During winter operation of the vehicle, all its parts, including wheel disks, are subject to strong exposure to reagents that are sprinkled on the roadway. From such exposure, the paint gradually cracks, peels off, and after a few years the discs lose their attractiveness. This is especially true for stamped discs made of steel, on which traces of corrosion also appear. What to do in such cases? The discs are essentially in completely good condition, throw them away and buy new ones, no matter what you raise your hand, this is, in principle, not advisable, from the point of view financial costs. The best way out is restoration paint coating. Even if you turn to a specialized workshop for this service, this operation will still cost less than buying new disks. But you can do it differently, you can do everything yourself. Moreover, this does not require any special materials or special skills or abilities; you will learn everything along the way.
In order to paint rims on a car with your own hands, you need to carry out preparatory work, as well as select a paint material.
Which paint to choose
Today, two types of paint are used to restore discs:
- Powder;
- Acrylic.
The powder composition has certain advantages, for example, paints of this type are more durable and resistant to mechanical stress. Moreover, during production alloy wheels At manufacturing plants, powder coating is used. However, despite these advantages, the technology for applying such paint is quite complex and requires the use of specialized equipment (heat chamber and sandblasting). The fact is that dry powder is applied to the disc, which is fixed to the surface under the influence of high temperatures. There is another disadvantage of powder paint - when using it, you can only paint the entire product, and not its individual parts.
When using an acrylic composition, car enthusiasts will not have to face such problems. Acrylic paint has a brighter and more saturated color and palette, so you can choose the most suitable shade that will match the color of the car body. Painting car wheels using acrylic composition also has disadvantages. These include low resistance to exposure environment.
Based on the above, when deciding what to paint the rims with, it is better to give preference acrylic compounds. You can find this kind of paint in any specialty store. When choosing a manufacturer, remember - it is better to purchase paint and varnish from the same company.
Recently, for painting not only wheels, but also body parts, another covering material has begun to be used - liquid rubber. By cost, number of shades and mechanical strength it is comparable to acrylic paint. It is even easier to apply than acrylic. The most famous brand is liquid rubber "Plasti Dip".
In addition to paints and varnishes, you will need other materials.
Necessary equipment and materials
If you have chosen the powder painting method, then first of all you will need a sandblasting machine, which is used to thoroughly clean the worn disc from old paint, dirt and dust. In addition, with the help of this device you can perfectly level the surface of the product.
Advice! Sandblasting can be replaced a regular drill with various abrasive attachments.
You will also need a heat chamber, which is necessary for “baking” the powder paint. It is impossible to replace this type of equipment at home, so you will have to fork out more or still use a cheaper painting method.
Painting car wheels with acrylic paint is simple and cheap way bring old disks back to life. To do this you will need to prepare:
- Brush;
- Washing powder or regular detergent for dishes;
- Sandpaper of different abrasiveness (from 200 to 600);
- Automotive finishing putty;
- Several cans of primer;
- Can of varnish (transparent);
- Can of solvent 646;
- Protective gloves, respirator and glasses.
As you can see, the second method requires much less financial costs, especially since most of this list is already in your garage. Once everything is ready, you can start working directly.
Car wheel painting technology
First of all, make sure that the room in which you will work is well ventilated. Acrylic and varnish are not the best best combination for good health. Wear goggles and gloves to avoid chemical burns and remove the wheels from the vehicle.
In order not to stain the tire, it must be sealed with masking tape along the rim. The adhesive tape must be applied as tightly as possible to the edge of the rim while simultaneously tucking it into the gap between the rim and the tire.
There is another option, you can remove the tires from the rim completely. If you are afraid to do this yourself, then you can contact a car service; this service will cost you little. Next, it is necessary to prepare the surface of the disks for subsequent processing.
Surface preparation
Use a brush and detergent to thoroughly remove old paint and varnish from the surface. To degrease the disc and remove paint residues, use a solvent or anti-silicone.
Advice! To get rid of worn paint material in hard to reach places use an awl or thin screwdriver.
After this, walk over the surface sandpaper. At this stage, there is no need to rush; it is better to sand every millimeter of the disc for a long time and thoroughly. Use coarse sandpaper first, and the finest sandpaper at the very last stage. The surface to be treated must be periodically watered with water to remove any remaining sanded material and to better polish the disc.
Advice! It’s also not worth cleaning discs with fanaticism, since minor roughness and cracks will in any case hide layers of paint and varnish.
Of course, the old disk will have numerous chips, dents and other defects, which can be eliminated using automotive putty. When it's dry, go over the surface again with fine sandpaper and pour water on the disc.
