How to make a gun safe with your own hands, the drawings of which were developed taking into account the requirements of regulations of the Russian Federation.
The presented design is intended for the safe storage of ammunition and weapons at the place of residence individual and provides for fastening to the wall using anchors.
Requirements for safes, according to the appendix to order No. 288:
must be locked
made from high-strength materials
ensure safe storage
exclude access to them by unauthorized persons
have a metal wall thickness of at least three millimeters
place in rooms no closer than: 1.5 (m) from front door; 0.5 (m) from window openings; 1.0 (m) from heating devices
FRAME
Dimensions of metal sheets GOST 19903-74, in (mm):
- rear wall (3x294x1294)
- two side walls (3x250x1294)
- lower and upper walls (3x300x250)
- partition (3x200x1294)
- six shelves (3x100x200)
- large frame 3x294x1294 (width 10)
- small frame 3x280x1280 (width 7)
In the back wall, under anchor bolt, drill three through holes with a diameter of 10 (mm).
The large and small frames can be welded from metal plates of the appropriate width.
DOORS
Dimensions metal sheet will be 3x272x1272 (mm). We will attach a small handle to the door and weld hidden hinges - “mothers”.
Procedure for assembling the structure
An introduction to how to make a gun safe with your own hands, the drawings are available, all the details are prepared - look at the presented drawings:
1. Let's put it down back wall onto a flat surface and secure it.
2. Let's set the top and left side walls in the desired position, while strictly maintaining the same angles between them (90°). Let's fix them in the correct position and weld them together in several places. Let's check that the sheets are installed correctly.
3. Let's set the bottom and right side walls in the desired position, by analogy with step 2.
4. Let's set the side wall of the safe's internal shelves in the desired position and fix it in the correct position by analogy with step 2.
5.
Let's check all the corners of the welded structure. Having made sure that all dimensions and angles correspond to the drawings, we proceed to welding the structure (with inside) along the joint line.
6.
Let's install the shelves at the required distance from each other and weld them to the safe body.
7. Let's weld a door frame from a large and small frame.
8. We will weld the door frame on the front side. The weld is placed on the inside of the structure.
9.
Inside door frame Let's weld the hidden hinges - “dads”.
10.
We hang the door on its hinges.
How to make a cache at home with your own hands
If everything is done correctly, the gap between the door and the frame will be one millimeter around the entire perimeter.
11.
Sand the joints of the metal plates.
12.
We will treat the structure with an anti-corrosion coating.
13.
Let's apply a coat of paint.
14.
Let's insert the lock.
15.
We will attach the gun safe to the wall using anchor bolts.
How to make a gun safe with your own hands is not that difficult. One of the design options that will protect your weapons and ammunition from unauthorized entry.
But since there is a crisis in the country, and not everyone can afford such luxury, there is an option to make a gun safe with your own hands. This video tells you what you can use to make a gun safe very quickly and very cheaply. After determining the dimensions, you should also decide on the material, which is also important when making a gun safe with your own hands.
There are many different models of gun safes available for sale. The difficulty is that some hunters are not satisfied with the dimensions, interior layout safe, while others simply do not have the opportunity to buy it at their place of residence. A safe for a gun is not a luxury (a nuisance in the house), as those who themselves have nothing to do with hunting believe. External constipations (locks) – at least 2. Moreover, on each safe, if the gun and ammunition are stored separately.
The procedure for making a safe
We are talking about high-quality fastening of the safe to surfaces (wall, floor), and at least in 3 points. The reasoning is that it cannot be easily torn off and taken out of the room along with the gun. The fact is that there are many models of safes, including those disguised in pieces of furniture. Comfortable, practical, elegant - no doubt about it. But won’t you then have to redo all this, assembled with your own hands, regretting the lost time and wasted materials?
Reduce total weight You can build a safe using a material other than metal for the shelves. It is advisable to decorate the inside of the safe with something soft. Therefore, it makes no difference whether it is bought in a store or made with your own hands. After all, many hunters are not exactly rich people, and a safe should be purchased exclusively large sizes, therefore the price for it will be equal to the cost of a fairly good domestically assembled gun.
