Fuelless Tesla engine. Free energy generator: diagrams, instructions, description. General descriptions of mechanisms

The idea of generating “fuel-free” electricity at home is extremely interesting. Any mention of current technology instantly attracts the attention of people who want to receive the intoxicating possibilities of energy independence free of charge. To draw correct conclusions on this topic, it is necessary to study theory and practice.

The generator can be assembled without much difficulty in any garage

How to create a perpetual generator

The first thing that comes to mind when mentioning such devices is the inventions of Tesla. This person cannot be called a dreamer. On the contrary, he is known for his projects that were successfully implemented in practice:

He created the first transformers and generators operating on high-frequency currents. In fact, he founded the corresponding direction of electrical RF equipment. Some of the results of his experiments are still used in safety regulations.
Tesla created a theory on the basis of which the designs of multiphase electrical machines appeared. Many modern electric motors are based on his developments.
Many researchers rightly believe that Tesla also invented the transmission of information over a distance using radio waves.
His ideas were implemented in the patents of the famous Edison, according to historians.
The giant towers, power generators that Tesla built, were used for many experiments that were fantastic even by modern standards. They created an aurora at the latitude of New York and caused vibrations comparable in strength to powerful natural earthquakes.
The Tunguska meteorite, they say, was in fact the result of an experiment by the inventor.
The small black box that Tesla installed in a production car with an electric motor provided full power for many hours without batteries or wires.

Experiments in the Tunguska region

Only some of the inventions are listed here. But even brief descriptions of some of them suggest that Tesla created a “perpetual” motion machine with his own hands. However, the inventor himself used not spells and miracles for calculations, but quite materialistic formulas. It should be noted, however, that they described a theory of the ether, which is not recognized by modern science.

To check in practice, you can use standard device diagrams.

If you use an oscilloscope to measure the oscillations that a “classical” Tesla coil produces, interesting conclusions will be drawn.

Voltage oscillograms for different types of inductive coupling

Strong inductive coupling is achieved in a standard manner. To do this, a core made of transformer iron or other suitable material is installed in the frame. The right side of the figure shows the corresponding vibrations and the results of measurements on the primary and secondary coils. The correlation of processes is clearly visible.

Now you need to pay attention to the left side of the picture. After applying a short-term pulse to the primary winding, the oscillations gradually die out. However, a different process was recorded on the second coil. The oscillations here have a clearly expressed inertial nature. They do not fade out for some time without external replenishment of energy. Tesla believed that this effect explains the presence of ether, a medium with unique properties.

The following situations are cited as direct evidence of this theory:

Self-charging of capacitors not connected to an energy source.
A significant change in the normal parameters of power plants, which is caused by reactive power.
The appearance of corona discharges on a coil that is not connected to the network, when it is placed at a great distance from a working similar device.

The last of the processes occurs without additional energy expenditure, so we should consider it more carefully. Below is a schematic diagram of Tesla coils, which you can assemble without much difficulty with your own hands at home.

Schematic diagram of Tesla coils

The following list shows the main product parameters and features that must be taken into account during the installation process:

For a large primary winding design, you will need a copper tube with a diameter of about 8 mm. This coil consists of 7-9 turns, laid with a spiral expansion towards the top.
The secondary winding can be made on a frame made of a polymer pipe (diameter from 90 to 110 mm). PTFE works well. This material has excellent insulating characteristics and maintains the integrity of the product structure over a wide temperature range. The conductor is selected to make 900-1100 turns.
A third winding is placed inside the pipe. To assemble it correctly, use a stranded wire in a thick sheath. The cross-sectional area of the conductor should be 15-20 mm 2. The amount of voltage at the output will depend on the number of turns.
To fine-tune the resonance, all windings are tuned to the same frequency using capacitors.

Practical implementation of projects

The example given in the previous paragraph describes only part of the device. There is no precise indication of electrical quantities or formulas.

You can make a similar design with your own hands. But you will have to look for circuits of the exciting generator, perform numerous experiments on the relative position of the blocks in space, and select frequencies and resonances.

They say that luck smiled on someone. But it is impossible to find complete data or credible evidence in the public domain. Therefore, only real products that you can actually make at home yourself will be considered below.

The following figure shows the electrical circuit diagram. It is assembled from inexpensive standard parts that can be purchased at any specialized store. Their denominations and designations are indicated in the drawing. Difficulties may arise when searching for a lamp that is not currently commercially available. To replace, you can use 6P369S. But you need to understand that this vacuum device is designed for less power. Since there are few elements, it is permissible to use the simplest wall-mounted installation, without making a special board.

