Organizer- an indispensable thing in the house for storing not only every little thing, but also some valuable things. Such a convenient and necessary thing can be purchased at any supermarket. Or you can use your imagination and do it yourself. And we will help you create an organizer for any occasion.
The main thing in the article
How to make an organizer with your own hands?
- Making a box for storing all sorts of things is not difficult even for a beginner. You will need material, stationery and some time.
- Organizer materials are usually created from , from things that are thrown away or, in rare cases, the necessary components are purchased.
Small organizer for hairpins and elastic bands with your own hands for beginners
Surely, more than one girl has experienced the mess in her hair accessories. There seem to be a lot of them, but they are not always in place. So, in order to put the elastic bands and hairpins in decent order, you need to put them in one place. The place should be beautiful and comfortable.
You will need:
- Frame;
- ribbons;
- hooks;
- glue;
- scissors;
- ruler;
Progress:
- Measure the photo frame and cut the ribbons according to size. Glue on the back side with a gap of 3 cm.
- Then measure a sheet of cardboard and cut it to fit the photo frame, glue it over the ribbons on the back of the frame.
- Glue the hooks to the outside of the frame, placing them as you wish.
- Now you can hang the photo frame on the wall or place it on the table.
DIY stationery organizer
To find a pen, some people need to search the entire house and turn everything upside down. But if you have a stationery organizer, you won't have to go far to find pencils and pens.
You will need:
- pencil;
- tourniquet;
- 6 cans;
- paper;
- scissors;
- glue;
- spray paint;
- ruler.
Progress:
- Coat the jars with glue and cover them with paper.
- Make a handle as in the photo and wrap it with a tourniquet.
- Then paint the jars and set them to dry.
- Arrange the jars in pairs, insert a handle in the middle, and wrap everything with a tourniquet.
DIY underwear organizer: step-by-step instructions with photo examples
The creators of furniture for things did not think about how they would be stored there. And in most cases, underwear suffers. Few people always fold their laundry neatly. Therefore, you can use a little trick and add a linen divider to your closet.
You need:
- shoe box;
- glue;
- scissors;
- ruler;
- stationery knife;
- pencil;
- paper for design.
Progress:
DIY cosmetics organizer
Don't have time to buy a decent cosmetic bag for your beauty arsenal? Or do you have so much of it that your travel bag is bursting? Then a magnetic board for cosmetics will help you.
You need:
- large photo frame;
- magnetic sheet according to the size of the photo frame;
- small magnets for each beauty item;
- paper for registration;
- glue;
- scissors;
- ruler.
Progress:
- Measure the inside perimeter of the frame and cut the magnetic sheet along it.
- Do the same with the design sheet.
- Place a decorative sheet in the frame, then a magnet, and cover everything with the frame lid.
- Place magnets on all makeup items.
- Hang on comfortable spot.
- The organizer is ready, now you won’t lose anything and everything will always be in one place.
How to make a convenient jewelry organizer?
There is never too much jewelry, you just need to find a spacious storage for them. Various boxes take up a lot of space, and besides, the jewelry in them sometimes gets confused. Therefore we offer you Alternative option for storing jewelry.
You will need:
- frame;
- metal grid;
- pliers;
- spray paint;
- furniture stapler and staples for it;
- hooks
Master Class:
- Place the mesh on the back of the frame and secure with a stapler. Trim off any excess tails with pliers.
- Turn the frame over and paint it, wait until it dries.
- Hang hooks and you can hang decorations on them. By the way, some decorations may not require hooks.
Large shoe storage organizer
Storing shoes in boxes is not always convenient, and often it takes up a lot of space. So why not make one big shoe organizer?
You will need:
- plywood;
- electric jigsaw;
- roulette;
- pencil;
- wood glue;
- the beams are thin;
- self-tapping screws;
- sandpaper;
- iron rod;
- iron mechanisms for scrolling;
- dye;
- drill.
