from them, like this gazebo.
You can also use bottles to make a fence for your property. For example, this fence.
We will decorate it very interestingly summer veranda at his dacha, making both furniture and elements of room decor.
Well, if you have a river or some other body of water nearby, then such a boat will be simply necessary.
The most traditional thing that can be made from plastic bottles, and what many people do successfully, is a bird feeder. Five-liter containers work well here.
If you are an amateur gardener and do alpine coaster, then the slide in mexican style decorated with cacti you will like it.
And, of course, flowers. This handmade product can be created from almost any material. Paper flowers - origami - are most often made for holidays or other events. Flowers made of silk or satin. Plastic also works well for this purpose.
These flowers can be used to decorate personal plot, and put it in a vase in the room.
There are a lot of options for making such a craft - it all depends on your imagination and capabilities. Some of these options will be discussed below.
How to make flowers with your own hands (step by step instructions)
Plastic bottles can also be used to make decorative flowers. There are a lot of options for such crafts, here we will look at the most common ones.
In the first version, a craft like this is done.
To make such a flower, take a bottle and cut off its top and bottom parts. As a result, we get three blanks.
Now we take the upper part and make cuts from the bottom to the neck, so that we get flower petals and stamen filaments.
Their number may vary. Thin strips will be sepals, which must be bent to the sides and twisted using a knife or scissors.
In the same way, we bend and twist the wide strips that will be the petals. Only the stamens will remain up. As a result, we obtain the following construction.
To make the flower look more beautiful, you can paint it with nail polish. You choose the color yourself, which one will look best.
You can make the same flower from the bottom of the bottle in the same way. There is no need to tighten the cut parts.
Another interesting and easy way to make flowers. Here we will use multi-colored bottles, their corks and wire for the stem.
Here we need the bottom of the bottle. Carefully cut it off and cut out the petals.
A wire is threaded into the middle of the flower and secured on the outside with a loop.
A lid is glued in the center of the flower. As a result, we get a flower, but still with a wiry stem. At the next stage we make the stem.
To do this, cut a strip about half a centimeter wide from a green bottle.
We wrap the stem with this strip. In order for the plastic strip to wrap well, it must be heated with a lighter.
We cut out leaves from the same green bottle and attach them to the stem in the same way.
Thus, the plastic flowers are ready.
This option for making flowers is very simple. We string circles cut from a bottle onto the wire that serves as the base of the flower.
They can be made in different colors. And then decorate even a flower bed in the garden.
If you use the bottom of a bottle, you can make this type of flower.
And, I would like to provide a photo diagram of another interesting product.
Everything is simple here too. We make a template of petals, according to which we cut out a blank from a red bottle. Cut out leaves from the green one. By heating the red blanks we give different shapes. The diagram also shows that you can use scissors to cut small notches along the edges. That is, make the flower double.
After this, the finished flower petals are attached to the wire. It itself is wrapped in a green stripe (as in the version above) and leaves are attached. As a result, we get a finished flower.
Making pots and vases for flowers for the country house (master class for beginners)
Since we previously talked about making artificial flowers, how not to forget about real ones and not make a pot or vase for them. You can, however, put an artificial flower made right there in it.
I want to start from the very beginning simple option. Probably, few would have guessed about it, it is so simple to manufacture. Here we only need a bottle and an unnecessary CD.
Cut off the top part of the bottle. The size of this part depends on what will be planted in the pot. Leave the plug on the neck. After spreading glue on it, glue this part to the disk. The vase is almost ready. To make it “beautiful” we paint it either one color or paint it. By the way, the lower part remaining from the “halving” can also be used for a pot.
In the next version flower pot, the upper and lower halves are combined together.
If you cut off the bottom part of the bottle, it stands well, and then glue a cork nose to it, make eyes, then you can get a decorative pot like this.
Another very simple option for making a flower vase from a bottle. This option is well suited if you decide to decorate the wall with flowers such as petunias. For this purpose, we cut out the side wall of the bottle and make holes through which we pass the rope.
To hold the bottle, we make knots at the bottom on which it will hang. Having poured the earth and planted our favorite flowers, we will get such beauty.
Similar flowerpots can be made in other ways. We cut off the top part, close it with a cork, and paint it as needed. After this, we fill the soil, plant the plant and hang it where necessary.
Check this one out step by step video master class, you will love it!
These are the wonderful vases you can make. If you have an idea of your own that you used to make a craft, be sure to share it with the readers in the comments at the bottom of the article. Maybe someone else would also like to do something similar.
Beautiful zoo at the dacha made from bottles
Many people are now striving to make beautiful sculptures on their property. This is due to the fact that most people come to their dacha not only to stand in the garden all day long, but also to take a break from the city. And if your dacha is beautifully decorated, then your vacation will be good.
Most often, the figures are made in the form of animals. Making such crafts is quite easy, and the material is always at hand.
This frog princess looks good on a stone.
You can make an African composition like this.
What would your vegetable plantings looked attractive, place such a wonderful donkey among the pumpkins or zucchini with eggplants.
Or such a cunning fox.
If you show your imagination, you can even place penguins in your garden.
There is no need to talk about our traditional forest and cartoon animals, such as these bunnies. Children will surely love them.
If you collect several bottles of different sizes, you can settle a family of pigs somewhere under a bush.
Previously, we talked about making a donkey, which, if you place it among the vegetables, you can decorate the garden bed with this craft. And if you attach a cart in the form of a vase with flowers to it, you will get an outdoor flower bed.
Good luck with your production wonderful crafts and creative success!