Safe creation process
You can make a gun safe with your own hands in just a couple of days, dedicating a couple of hours of free time to it. It will determine what weapons you can place on this moment and in the future, expanding its arsenal. So it’s best to make a high gun safe with your own hands in advance. For an example of maximum height, let’s take a sample of the domestic Tiger carbine.
We get a height of 1250 millimeters, add another 50 to it for convenience, and we get a safe with a height of 1300 millimeters. The law on weapons clearly states that the thickness metal cladding safe for storing firearms should not be less than 3 millimeters. Additional shelves and drawers inside the safe can be made of various materials, which will be highly durable and reliable.
Making the front door of the safe
After welding the entire main structure, it should be strengthened. To do this, we frame the front part of the safe, where the door will be located in the future, with a metal corner. First you need to weld a metal corner to the side walls of the safe. All this should only be done inside the safe. There should be no external welding elements. Door overhangs should be welded first to the corners on the door, and then to the wall of the safe itself. It is best to use the electric rivet method.
Finally, we paint the gun safe. If desired, you can line the inside with leatherette and stick a rubber seal on the door. You should also draw drawings of a gun safe, thanks to which you can make a part of any design and dimensions. I had paint in the garage, that’s why the safe was a different color, there were different cans of paint. Well, a little bit of desire and effort.
Drawing up a safe diagram
Video about how my friend and I made an iron cabinet or even a safe, in garage conditions. The safe turned out impressive, especially after painting. Well, how convenient it is inside: shelves for optics, knives, etc. I wanted to make a safe at my workplace where I have everything I need. Found a safe at a flea market. Now the problem has arisen with the report from UCH.SM... Tell me, if it’s not difficult, the dimensions of a homemade safe for 2 guns and a compartment for cartridges.
In essence, inside the safe, in addition to the pyramid, it would be nice to have 3-4 shelves - just for cartridges and all sorts of small things. And one more thing: no one is legally required to screw a safe to the wall, but this can also be convenient, just so that it does not fall from an accidental push.
Requirements for a hunter's safe
There will be enough for at least two guns and ammunition: width 400 depth 250 height 1200. The entire height of the partition is 250 for weapons and 150 for cartridges. And buy locks with hinges. In general, this matter seriously engrossed me.
I would never have guessed to hide money this way! 7 Best Home Hidden Secret Ideas...
And about the carpet - that's a thought! I will try. Yes, and the sides will play with your hand. A safe should inspire confidence in its owner.
My safe can only be cut with a cutter; a crowbar will not help. And I agree with the store ones, most are trash. The pistol is lying - the door bends with your fingers and this is a factory safe. But I agree and it will do. Damn, I wished it better, I almost broke my safe while dragging it (so that they wouldn’t take it away gee-gee...) and forced the man. RUS700513-03-2009 13:03 I’m guessing - the safe is 1.5 centimeters thick.
Sailor20-03-2009 12:26TwoS, Stac, you will laugh - but that’s what I did. All that remains is to connect the door to the alarm and I will have my own weapons room. Stepler-20-03-2009 01:36Sailor, like you, I don’t approach this matter on a grand scale, a cabinet of 1200x250x250 mm is enough for me to fit a disassembled gun in a case. As they say, to each his own...
De facto - My hands don’t grow out of shit... Karelskii03/24/2009 12:56 I also had an old safe from 0.7 with one lock, without a lock for cartridges. But when it came to the cutting, it became scary to live with such a safe. I wanted the PA to fit unassembled, so that there was plenty of space. Well, for my requests, the safes were at least 5 thousand and I decided to do everything myself.
67Where were you when I was making my safe?) I thought for a long time about how to fit the hinges inward, but I didn’t think of such an option. Papic02-04-2009 11:10 Guys, they made the hinges in my safe super simple and super cheap - a banal bolt (or self-tapping screw, I didn’t really look) right through, and a plastic washer between the door and the body. But there is great creativity in the very idea of a lying safe under the mattress. Stepler-12-04-2009 17:50 That’s right, it’s not a safe. If they want to steal it, they will rip it out by the roots; sledgehammers and bolts in the wall will not help.