Progress:
- Cut circles from sheets of plywood; select the number of circles according to the number of pairs of shoes.
- Sand the edges with sandpaper.
- Cut out partitions from the beams for each section of the cabinet. Calculate that you need 6 pieces for one.
- Make a hole in the center so that the cabinet rotates.
- Assemble the cabinet: circle of plywood + crossbars + circle of plywood + iron mechanism and so on, repeating the steps.
- Thread a rod through all sections.
- Build a stand for the organizer and place the box on it.
- Paint the organizer, wait for it to dry, and place your shoes inside.
Headphone organizer
Often, headphones lie around and get tangled. This is very unpleasant and takes quite a long time to unravel. Therefore, we have prepared an interesting life hack for you so that your headphones are always in order.
Prepare:
- funny pictures 2 pcs;
- paper;
- glue;
- scissors;
- double sided tape.
Procedure:
- Cut out the pictures.
- Prepare a piece of paper measuring 5x10.
- Fold the piece of paper in half and glue a picture on each side.
- WITH inside Secure at the top with double-sided tape.
- Now you can wrap your headphones around without worrying about them getting tangled.
- You can replace the paper with felt, and use buttons as a fastener.
DIY organizer for small items: ideas with photos
To organize little things in one place, just create interesting place for storing it. Then she will always be at hand. And creative boxing will fit perfectly into your .
DIY desktop organizer folder for papers and documents
Papers, like other work supplies, must be visible and in order. And so that they are always at hand and look good, build a storage folder yourself.
Required tools:
- colored paper;
- beer cardboard 2 pcs;
- glue;
- scissors;
- ruler;
- decorative paper.
Master Class:
- Cover the beer cardboard with paper for decoration.
- Cut the sheets of paper 1cm smaller on each side than the beer cardboard.
- Using 2 long pieces of paper, make an accordion out of them. Bend 1 cm at a time, and glue sheets after each span.
- Cut the paper for the crust and connect the cardboards as in the picture in step 4.
- Glue the accordion with sheets. Your folder is ready, fold the papers.
DIY organizer for handicrafts
Craftswomen have a lot of little things that need to be stored somewhere. We suggest you make a box for small items.
You need:
- thick cardboard;
- glue;
- scissors;
- pencil.
Progress:
- Draw on a piece of paper future box V folding form. Draw a handle on top for convenience. On the second sheet, make a drawing of exactly the same box.
- Cut out the drawing, bend along the fold lines and glue.
- Place them back to back and glue them.
- Design the box the way you like and use it.
Try the option for storing ribbons and ribbons for this box you will need:
- shoe box;
- eyelets;
- paper for registration;
- scissors;
- glue;
- pencil;
- ruler.
Progress:
- Cover the lid and box with paper for decoration.
- Using a ruler and pencil, mark the points for future holes.
- Attach the grommets.
- Place the ribbons inside and thread them through the holes.
DIY crib organizer
For young mothers, we have prepared a convenient organizer that can be hung on the crib. You can put the most necessary things for your baby in it.
You need:
- textile;
- scissors;
- ruler;
- threads;
- sewing machine;
- binding;
- buttons or snaps.
Master Class:
- Decide on the dimensions and cut the fabric according to them.
- To seal the organizer, cut out exactly the same piece of fabric for the base, stuff your future organizer with a thin layer of padding polyester and sew it together.
- Make pockets of different sizes.
- Make handles for fastening.
- Sew trim around the edge, attach pockets and handles.
- Make a fastening from buttons or snaps.
- Your organizer is ready, use it to your health.
DIY kitchen organizer
The kitchen for every housewife is hers personal account, a place where masterpieces are created. Therefore, so that all the tools for creating unique things are focused in one place, we have prepared two versions of the organizer.
For the first option you need:
- adhesive wallpaper in 2 colors;
- cans of chips (Pringles);
- scissors;
- tape measure.