Electrical circuit of the generator

The transformer indicated in the figure is a Tesla coil. It is wound on a dielectric tube, guided by the data from the following table.

Number of turns depending on winding and conductor diameter

The free wires of the high-voltage coil are installed vertically.

To ensure the aesthetics of the design, you can make a special case with your own hands. It will also be useful for securely fixing the block on a flat surface and subsequent experiments.

One of the generator design options

After connecting the device to the network, if everything is done correctly and the elements are in good condition, you will be able to admire the coronary glow.

The three-coil circuit shown in the previous section can be used in conjunction with this device for experiments in order to create a personal source of free electricity.

Coronary radiation over the coil

If it is preferable to work with new components, it is worth considering the following scheme:

Field-effect transistor generator circuit

The main parameters of the elements are shown in the drawing. Assembly explanations and important additions are listed in the following table.

Explanations and additions to the assembly of a field-effect transistor generator

Detail	Main settings	Notes
Field-effect transistor	You can use not only the one marked in the diagram, but also another analogue that works with currents from 2.5-3 A and voltages of more than 450 V.	Before installation operations, it is necessary to check the functional condition of the transistor and other parts.
Chokes L3, L4, L5	It is acceptable to use standard parts from the line scan unit of the TV.	Recommended power – 38 W
Diode VD 1	It is possible to use an analogue.	Rated current of the device is from 5 to 10 A
Tesla Coil (Primary Winding)	It is created from 5-6 turns of thick wire. Its strength allows you not to use an additional frame.	The thickness of the copper conductor is from 2 to 3 mm.
Tesla Coil (Secondary Winding)	Consists of 900-1100 turns on a tubular base of dielectric material with a diameter of 25 to 35 mm.	This winding is high-voltage, so it will be useful to additionally impregnate it with varnish, or create a protective layer with fluoroplastic film. To create the winding, a copper wire of 0.3 mm in diameter is used.

Skeptics who deny the very possibility of using “free” energy, as well as those people who do not have basic skills to work with electrical equipment, can make the following installation with their own hands:

Unlimited source of free energy

Let the reader not be confused by the lack of many details, formulas and explanations. Everything ingenious is simple, isn’t it? Here is a schematic diagram of one of Tesla's inventions, which has survived to this day without distortion or correction. This installation generates current from sunlight without special batteries or converters.

The fact is that in the radiation flux of the star closest to Earth there are particles with positive charges. When hitting the surface of a metal plate, a process of charge accumulation occurs in an electrolytic capacitor, which is connected to a standard ground electrode with the negative side. To increase efficiency, the energy receiver is installed as high as possible. Aluminum foil is suitable for baking food in the oven. With your own hands, using available tools, you can make a base for securing it and raise the device to a greater height.

But don't rush to the store. The performance of such a system is minimal (below is a table with information on the device).

Exact experimental data

On a sunny day after 10 o'clock the measuring device showed 8 volts at the capacitor terminals. Within a few seconds in this mode, the discharge was completely spent.

Obvious conclusions and important additions

Despite the fact that a simple solution has not yet been presented to the public, it cannot be said that the electromagnetic generator of the great inventor Tesla does not exist. The theory of ether is not recognized by modern science. The current systems of economics, production, and politics will be destroyed by free or very cheap energy sources. Of course, there are many opponents of their appearance.

Electricity helps humanity solve a huge range of domestic and industrial problems, but its production requires a constant expenditure of resources from humans. The most effective today are fuel generators that are used at thermal power plants and in mobile models of gasoline and diesel generators. But the development of progress does not stand still - humanity is constantly trying to reduce the cost of electricity through the introduction of innovations. One of the most revolutionary ideas is to create a fuel-free generator that can be rotated without wasting resources.

What is a FTG (fuel-free generator)?

The idea itself is relatively not new; the concept of a fuel-free generator refers to a device that will generate electricity without the need to expend resources on rotating its shaft. This idea was based on such outstanding scientists as Tesla, Einstein, Hendershot and others. In those days, to start and operate the generator, steam was used, obtained from the combustion of some kind of fuel, and this is where the name fuel-free came from.

Nowadays, it is no longer necessary to use fuel to generate electrical energy. They learned to generate it from solar energy, wind energy, rivers, ebbs and flows. But the devices proposed by the physicists who were the founders of electrical engineering still border on science fiction and continue to excite the imagination of both eminent scientists and ordinary people.