Primer
The degreased and cleaned surface must be primed. To do this, you need to start applying the primer first to the inner surface of the product, and then move on to the outer part.
Advice! While spraying, shake the primer canister periodically.
To ensure that the repair (painting) of discs is carried out efficiently, try not to rush. The primer must be applied evenly, while holding the container with liquid at a distance of 25-30 cm from the surface. After you have applied the primer, let the disc dry and repeat the procedure (2-3 coats will be enough). In order not to wait long after each application of primer, you can use a regular hair dryer. In any case, it is better to start painting the wheels only the next day.
Painting and varnishing
Before using varnish and paint, carefully read the instructions for use of these materials, as drying time for liquids may vary depending on the manufacturer.
Dried and primed diks must be placed on polyethylene so that during painting, dust and dirt do not stick to them. The technology for applying paint is the same as for primer - we start with inside products and then move on to the outer part. Apply 2-3 layers of paint, leaving the surface to dry for 15 minutes after each procedure. After that, wait 20-25 minutes and use the varnish. After the first application of varnish, it is necessary to check the surface of the discs for unevenness. If you find them, then go over them with fine sandpaper. Next, all that remains is to apply the final layer of varnish and wait until the product is completely dry (6-7 days). This completes the restoration of the discs.
In custody
Now you know how to paint wheel rims with your own hands. As you can see, this process does not take much time, and the money is several times cheaper than at a car dealership. The main thing is not to allow dust to settle on the newly painted surface, as this will greatly damage the appearance products. In all other respects, just work calmly and carefully and the result will please you.
Photos were taken from a video posted on the My OBZOR channel. Thanks to the author!
Having decided, many people wonder what is the best way to do this? What materials should be used to make the new coating on these car wheel parts last as long as possible? How to apply them and what paint is usually used? This will be discussed in this publication.
What materials to choose?
Car rims are subject to strong mechanical stress, so their paintwork must be especially resistant in this regard. Acrylic-based enamels, primers and varnishes have increased wear resistance, so they are well suited for painting car rims. You can use either a special sprayer or enamel in cans.
Polyurethane-based materials are also suitable for painting car rims. At the same time, the experience and reviews of many car enthusiasts suggest the following painting order:
- cleansing;
- application of acid primer;
- drying discs;
- one layer of epoxy primer;
- drying;
- sanding with 400 grit sandpaper;
- applying enamel (this can also be done by mixing polyurethane varnish, base paint and required quantity hardener).
An alternative material for . It is a mixture of dust polyester resin and pigment. This type of paint adheres well to the surface due to its electrostatic properties.
After application, the part is exposed to high temperature in a special chamber where the paint melts and is fixed on the disks. Compared with acrylic materials Powder paint is less resistant to mechanical and chemical influences. However, this painting option is often preferred due to its quick application and relatively economical consumption. Powder materials are best suited for refinishing cast alloy wheels.
Also, to update these parts you need a solvent and fine sandpaper. To pre-wash parts, it is better to use car shampoo rather than washing powder or fairy.
Separately, it is necessary to say about sandblasting car rims before painting. If you have no experience in this work, then it is better to use the classic method of removing old paint and rust using sandpaper or. If you use poorly sifted sand and overdo it with pressure, then stains and stains may remain on the surface of the part, which will be difficult to remove and paint over in the future. To avoid this, some people use soda ash instead of sand to clean car wheels.
Benefits of enamel for discs
When purchasing materials to paint car rims, do not neglect the consultation of the seller. Surely, he will show you several paint options that are created specifically to update these particular car parts. There are many brands of such enamel today, so there will certainly be plenty to choose from.
What are the benefits of using rim enamel? Let's call them:
- updating the appearance of the part;
- creating an elastic coating that is resistant to impact from pebbles, salt, moisture, sand and other factors;
- providing anti-corrosion protection;
- many enamels can be applied without prior priming and without varnish;
- Aerosol cans allow you to paint parts of different shapes.
How to apply enamel for discs?
Before using enamel to paint wheel rims, you need to clean the parts from rust, degrease them thoroughly and dry them thoroughly. Elements that cannot be painted should be protected with masking tape.
Automotive enamel is applied in a well-ventilated place, and do not forget about the means personal protection such as a respirator, goggles, gloves. It is necessary to spray paint from a distance of about 30 cm, shaking the can periodically. The ambient temperature when painting wheel rims should not be less than +10°C. Observe the drying time of the enamel. For different brands The paint may vary, but generally the discs should dry for at least 3-4 hours.