Progress:
- Measure the diameter and length of the can and transfer the data to the wallpaper.
- Cut out the required size and cover the jar.
- Draw a sign of the utensils that will be stored in the box on the wallpaper in a different color.
- Cut out the sign and glue it to the jar.
- Place the organizer in a convenient place. Such storages can be made for each group of items.
The second version of the organizer is adapted for interesting storage cups. For him you need:
- small boards;
- thick tourniquet;
- hooks;
- screws;
- screwdriver;
- staples;
- ruler;
Master Class:
- Connect all the boards with staples using a screwdriver.
- Make a fastening on the reverse side and tie a tourniquet.
- Screw on the hooks.
- Use chalk to write funny messages to decorate the board.
- Hang the organizer on the wall and hang cups.
DIY car seat back organizer
Some families need organizers for their car, especially those with small children. We have prepared a master class on making a hanging box just for such families.
You will need:
- textile;
- scissors;
- sewing machine;
- threads;
- Velcro;
- binding;
- straps;
- decorative elements.
Progress:
- Measure the seat of the front seat and transfer it to the fabric on the inside.
- Draw the pockets. Then cut out all the components.
- Sew the binding along the edge of the main fabric and onto the pockets on top.
- Sew pockets and straps for fastening.
- Add decorative elements.
- Now your child will not be bored, and things will always be in one place.
DIY car trunk organizer
Sometimes everything in the trunk is upside down. And it takes a lot of time to put things in order. But there is an alternative - make a wardrobe for things in the trunk of your car yourself.
You will need:
- soft fabric;
- plywood sheets;
- self-tapping screw;
- screws;
- screwdriver;
- pencil;
- roulette;
- glue/splitter with staples.
Progress:
- Measure the dimensions of the trunk and transfer them to a sheet of plywood to make the bottom. Then make the same lid.
- Saw the partitions according to the required height.
- Insert one at a time and secure with a screwdriver.
- Cover the lid with fabric, preferably similar to the one in the car interior.
- Secure it with a stapler or glue.
- Place an organizer in the trunk and put things away.
How to make a hanging bath organizer with your own hands?
An interesting organizer for the bathroom can be made from jars for storing cereals. To create such a thing you will need:
- board;
- jars for storing cereals;
- screws;
- screwdriver;
- round iron fastenings;
- ruler;
- pencil.
Work process:
DIY organizer made of cardboard with photo examples
Cardboard is a fairly dense material, so it is great for creating storage boxes. Moreover, the budget version of the organizer is suitable even for a beginner.
DIY organizer from boxes: step-by-step master class
There are boxes in every person's home. Only some people get rid of them as unnecessary trash, while others carefully keep them for a creative impulse. If you have accumulated a sufficient number of boxes of approximately the same size, then you can build a mini chest of drawers for storing small items. You will need:
- boxes 5 pcs, one high and 4 low;
- ribbons;
- paper for registration;
- glue;
- scissors;
- pencil;
- ruler.
Work process:
- Make three inner boxes of the same size so that they fit into one larger one.
- Place the fourth box up and glue it.
- Cover the boxes with paper and make handles for the drawers.
- Insert the drawers and your dresser organizer is ready.
Sew an organizer with your own hands from fabric: patterns and photo ideas
The organizer can be made not only from scrap materials, but also sewn from any fabric. This could be an old towel, jeans, tablecloth, or new fabric purchased.
DIY jeans organizer
Are your old jeans worn out? But this is not a reason to get rid of them forever. Give them a second life and they will pleasantly surprise you. You will need:
- jeans, several pairs;
- sewing machine;
- threads;
- measuring tape;
- scissors;
- pen.
Master Class:
- Open the pockets on all jeans;
- Cut the pant leg on one side and then mark a rectangle;
- Cut out a rectangular piece and sew pockets on it.
- Make a hanging handle from the remaining material.