Principle of operation

Any generating device is built on the principle of generating electric current through the directed movement of charged particles in a conductive medium. This effect can be achieved by:

Generation of alternating magnetic flux - when an EMF is induced in a conductor from an external magnetic field;
The flow of charged particles between media with different potentials;
Self-generation is an operating mode in which the device increases the power of the initial pulse, which allows it to maintain its operation and accumulate part of the energy to power some third-party consumer.

The only reason why such a plan cannot be fully realized is the law of conservation of energy. To get one type of energy, you still need to expend another type. Therefore, the idea of inventing a fuel-free generator gave rise to a lot of myths around this issue and gave rise to adventurers.

Myth or reality?

Let me note right away that great minds did not create the idea of a fuel-free generator for commercial gain. People like Nikola Tesla and Albert Einstein were driven by a completely natural thirst for knowledge and the desire to make this world a better place, and not by banal enrichment. As the chronicles of their activities testify, they managed to achieve incredible success. Many of their achievements left behind many more questions than answers, which gives our contemporaries a reason to continue their daring and scientific pursuits.

The reason why great scientists could not realize their inventions was the imperfection of technology or the absence of any component that would provide a stable result. Our contemporaries, in scientific laboratories and at home, are trying to realize unrealized ideas for creating a fuel-free engine, sometimes for scientific purposes, sometimes for profit. But it has not yet been possible to achieve the desired goal and establish the production of a fuel-free generator on an industrial scale.

Due to the rapid activity of scammers on the Internet, you will come across a lot of offers to buy a fuel-free generator, but these models do not work. As a rule, unscrupulous inventors take advantage of the population's illiteracy in matters of electrical engineering, create beautiful packaging and sell a dummy under the tempting name of a fuel-free generator. But this does not mean that working schemes do not exist; consider examples of the most famous of them.

Overview of BTGs and their schemes

Today there are quite a large number of fuel-free generators of various designs and operating principles. Of course, not all models and the principle of their operation were covered by the creators for the general public. Most fuel-free generators remain a secret, sacredly protected by their creators and patents. We can only analyze the available information about the principle of their action and general information about their effectiveness.

Adams generator - "Vega"

A fairly effective magnetic type generator invented on the basis of the theory put forward by scientists Adamsos and Bedini. The operation of the generator is based on a rotating magnetic rotor, which is made up of permanent magnets with the same pole orientation. When the rotor rotates, a synchronous magnetic field is created, which induces an EMF in the stator windings. To maintain rotor torque, short-term electromagnetic pulses are applied to it.

The industrial implementation of this principle was given to the Vega generator, which comes from the abbreviation Vertical Adams Generator, which is intended for power supply to private houses, cottages, and shipping facilities. Due to short-term pulses at the output, a pulsating voltage is created, supplied to the batteries for charging, and from them inverted into an alternating voltage of industrial frequency. But the question of whether the declared parameters correspond to its real capabilities is quite controversial.

Tesla Generator

It was patented by a famous Serbian physicist more than a hundred years ago. The principle of operation is the presence of electromagnetic radiation in the Earth's atmosphere, while the planet itself represents a much lower level of potential.

Rice. 1. Schematic diagram of the Tesla generator

Look at the picture, the Tesla fuel-free generator conditionally consists of the following parts:

Radiation receiver - made of conductive material located on a dielectric base. The receiver must be isolated from the ground and placed as high as possible;
capacitor (C) – designed to accumulate electrical charge;
ground electrode – designed for electrical contact with the ground.

The principle of operation is that the receiver receives electromagnetic energy, which begins to flow through a closed circuit to the ground. But, due to the presence of a capacitor, the charge does not flow down the ground electrode, but accumulates on the plates. When connecting a load to a capacitor, the device will be powered by discharging the capacitor. In addition, the design can be supplemented with automation and converters for continuous power supply along with recharging.

Generator Rossi

The operation of this fuel-free generator is based on the principle of cold nuclear fusion. Despite the absence of classical turbines driven by steam or combustion of petroleum products, for its operation, instead of burning fuel, a chemical reaction between nickel and hydrogen is used. In the chamber of the Rossi generator, an exothermic reaction occurs with the release of thermal energy.

It should be noted that for the reaction to proceed normally, a catalyst is used and electricity is consumed. According to Rossi, the amount of thermal energy generated is 7 times greater than the electricity consumed. This model is already beginning to be implemented for heating areas and generating electricity. But, since for operation it is still necessary to refuel the installation with working reagents, it cannot be called completely fuel-free.