Video on the topic:
How to paint rims on a car.
An easy way to quickly update your look.
We prepare and paint stamped wheels.
We paint the wheels with our own hands in a regular garage. Nothing complicated.
How to paint wheels yourself in 5 minutes
How to paint wheels yourself using a spray can in 5 minutes. Many car enthusiasts do not want to spend a lot of money...
RELIABLE PAINTING OF R14 STAMPS WITH A CAN
PAINTING OF DAMPS R14.
Car wheels painted by yourself will look no worse than after taking them to a specialized workshop. Besides independent restoration will bring no less pleasure than the attractive appearance of the wheels. Before you paint your car's rims, let's look at what paints are used for the job.
Paints
Powder. They are applied by sandblasting, with preliminary removal of old paint residues under pressure, and careful leveling of the surface to be painted. This method It is considered expensive due to the need to use special equipment and a heat chamber, so it is not suitable for painting discs yourself.
Acrylic. Paints are easily applied to any surface using a spray gun or special cylinders. After drying, the painted surface is varnished. Recommended to use paints and varnishes one manufacturer.
Materials and necessary tools
Painting wheels will require the use of the following tools and equipment:
- sandpaper (abrasive);
- brushes with plastic and metal bristles;
- detergents household products, white spirit (solvent);
- finishing auto putty, primer, varnish, acrylic paint;
- protective equipment - gloves, respirator, plastic glasses.
Preparing the disc surface before painting
You need to dilute a small amount in warm water washing powder or detergent, and then, using a brush with plastic bristles, you need to thoroughly wash the wheel rim from dirt. The dried metal disk surface is treated with a brush with steel bristles and abrasive paper.
The prepared surface should be smooth, free of old paint and rust. After cleaning, it is necessary to blow off the disk surface using a compressor. 
The final treatment will be degreasing, for which a rag soaked in white spirit (solvent) is used.
Before you paint rims, their metal surface needs careful putty, which will hide visible defects: chips, cracks and large scratches. For this purpose, automotive putty (finishing) is used. After complete drying, it must be thoroughly sanded with fine sandpaper.
When all visible defects have disappeared, the prepared surface is sanded (using zero abrasive paper and water), and it is brought to perfect condition.
How to properly prime a disc
The next step preparatory work the disc will be primed. To do this, the dried, sanded surface must be carefully treated with white spirit. After a few minutes, you can begin priming work, which must begin by covering the inner surface of the rim. It is necessary to apply the primer (using a spray bottle or a can) in an even layer, and do not allow drips or poorly treated areas.
Having finished applying the first layer, you need to leave the surface to dry. After which the priming procedure will need to be repeated. To speed up drying, you can use a hair dryer. Care should be taken to ensure that there is ventilation in the room where painting work will be carried out. It is best to carry out work outside in dry, windless weather. After some time, it will be possible to paint the rims, since by then the primer will have time to dry completely, and the acrylic paint will lie perfectly on the treated surface.
We paint the disk. Final stage
Using a spray gun or a can of acrylic paint, we begin to paint the disc. Before starting work, do not forget to place a cloth or paper under it to prevent dirt from getting onto the surface to be painted. After applying the 1st layer, you must let the paint dry, after which the procedure must be repeated. It is advisable to paint the disc three times, and then you can start varnishing it. Varnish (colorless) is applied twice with a break of 15 minutes. It is recommended to let the wheel dry for 1-2 days before using it. To avoid an annoying surprise, do not forget to paint the spare tire. To give the disk surface a more attractive appearance, it can be polished after drying.
Wheels are a very vulnerable spot on any car. They are the ones who take the maximum impact: impacts from oncoming stones, curbs, tree branches. Particularly susceptible to wear and tear alloy wheels, when hitting an obstacle, they can not only bend, but also crack or scratch in some places, and their appearance becomes unsightly. However, the situation can be corrected; special paint for discs is used for this.
Painting rims is done for two main reasons:
- if the discs have lost their original appearance and require restoration;
- painting for decorative purposes - for example, luminous paint for wheels will give the car originality and make it stand out from the crowd.
In the second case, special colors are often used that attract attention; they often use paint for wheels with a “chrome” effect.
Types of car paints
Painting wheels is not only a decorative move, but also protection. Modern coatings can reliably protect metal from corrosion. There are several types of such paints, they all differ in composition and purpose.
Powder
Powder paints for painting wheels are popular among car enthusiasts due to their durability and high resistance to various types of influences. Among the serious advantages is the possibility of application to almost any type of titanium and steel discs.