Other elements for creating a safe
Current condition: The safe is welded, the door and internal doors are hung, the locks are adjusted (when I measured the door, the lower one, the larger one, the lock became the upper one), the bolt. Mixb21-04-2009 14:05 I looked at my photos, I’m a lousy welder... Stepler-30-04-2009 23:42 And I started making a safe for the place of work. stay... Stepler-05/20/2009 22:45 Well, the safe is ready. Minimum dimensions... If I decide to remove the screws from the floor, call a neighbor to help, take the safe out into the street, polish it, then it will be very cool...
6746, my friend and teacher has a safe for CO, also made of a pipe with a diameter of 200-250 mm. On top is a key with a tricky twist, and that’s the whole lock. From the outside it looks cool, but reliable. Mityan15-06-2009 16:57 I made my own safe and installed a normal lock.
Sailor: Well, yes, that’s exactly what I tried to do under the bed, it’s a temporary safe... The idea is to make yourself a gun box 2 by 2 m and 30 centimeters deep, and then place the guns horizontally on top of each other.
196207-03-2010 12:38 I would like to advise craftsmen who make safes for storing weapons to take into account when arranging holders for weapons that it is better to store weapons with their barrels down.
22 Simple Secret Secret Ideas That Are Better Than Any Safe
DIY fireproof safe
- 1. DIY fireproof safe
- 2. How to make a safe with your own hands?
To understand how to make a safe with your own hands, you need to general outline navigate the designs of safes, what materials they are made of and much more.
Factory safes are made of high-strength steel. In a fireproof safe, for example, fireproof concrete is poured between the walls. That is, as you can see, making a safe is a complex process, both from a technical point of view and in terms of doing it yourself.
Nevertheless, simple design You can make a reliable safe yourself. Fortunately, today in the markets you can purchase both high-quality steel and a reliable mechanical combination lock or electromechanical product.
We talked about how to choose a safe for your home earlier, but today the article will be about how to make a fireproof safe with your own hands, and about recommendations for this difficult process.
DIY fireproof safe
To make a fireproof safe with your own hands, you will need to use metal sheets of at least two centimeters. A fireproof safe must have double walls. An asbestos sheet, which is located between two metal sheets, is quite suitable as a substitute for refractory concrete.
It is recommended to make the doors of a homemade fireproof safe somewhat larger in thickness than the walls of the safe, at least 5 centimeters. On lathe It is necessary to make a recess in advance to install a mechanical or electromechanical combination lock.
It is better to make a fireproof safe with your own hands built into the wall, that is decorative cladding in this case, the outer wall is not needed. It will be necessary to decorate only the front part of the homemade safe and its doors.
How to make a safe with your own hands?
The question of how to make a safe with your own hands is not an easy one. It’s best to start with careful planning, both the size of the future product and its design features. In this case, you should take into account:
1. What will need to be stored in the safe after its manufacture, since the dimensions of the safe you make yourself depend on this.
So, for example, if important documents of A-4 format will be stored in a fireproof safe, then it is recommended to make a fireproof safe of such a size that the documents do not have to be folded in half during storage.
2. Metal for a homemade safe can be used with a thickness much smaller than 5 mm.
How to make a small home safe? How to disguise, options?
It is clear that working with thick metal using ordinary metal workbench very hard.
Therefore, for a homemade fireproof safe, you can choose metal 2-3 millimeters thick.
3. It is necessary to connect the walls of the safe only by welding, no bolts, etc. Of course, if you are making a fire-resistant safe, then it is better not to be lazy and make double walls in it, between which sheets of asbestos board will be located.
An asbestos board will help contain the heating of the walls of a homemade fireproof safe for some time.
Even if you don’t have a lot of valuables in your home, you’re still unlikely to want to lose them. Not to mention some pretty impressive savings! Since the reality around us is becoming more bleak every day, and the number of burglaries has increased several times, it is worth thinking about how to make a hiding place at home. As they say, God protects what is taken care of, so it is still better to keep the most valuable things away from prying eyes.
Basic rules for storing valuables
Before we talk about where and how to make a cache, remember a few simple rules, which will help you keep what you have acquired and all your secrets:
- do not put all the “mushrooms” in one basket; if your hiding place is discovered, even worse than hope, you will lose everything at once;
- when arranging the cache, be as creative as possible;
- make a hiding place within a hiding place - if one is found, the second one will most likely remain untouched;
- avoid obvious storage; if you have heard about such a “snatch” at least three times, then this is no longer a reliable place;
- hide at home only what you are willing to risk;
- come up with an exculpatory story in case you discover what you have hidden (if you are hiding it from your family);
- If you don't want something to be found, don't hide it - put it in a visible place.