Video: DIY organizers - little tricks
Making a box to store your favorite things is very simple, just use your imagination. And our magazine will help you with photo ideas and job descriptions. Store your stuff in cool designer pieces that you made with love.
Dear readers, such waste material can be found in every home, so look at the photo master class on how to make a homemade organizer from empty packaging and bobbins from toilet paper and paper kitchen towels. We attach a bottom to the lower ends of the bobbins and connect all the blanks together to make convenient design organizer All that remains is to cover everything beautifully with paper or fabric, or you can paint it to give the blank a beautiful finished look that matches the style of your interior :)
Look at this photo master class. from which you can clearly see how to make this convenient organizer with your own hands.
Look how talented craftswomen designed their works in an original way :)
Dear readers, summer often brings us sultry heat, which not everyone can tolerate well, especially heart patients and elderly people, therefore, I advise you to install an air conditioner in your home. thanks to which at any time you can regulate the temperature in the room and provide yourself with comfort and fresh air! Contact the Kyiv company Techhome by looking at their website techhome.kiev.ua to leave a request for their provision professional services on installation and competent advice on choosing the right air conditioner for you with detailed qualified advice on how. Thanks to the correct purchase of an air conditioner, you will provide yourself with comfort for many years :)
Successful DIY crafts to you :) Best regards. Marina.
Have you already bought notebooks and pens for your little schoolchild? If not, hurry up. The first of September is just around the corner.
You need to know, and at the same time save time and money. And when you already have everything you need, you need to understand what to do so that all the pencils, pens, and felt-tip pens are not lying around somewhere, but are in their place and are always at hand. The basis of order on the desktop is an organizer. But only the kind that the child would like and would like to use.
It's better to do it yourself. Why? The first and most main reason- it's fun. Your child will love to come up with a design and make their own organizer. And you too. The second reason is its special value. A student will certainly use a homemade organizer more readily than a purchased one. And the third, but optional reason is savings.
Here are some ideas:
From cardboard
The easiest way to make an organizer is with cardboard boxes. And the material can always be found - there is plenty of it in any kitchen. And there is little hassle - just cut out the opening and cover the structure with beautiful paper. At worst, you can paint with markers.
And toilet paper rolls can be used to store pens.
If you have a little artist growing up, and there is nowhere to put his hundred pencils, make an organizer from a shoe box and toilet paper rolls.
You can use cardboard to make containers for small items in a desk drawer.
You can cut the box into cardboard sheets, glue or sew them, and then cut out the boxes. And the organizer is ready!
They look stylish and wall organizers. Make triangles out of cardboard using the origami technique and hang them above the table. We have already written about that.
From fabric
If you know the basics of sewing, you can create a beautiful organizer from scraps of fabric.
If you don't know, then make it from old jeans. Cut out pockets and sew or glue them to the fabric.
Framed fabric organizers look very nice.
From cans
A decorated jar, whether glass or tin, is itself stylish decoration rooms.
Made of wood
To make such an organizer you will need a wooden block or blocks. Drill holes in them. Now you can put pencils and pens there.
From book
We are like old Soviet books like “The Party is Calling!” Suitable not only for lighting a fire at a picnic. They can decorate your home. You can also use them to make a box for various paper clips, rubber bands and other small items. You just need to carefully cut a hole in them.
From pencils
There certainly won't be anyone like this original organizer. And it's very simple to do. You need a set of pencils and a jar. It will do plastic bottle with the neck cut off. In general, the container needs to be covered with pencils.
Organizers are not only beautiful decorative element, which beneficially complements the interior, but is also quite a practical thing that allows you to competently organize the space in any room.
The stores offer a wide range of different organizers that will be appropriate in any interior, but it is more convenient to make one yourself. This makes it possible not only to save money, but also to make the most suitable option for personal needs.
The main thing is to know how to make an organizer with your own hands and follow all the advice of experts.