Hendershot Generator

The principle of operation of this fuel-free generator was proposed by Lester Hendershot and is based on the conversion of the Earth's magnetic field into electrical energy. The scientist proposed a theoretical justification for the model back in 1901 - 1930, it consists of:

electric coils in resonance;
metal core;
two transformers;
capacitors;
permanent magnet.

For the circuit to work, the orientation of the coils must be observed from north to south, due to which the magnetic field will rotate, which will generate an EMF in the coils.

Mark Hendershot, son of Lester Hendershot presents his BTG

There is also a diagram of this BTG circulating online (picture below). How true it is, I cannot say.

Hendershot generator circuit

Generator by Tariel Kapanadze

Our contemporary claims that he discovered the possibility of obtaining electrical energy from the ether, working with Tesla coils and continuing the research of the famous scientist. Kapanadze's fuel-free generator consists of a Tesla coil, a block of capacitors, a battery and an inverter, but this arrangement is just a guess; the inventor himself keeps the design of the fuel-free generator in the strictest confidence.

Rice. 2: general view of the Kapanadze generator

Look at Figure 2 for a general view. Today there are rumors about an attempt to sell the device on a large scale for the needs of consumers in some countries, but they have not been able to achieve the final result.

The electrical circuit of this generator also travels through the network (figure below). But we cannot say how true it is.

Khmelevsky generator

According to the official version, Khmelevsky’s fuel-free generator was discovered by accident, since the creator conceived it as a power supply for converting direct current into alternating current. But it found wide application in geological exploration and became widespread in expeditions moving away from sources of central power supply.

Such a fuel-free generator consists of a transformer with split windings, resistors, capacitors and a thyristor. Electricity is generated due to the special design of the transformer itself, which can create a counter EMF greater than that at the input. This result is achieved due to the resonance effect and the application of a voltage of a certain frequency and amplitude.

John Searle Generator

The fuel-free Searle generator is based on the principle of magnetic interaction between the core and the rollers. In which magnetic rollers are placed at an equidistant distance and tend to maintain their position after the system is set in motion. The magnetic motor includes a multi-component fixed core, around which the same multi-component rollers rotate. There are coils installed along the diameter around the rollers, in which an EMF is generated when a magnetic roller passes near them. To start the device, starting electromagnets are used, which supply pulses that drive the rollers.

Rice. 3: general view of the Searle generator

According to Searle, the rollers independently increase the rotation speed due to the alternating magnetic field created by the different polarity combination of magnets inside the rollers and inside the stationary core. When manufacturing a structure in three levels, the rotation speed leads not only to the generation of electricity, but also reduces the weight of the device, up to an anti-gravity effect.

Romanov generator

The operating principle of the Romanov fuel-free generator is to apply standing waves to one of the capacitor plates, while the second plate is directly connected to the ground.

Rice. 4: operating principle of the Romanov generator

Look at the figure, here is the principle of operation of the device; when one plate is connected to the ground, a certain charge arises on it. Standing waves on the second plate generate a potential that is significantly different from the ground potential. Coils with multidirectional winding act as a standing wave generator, in which eddy currents compensate for the active component of the current. After accumulating charge, the capacitor can be used to power electrical appliances as a load.

But it was not possible to achieve unambiguous success for domestic or industrial purposes in the implementation of this model.

Schauberger generator

Such a fuel-free generator is based on obtaining torque on a turbine by moving water through a pipe system and further converting mechanical energy into electrical energy. To achieve this effect, the design of the generator uses a through flow of water obtained from moving water from bottom to top.

Rice. 5: Schauberger generator circuit diagram

The principle of operation of this mechanical generator is based on the creation of cavitation cavities in the liquid - a state of rarefaction close to vacuum, due to which the water moves not from top to bottom, as we are accustomed to observing in nature, but from bottom to top, which sets the rotor of the electric generator in motion and creates a vicious cycle. When water rises up through the inner tubes and falls back into the original reservoir.

Is it possible to make a fuel-free generator with your own hands?

Many of the generators discussed above cannot be implemented at home. In some cases, their authors do not provide electrical circuits for public use; in others, autonomous operation ends some time after the start of generation. But there are models that you can try to implement at home yourself. But we don't give any guarantee. This is just an attempt and one of the possible implementations.

Let's look at the example of manufacturing a fuel-free Tesla generator. For this:

Rice. 9: Measure the charge of the capacitor

As you can see, the Tesla fuel-free generator really works, and you can assemble it at home yourself. The main drawback is that it can only power an LED, and only for a few seconds at most. The power of such a device depends on the area of the receiver and the capacitance of the capacitor. And while it is still possible to select high-capacity capacitors, creating a receiver the size of a football field so that you can uninterruptedly power at least a house is quite problematic.