This is definitely not a hiding place
There are a lot of obvious places that have been widely known for a long time. The burglars examine them first. If you are wondering how to make a hiding place, make sure that your hiding place is not one of the ones listed below.
- Drawers of tables, chests of drawers, furniture walls, pianos, secretaries and the like. This is too obvious; even a child can easily discover such a stash.
- Among linen, both clean and dirty. You shouldn’t hope that a thief will disdain to turn over a basket of bad-smelling socks.
- In pockets and behind the lining of an old coat or jacket. Values there are also easy to find.
- In old and new videotapes, magazines and books. An upside down library is a classic attribute of every heist.
- Under the mattress or inside. It's funny, but many people (and not only older people) continue to keep their savings there.
- Behind mirrors, wall and floor carpets and behind paintings. Believe me, it will take you much more time to secure the “shovanka” there than it will take a thief to discover it.
- IN cistern toilet. This is another classic example of a hiding place. Rest assured, the thief will definitely look there.
- IN freezer, oven, jars of cereal, sugar or jam. You can find valuables there with one movement of your hand.
- Mezzanine. For some reason people think that this perfect place for storing stash. There's so much trash there. The problem is that a thief will not carefully go through the contents of the mezzanines. He will simply dump everything at once and very quickly find what is hidden.
- Video, audio equipment, other Appliances. If the item is worthwhile, there is a risk that it will be taken away along with the cache, and if it is old, the thief will have a question as to why the junk has not been thrown away yet.
- Under parquet or behind wallpaper. If the thief is in a hurry, it may work, but if they start tapping on the walls, then...
Hide the flat and important
So how to make a hiding place for money (bills) or for something thin, such as a folder with documents? For this purpose, niches and hiding places in furniture are most often used. Double bottoms for drawers and the bottoms of heavy cabinets are what you need. Of course, to get it required document, you will have to empty the closet of all your belongings and turn it upside down, but the thief definitely won’t have time for this.
By the way, as a double cavity it is best to equip not a double bottom, but double ceiling- such a cache is more difficult to detect.
If the document consists of only a few pieces of paper, you can roll it into a tube and put it, for example, inside a curtain rod or in the handle of a floor mop.
Hiding small and valuable things
How to make a home cache if you need to hide something large, such as gold, stones, coins, a flash drive with information or a roll of money?
The most popular (and therefore most unreliable) is the hiding place in the door. This is the same option when at the top end door leaf a cavity is drilled into which a metal tube, for example from a cigar, is inserted. Small items fit inside easily. You can remove the cache using a simple magnet. It’s impossible to notice it while looking at the door, but you just have to move your hand from above - and voila...
Another popular hiding place is most often equipped in an outlet. The point is that there are many sockets installed around the perimeter of the apartment, all of them identical in appearance. One of them is fake. To find it, just pull off the caps on all of them. If you do not use a screwdriver, but simply break them, your mini-safe will be discovered very quickly.
To reliably hide small items, disguise them as everyday items and place them in plain sight. A can of cola, a ballpoint pen with a hundred dollar bill instead of paste, a box of paper clips with a double bottom - these are just seeds for your imagination.
I don't trust anyone, it's better to do it yourself
Today, various websites, especially Chinese ones, offer countless trinkets that have secret cavities for stashes. If you want to hide something from your family, this might work. But if you are afraid of a thief, this option will not work. If you have seen a cute little thing, then burglars are probably also familiar with it. You can be sure that they are also interested in “new products” in their field of activity.
In this case, you have no choice but to make a cache with your own hands. This is the only way you can be sure that such a cache exists only in a single copy. If you know how to make any crafts, this can be a serious help - you can make a hiding place in one of the souvenirs. If God deprived you of talents, you will have to strain your imagination.
Children hide from their parents
Many members of the younger generation, especially smokers, are interested in the question: how to make a hiding place at home from their parents. The advice here can be simple: if you learn to smoke, learn not to hide. But these are lyrics. In fact, there can be a lot of hiding places. Try to do them in places where parents prefer not to look. Young people make classic hiding places in system unit computer, CD boxes, soft toys and so on.