Jewelry organizer
Costume jewelry requires a special place for storage, since small parts are quickly lost if handled incorrectly. At the same time, jewelry should be visible to simplify the process of getting ready for the fair sex. Organizers in the form of photo frames or paintings are suitable for storing jewelry.
Basic materials from which you can make an organizer in a home workshop:
- Frame for a photograph or painting;
- Water-soluble paint;
- Varnish for coating;
- Simple pencil;
- Glue;
- Lace fabric or Nice picture for background;
- A piece of rope (tape);
- Ruler;
- Stapler;
- Self-tapping screw.
Stages of work
A ready-made frame can be purchased at an art store or hardware supermarket, but it must be uncoated in order to be able to paint the product in the desired color.
The painting process is carried out first, for which two layers of paint are applied with short breaks (about 1 hour) so that the first layer has time to dry well. A layer of varnish must be applied to the dried paint.
Do not forget that after each stage it is advisable to clean the brush of paint, especially before applying varnish.
A cut is inserted into the frame beautiful fabric, lace or a regular picture that will become the background for the future organizer.
The decorations will be held on by ropes (ribbons) or self-tapping screws. Sections of rope along the length of the frame are located along the product and secured either with a stapler or glue.
You can hammer in 2 small nails on each side and simply pull the rope over them. Large nails, metal hooks and baskets can serve as jewelry holders.
At the last stage, you need to secure the loop with a self-tapping screw in order to hang the picture on the wall. The jewelry organizer is ready!
Making an organizer for wires and office supplies
In addition to decorations, organizers are convenient for storing various little things that can be found in every home. Photo homemade organizer for little things you can find it on the Internet and use it as an example.
It’s easy to make such a product, but you will need the following materials:
- Thick cardboard (can be used from an unnecessary box);
- Glue and double-sided tape;
- Paints or paper for scrapbooking;
- Pencil;
- Ruler;
- Scissors;
- Stapler;
- Stationery knife;
- Textile.
Work on creating an organizer
To begin with, the dimensions of the future organizer are determined. It will consist of several parts, which are arranged depending on personal needs in any convenient way.
5 parts are cut out of cardboard: rectangular for the bottom and 4 as walls. The large part is easily replaced by 2 small ones, which are glued together in the middle.
The main thing is that the structure is firmly secured with tape.
The walls of the organizer are glued to the base with ordinary tape with opposite sides. To do this, the wall is placed on the edge of the base, and the tape captures two parts at once. After this, the other two sides are glued, and the edges between all the walls are secured with tape. If necessary, you need to cut off some of the cardboard at the joints to make it easier to form a “box”.
At the fourth stage, you need to measure the box from both the outer and inner parts, and then transfer the measurements to fabric or scrapbooking paper. Recommended to use different shades for decoration to make the product look more stylish and interesting.
Before gluing the fabric, it must be carefully ironed to facilitate the next stage of work.
In the upper inner part, the fabric is secured with a stapler, and the edge at the bottom with glue. After this, double-sided tape is half-glued to the upper inner edge, which is folded to the outer side. It should be on both sides of the edge.
Fabric parts for outside The boxes are placed on the tape that was glued earlier, on the inside along the entire perimeter of the product.
Double-sided tape is glued to the bottom along the entire perimeter of the box, after which fabric is stretched over it to finish the outside. This must be done so that there are no folds or unsightly creases left on the fabric.
The bottom is covered with fabric, after which marks are made to bend it to the size of the box. The excess needs to be folded inward, where the pieces of double-sided tape are placed.
Thus, the bottom of the box is filled and the product takes on its final form. Any errors are glued with glue.
Sometimes a box is filled with such small parts that large compartments are not suitable for storage. Partitions come to the rescue, which are installed inside, dividing the space into many small cells.
The partitions are made of cardboard, pasted over in the color you like, each of which has cutouts on one side. The cell size depends on the number of cutouts on one partition. After preparatory work they simply slide into each other, creating separate “drawers” for small components.