Minus powder paints It is believed that special equipment is necessary - the dye in powder form, according to the technology, must melt at a temperature of about 200 degrees. This is why powder technology is not suitable for aluminum - aluminum wheels can become deformed.
The coloring technology involves cleaning the stamp from the old coating using the sandblasting. Then the surface is thoroughly degreased, covered with primer and dye is applied in a special painting booth.
It will take at least a day for the paint to dry completely. Carry out such work in garage conditions You can do it yourself, but it’s not profitable.
Acrylic
Acrylic paint works well for painting wheels. This option is the best choice. Using acrylic is very convenient, and you can apply it yourself - the dye is sold in an aerosol, but you can also work with a spray gun. You can paint discs with aerosol acrylic paint quickly and efficiently, and at the same time inexpensively.
Among the main advantages are complete protection of the surface from the effects of precipitation. Road reagents also cannot harm the painted surface in any way. But it must be borne in mind that acrylic has average durability.
Spray paint for wheels is chosen in most cases because of its affordable price and ease of use - the spray allows you to get high-quality results in the fastest possible time.
Before applying spray paint, be sure to treat the disc with abrasive materials. Next, the contents of the container are thoroughly mixed (the container must be shaken for three minutes) - this way, color uniformity is achieved. Then, without fail, do a test spraying on any other area; if the paint is sprayed well and evenly, you can apply it to the discs.
Compared to powder dyes, the advantage here is the ability to dry quickly - the painted surface dries in just 10 minutes. Choice color range also extensive, spray paint is available in any shade, but silver paint (chrome-look) is popular.
If you add a little phosphor to acrylic, you can get luminous paint - the wheels will glow in the dark, which will attract prying eyes. The brightness of the glow depends on how much the phosphor is “saturated” with light.
Rubber
Rubber paints are in great demand among those who like to highlight their car and tune it in every possible way. The reason for the great popularity of such coatings is their versatility. They can be used not only on metal, but also on plastic and glass. The coating can be either matte or glossy, this gives buyers the opportunity to choose what they want.
There is also rubber luminescent paint on sale that glows. The composition contains a special pigment - a phosphor, which accumulates light during the day and begins to emit it at night. This creates an interesting glowing effect.
Applying dye to cast wheels is very convenient. Spray spray paint for discs in two or three layers of small thickness. The surface will be smooth and even. The process may take an hour or more. In this case, the primer of the discs is as preparatory stage you can skip it.
In the video: painting wheels with Plasti Dip liquid rubber.
Popular products
Body
Body paints are a one-component alkyd composition produced in aerosols. The product has increased strength and wear resistance, and has good adhesion.
Body paint has an affordable price and low consumption (the optimal number of layers applied is two or three). Ideal as a paint for stamped wheels, as well as cast versions. Should be applied with a spray gun. How much material is needed to paint one wheel is usually indicated on the can, but the consumption is small.
Motip
Unlike Body, Motip disc enamels are acrylic-based compositions designed to give an attractive appearance. Products from Motip have all the advantages acrylic paints, the compositions protect the surface from various influences and are characterized by high adhesion.
The palette includes black, white, and golden colors. The texture can be matte or glossy. All products are supplied exclusively in cans.
How to paint: spray the enamel onto a cleaned and degreased surface, holding the can at a distance of 30-40 cm. The material is ideal as paint for alloy wheels.
As an analogue, you can use Kudo products - these are paints in spray cans based on liquid rubber good quality.
What paint to paint depends on the purpose - if you need to give the surface gloss and shine, and not just protect it from corrosion, then it is better to use acrylic and rubber coverings. Wheel painting glowing paint will make the car doubly original.
How to paint wheels yourself (2 videos)
Paints of different brands (25 photos)
Every car owner sooner or later faces the problem of aging car wheels - after endless kilometers on domestic roads, they get scratched, and the paint, if not peeling off, then definitely loses its original appearance. And it also happens when, after buying a new car, you want something more original and, most importantly, unique, so that no one else has it. Therefore, the question often arises about how and with what to paint cast or stamped wheels on a car yourself, so as not to mess up the result.
You can, of course, buy new wheels or take the car to a service center so that the technicians can provide first-class service, but all this costs a lot of money. And if you doubt whether the wheels are painted yourself, look at the attached photos and see for yourself. In this article, we will analyze the entire process step by step to understand how to properly paint cast and stamped wheels on a car. Moreover, the process will not take much of your time or money.