By the way, if you have small children at home and scattered toys are a common thing, you can arrange a hiding place in one of them. The main thing is to choose one that the child is already tired of, and he no longer plays with it. Such a hiding place will not look suspicious, and a thief is unlikely to take apart all the cars and cubes.
The most unusual hiding places
First of all, think about how to make the hiding place secure, find a place where the thief will not even think about rummaging. Here are a couple of examples:
- in old shoes - one or two large bills can be tucked under the insole of worn shoes and placed along with all the shoes; the main thing is that the shoes do not look like outright junk - this may arouse suspicion; It is also important not to forget that money is hidden in shoes or sneakers, otherwise you may accidentally throw away your own stash;
- in a woman's pad - here the fact of disgust comes into play; most often, a man, on pain of death, will not touch feminine hygiene products; Moreover, it would not occur to him to gut every gasket he found; if you hide the money inside one of them and carefully seal it again, then most likely your stash will remain untouched; again, it would be good not to forget that there is something there;
- in a tube of toothpaste, a bottle of shampoo, a bottle of deodorant; almost any case can be equipped with a double bottom and it will be no different from its own kind; the main thing is to place them where they will not look ridiculous; for example, a bottle of shower gel will look weird on a dresser or bar.
Stash "with strawberries"
As already mentioned, when organizing a hiding place, you can play on human disgust or try to confuse the seeker. Figure out how to make a hiding place in one of your intimate toys - and the valuables will most likely remain intact. Even if you don't use such things in your sex life, buy a couple and put it where “it” is usually hidden: in a nightstand near the bed or a secluded place in the bedroom.
If a thief finds any “device” with a sexual slant in your home, he will most likely disdain to touch it, much less examine it carefully. The weirder the sex toy looks, the better.
This method is most likely not suitable for those who have small children, otherwise “curious people” will have to somehow explain what it is.
Conclusion
If you still don’t know how to make a hiding place at home, and simply have no idea where you can hide this or that item, play hide and seek with your children. The peculiarity is that you do not need to hide yourself, but place it in secluded places small objects and look for them according to the “hot - cold” principle. Children are famous inventors. You can't imagine how many great hiding places you can find in places you never thought possible.
And one more thing: if you want to safely hide your valuables, do not use any of the methods listed in this article. Since you read about them, thieves might also know about them. Come up with something of your own, original - and your savings will remain with you.
It is within the power of every person to protect their home and property from thieves as much as possible. To do this, there is no need to go out and buy the most expensive safe. Reliable hiding places, the presence of which is not so easy to guess, you can do it yourself.
Some hiding places are useful not only to protect things from thieves - many of them can store bills, documents or new Year gifts for children. Most cache-making tools are easy to purchase at your local hardware store.
You can create a hiding place for money right in a regular interior door. It is also convenient to store jewelry or flash drives with important documents. To do this, you just need to drill a hole in the top and place a metal or plastic tube with a screw-on cap there.
Large paintings or posters often hide caches of valuables. Therefore, it is better to choose a less trivial place for the safe, and place a niche for cables and behind the work of art.
But a large picture is perfect for storing jewelry. You just need to place a vertical hanger behind it for beads, chains and earrings.
Regular wall shelf can be equipped with a hinged lid, under which you can store anything you like.
The mirror can be equipped with pull-out shelves on the sides, the existence of which is not easy to guess.
Many have seen in movies how people create hiding places in old books by simply cutting out a niche in the pages. Anyone can repeat this using an ordinary breadboard knife or scalpel.
There are hollow computer keyboards on sale that allow you to store small items inside. Of course, this will not protect you from loss if a burglar decides to steal your computer, but it will help keep your desktop in order and hide some things from children.
Nowadays, imitation sockets are popular - small safes that are installed in the wall and opened with a key. They are very convenient for storing money and jewelry.
Good day. Today I decided to touch upon very interesting topic. Namely, connected with the fact that sometimes we have to hide something somewhere from prying eyes for some reason. In this article, the author will describe one of the examples of how to make your own hiding place, cache, mini-safe, “little hole”.
So. What is the word cache for us?! This is the treasured place where we can hide something, valuable or not, from the omnipresent secretive eyes.