This way, either one box or several are made, but at the same time they are connected with double-sided tape or a stapler into a single product. Organizer sections can be different sizes depending on the imagination of the master.
Using a similar principle, you can make your own organizer at home from cardboard tubes. Suitable materials include tubes from hardware stores or a cling film base. large sizes, from which several segments are made. They are pasted over with fabric or paper, the edges are sanded with sandpaper, fastened together with glue or glued to a chipboard stand that acts as a base.
Photos of DIY organizers
There are a lot of amazing things around us, at the first glance of which no delight arises. And only upon closer examination does one realize that before one’s eyes is a masterpiece! One of such masterfully executed works is a DIY cardboard organizer.
Here are some examples of how a recycled product can be turned into a functional, useful and beautiful product:
These things are not only beautiful and exclusive, but also bring comfort, order and individual flavor to the house.
Having set the task of doing something similar in the home, everyone wonders where to get required amount source material. After all, cardboard for children's creativity is not suitable for these purposes. Flexible thin material is produced for schoolchildren. There is not much of it in sets, and besides, it is limited in size and will not work for large products. The way out of the situation is to go to the nearest store, or rather, to the warehouse of the nearest store. There you can always find an abundance of empty packaging containers for fruits, groceries and similar goods. Also, thick boxes made from large household appliances are suitable for crafts of this kind.
Once the basis for the future product has been found, we begin work. Let's look at a few ideas for creating various types cardboard storage facilities.
For cosmetics
The simplest type of craft that even beginners can do is presented below.
To work you will need:
- Cardboard box;
- Decorative paper for decoration;
- Glue;
- Stationery knife;
- A simple pencil.
The basis of the organizer will be the box. For these purposes, it is better to choose packaging without a removable lid. The best option there will be an empty container from a laptop or tablet.
We cover the box with paper and decorate it to your taste. Let it dry well. Next, use a stationery knife to cut holes that fit the size of the existing cosmetics. The stand for cosmetics is ready. It is convenient because it can be placed on any table or bedside table.
Let's consider another version of such an organizer.
This product has a more complex and impressive design and is made in the form of a small chest of drawers. But thanks to the pattern presented below, it won’t be difficult to make it special labor. The dimensions for the chest of drawers are shown in the image.
The video tutorial explains how to cut and assemble all the parts correctly:
A product with a masculine character
Not only women love order in everything. Most men are zealous about their belongings and cannot stand it when they are moved to other places. This is understandable: clarity and accuracy are the two main features successful people. Therefore, any representative of the stronger sex will love a cardboard organizer for office supplies.
A master class on making this masterpiece will help you easily cope with the work and get brilliant result at the exit.
The entire structure is collapsible and consists of individual elements. They are covered with kraft paper and vintage decorative paper.
The books in this organizer are removable. It's more convenient option during operation.
Decorating materials can be purchased at specialized stores that sell scrapbooking products.
Let's move on to the manufacturing process. Let's make books first. To do this, we will transfer the diagram with the dimensions of future folders onto cardboard and cut it out.
After this, we assemble a book from the covers, gluing the flyleaf to it.
We strengthen the spines of the books for rigidity.
Let it dry thoroughly and begin making the closed side panel.
The result was separate blanks for the covers and ends of the books. Let's put them together.
We paste each separate element decorative paper. This type of paper with an aging effect is easy to make yourself, rather than buying it in a store. To do this, soak ordinary office sheets in tea leaves or infusion of onion peels and dry them. After pasting, we assemble the structure.
Finally, we make a retractable drawer. We also paste it over and decorate it with paper.
We assemble all the parts into the finished product.
The nuances of making such an organizer can be found in detailed video tutorial, which will provide answers to your questions.
Real men will highly appreciate the effort spent on making such a useful desktop accessory.
Video on the topic of the article
You can make not only an organizer from cardboard, but also many other useful things. You can find even more ideas on using this material in creativity in the videos below.