What paint to paint car wheels
First of all, you need to decide what paint to paint your car's rims, and, of course, what color. For this purpose, there are two types of paints: powder and acrylic; Each of them has its own advantages and disadvantages that you should pay attention to before choosing.
- Powder paint is durable, wear-resistant and can last for a long time. The coating is not deformed or scratched. This is production paint, since it is what is used to coat new, freshly manufactured, alloy wheels. Negative side– complex application technology requiring special equipment; inability to paint part of the disc, for example, a scratched area.
- Acrylic paint gives more room for imagination due to the variety of color palettes. It is easier to apply and distribute it over the disk, and you can also expose a small piece of the surface. However, this coating is less resistant to damage, and if you drive carelessly over bumps, pieces of paint can quickly break off.
When choosing what paint to paint stamped, cast or forged wheels, it is better to give preference to powder, since it will last much longer, but if you still want brightness and variety, and you are ready for careful care of the wheels, then try acrylic - then for sure you can make your car the most original.
Preparing to paint rims on a car
If when deciding how to paint your car’s rims yourself, it doesn’t really matter what they are like “from birth,” but for the process of preparing for painting this is a significant nuance.
For example, how to properly paint alloy wheels. First, they must be carefully prepared - primed with a special primer intended for non-ferrous metals, otherwise the paint will peel off quickly. Steel and forged wheels do not necessarily require this, but the primer provides a base for the paint, then it adheres and sticks better.
The first stage of preparation is removing the old paint. To do this, use a stiff brush and a special detergent that will help you easily remove layers of old paint from the discs. If it remains in small areas that cannot be reached with a brush, use an awl or a thin screwdriver. Remember, in order to properly paint cast or stamped wheels yourself, when removing old paint, it is better not to damage the disk.
Next, go over the entire surface with coarse sandpaper - this process will take a little longer as you need to thoroughly sand the wheel if you want to paint it correctly. Gradually move to finer sandpaper until you have sanded the entire surface. Tip: periodically water the disc with water - then it will be better polished, and the sanded material will be removed without leaving a trace.
If the disk is not new, then you will need finishing putty, which needs to treat the surface and putty all chips, scratches and other defects that appear on the disc. After this, sand again with fine sandpaper, not forgetting to water.
- Dry the surface after the last step and degrease it with a solvent.
- Start priming on the inside of the car wheel, only then coat the outside.
- Shake the can of primer periodically while spraying so that it applies evenly; keep it about 30 centimeters from the disc.
- Apply two or three layers, allowing each to dry thoroughly - to speed up the process, use a hair dryer, a hair dryer or a regular cosmetic one, available in almost every apartment.
Allow all layers of primer to dry - for this purpose it is better to start painting the next day.
How to paint wheels on a car? Step-by-step instruction
After all the preparatory activities You can also paint your car's rims. To do this you will need the following equipment:
- paint and varnish (we recommend choosing from the same manufacturer - they will interact better with each other);
- a piece of fabric or polyethylene on which you will place the disc;
- protective film and masking tape to cover the wheel;
- sandpaper or abrasive paste;
- polish and silicone grease (optional).
Step 1. Spread a clean cloth or polyethylene on a free area - this will protect the surface from dust. Then cover the tire protective film and secure with the provided masking tape. Try not to let it climb onto the surface of the disks themselves.
Step 2. Carefully read the instructions for the selected paint and apply it following the manufacturer's recommendations. In this case, proceed with the same caution as with a primer - car wheels are painted in several layers, allowing each to dry. Exact time The exposure time depends on the paint, as a rule, you need to wait about 10 minutes. Next, apply 2 layers of clear varnish, also following the instructions. The layers should be thin, the drying time before applying the next one is from 3 to 5 minutes.
Step 3. After completing the process, let the disc dry thoroughly, and in general, you can finish there. But to add shine, after about a week, go over the surface with polish - after that, the car wheels will shine like new. And the rubber can be renewed with silicone grease.
If necessary, you can paint the wheels again if the first painting did not bring the desired result or a certain defect remains. Now you already have the necessary experience, and things will go faster and the result will be better.
You have to work hard to paint chrome wheels - the old coating cannot be easily removed either with sandpaper or grinder. We advise you to try sandblasting, it cleans the surface more thoroughly. The top can be coated with chrome (if, for example, a separate area is damaged and needs restoration) or the disc can be painted as described above.
So, you can paint car rims yourself. To do this, you only need special paint, varnish, time and a little skill. Knowing certain subtleties, you can get results no worse than turning to professionals in a car repair shop, but at the same time much cheaper. Look at the photos and videos that clearly demonstrate the process, and get started.