Perhaps the most the best way to hide your secrets and secrets is to make a secret place yourself. It may seem very difficult for someone to find that very place, but just look around you and we can easily see dozens of such places that are suitable for this. But in this article I will describe only one example of the variety of such methods. This place will be the most common item for us - a socket! Which safely surrounds you and me literally everywhere: at home, at work, at the dacha, etc. and that’s probably why the choice fell on her, since from early childhood we are all taught - “don’t put your hands in the socket!!!” and thieves will most likely be no exception, and our secret will remain a secret.
Let's begin. All we need is
Tool:
1 - pliers;
2 - screwdrivers of different types;
3 - hacksaw;
4 - construction pencil or regular pencil;
Inventory:
1 - socket box;
2 - double socket;
3 - self-tapping screws for fastening the structure.
First. Let's determine the very place where the secret safe-cache will be located. In the case of the author of the article, this place turned out to be a wall made of plasterboard, which made his task a little easier. Since it is easiest to make a hole, recess, and so on in a wall from this material.
Second. First, let's take the box and disassemble it into its components. Since it was originally assembled.
AND the final stage There will be installation of the structure.
To do this, we take the box and mount it into the wall, while fixing it with several self-tapping screws.
That's all. If necessary, unwind and take out what you need.
Pros and cons of this work.
Pros:
1 - the possibility of penetration into such a cache is minimal. Therefore, you can store really valuable things here.
Minuses:
1 - small cache capacity;
2 - the ability to use the outlet as an electrical power source. network is excluded.
And now I would like to add some tips.
1. It is necessary to take into account the special property of the item that you want to hide. It may be sensitivity to environment, temperature and so on. For example, you cannot hide undeveloped film, as well as some chemicals, in a hiding place that is made directly near a heat source. And if the item absorbs moisture, then you need to place it in an airtight package.
2. Before you build such a hiding place for yourself, you need to understand a few rules. It is best to make a hiding place yourself and not tell anyone about it. There is no need to make a very common mistake such as telling someone about the presence of this cache. Because some are proud of it, show it to friends and acquaintances. This can lead to great complications and problems. Therefore, if you have already decided to start a cache, keep quiet and save yourself and others from unnecessary problems!
Thank you all for your attention!
And let the secret remain secret!
Useful tips
Hidden safe for the most cunning
1) These original Wall Clock They are no different from ordinary ones, except for one detail - secret compartment with shelves. There you can hide everything that you are so afraid of losing. However, if thieves covet the watch, your cache will disappear along with your jewelry and money.
2) Socket . This device for hiding “things acquired through back-breaking labor” is much more reliable than a watch. We were all taught from childhood - don't put your hands in the socket, so thieves are probably no exception. It is difficult to guess that there is a hidden hiding place in the socket.
3) Chips boxes or from any other food product. Thieves are unlikely to go looking for your savings in the kitchen. However, if they have enough time, they can climb there too. You can make this “safe” yourself, just buy and eat a pack of chips. However, if there is too much money, it is unlikely that they will all fit in this device. We also advise you not to leave it in very visible places where it can be conspicuous and someone will definitely look into it.
Any tin can will also work perfectly for this purpose, however, care should be taken to ensure that it is properly sealed and place somewhere between other regular jars.
4) Comb with a twist-off cap. If your round comb-brush is quite large in diameter, it can fit a decent-sized bundle of money.
5) Dress on a hanger. It looks like a simple dress, but the secret pockets hide a lot of valuables. The main thing is not to keep it somewhere in a closet close to mink coats, as thieves may accidentally take your wealth along with them.
Original hiding place in the house:
6) Original solution – money in cabbage ! This cabbage is actually not really cabbage, but an original hiding place that will quietly hide your savings, lying in the refrigerator, without arousing the slightest suspicion.
7) Coca Cola or Red Bull can . Unless a thief gets thirsty during a robbery, he might not notice the unopened can of Coca-Cola that looks no different from the rest in your refrigerator.
8) Candles . If you make a hole inside a thick candle, you can put any small things in it. Including money and jewelry.
9) Stash of bread . Perhaps this hiding place can be called the most successful, since most likely thieves will not pay attention to it. Designed to look like a real loaf of bread, this clever device includes a hidden hole where you can deposit your savings.