Video selection on the topic

If for some reason this is not suitable for you, then you can make a fuel-free Tesla generator. In fact, this generator allows you to get free electricity without investment!

Nikola Tesla - you've probably all heard about him, he is known for his revolutionary contribution to the study of the properties of magnetism and electricity. One of his inventions is a fuel-free generator.

A device for recycling radiant energy (this is the name of the generator in the patent) is not difficult to make with your own hands.

To make a homemade fuel-free Tesla generator you will need:

aluminium foil

capacitor with voltage 160 – 400 V

resistor

metal pin

sheet of cardboard or fiberboard

How to make a homemade Tesla generator

We drive a metal pin into the ground, attach one end of the wire to it, and the other to the capacitor.

We attach a sheet of foil to a cardboard sheet, and attach a wire to it that goes to the capacitor.

A limiting resistor must be soldered to the capacitor, otherwise dielectric breakdown may occur.

This generator has a high coefficient of performance (efficiency), while the cost of building such stations is significantly lower than stations with solar modules. Who knows, maybe this is the future of energy...

Terenty comments:

I wonder if it can only charge capacitors or can a battery be charged too?
If so, then you can get free electricity.

Rinat comments:

In theory, if you can charge the condensers, then you can then remove the current from them and then use them to charge the battery.

Vladimir comments:

I observe damped oscillations, and do not consume energy.

Vladimir comments:

Output impedance is too high. For the practical use of atmospheric electricity, a very large number of such devices connected in parallel will be required.

Yuri comments:

I will buy a ready-made fuel-free electric generator 89118080033 Yuri boss@

Andrey comments:

Fuel-free generator

The name of Nikola Tesla has become known only in recent times. The Serbian emigrant is considered a genius of all times and peoples for his greatest inventions, the number of which exceeds the number of inventions of Da Vinci himself. It is generally accepted that everything that was created after Tesla belongs to him. And in truth, Tesla created things whose functionality is still not fully understood. But now we won’t talk about all of Tesla’s inventions, but let’s talk about. The generator works in the simplest way, consisting of aluminum foil and a storage capacitor.

One pole of the capacitor must be grounded; the ground is a huge source of negative energy. The other end of the wire is attached to the foil (the foil must be secured to plywood or cardboard in advance). In the presence of light, current will flow constantly into the capacitor; it is advisable to select capacitors with a larger capacity (voltage 160 - 400 volts).

Charging the capacitor, depending on the capacitance, may take some time, the current is of course negligible, its value depends on the area of the foil. The grounding wire can be connected to a gas or water pipe, preferably using copper wires. A limiting resistor must be soldered onto the capacitor, since its charging will last indefinitely, and the voltage will increase, which can lead to breakdown of the dielectric. In the future, you can try connecting several such generators in parallel, with the goal of increasing the current.

In our opinion, this method of obtaining energy in the future may become indispensable, since this device has a fairly high efficiency, and construction costs are negligible compared to. It is difficult to say whether such generators can replace traditional methods of generating electrical energy, but this line has not been sufficiently studied. In the future, we will consider several more types of similar generators that will allow you to obtain electrical energy for little waste, for today that’s all - AKA.

Nikola Tesla is one of the most famous scientists in the field of electrical power and electricity, whose scientific legacy still causes much controversy. And if practically implemented projects are actively used and known everywhere, then some unrealized ones are still objects of research, both by serious organizations and amateurs.

Generator or perpetual motion machine?

Most scientists deny the possibility of creating a free energy generator. It should be countered by the fact that even in the past, many modern achievements also seemed impossible. The fact is that science has many areas where research has been far from complete. This especially concerns issues of physical fields and energy. Those types of energy that are familiar to us can be felt and measured. But it is impossible to deny the presence of unknown species only on the grounds that there are no methods and instruments for their measurement and transformation.

For skeptics, any proposals for generators, schemes and ideas based on the conversion of free energy seem to be perpetual motion machines that operate without consuming energy, and are even capable of generating excess in the form of known energy, thermal or electrical.

We are not talking about perpetual motion machines here. In fact, the eternal generator uses free energy, which currently does not yet have a clear theoretical justification. What was light previously considered to be? And now it is used to generate electrical energy.

alternative energy

Supporters of traditional physics and energy deny the possibility of creating a workable generator, using existing concepts, laws and definitions. A lot of evidence is given that such devices cannot exist in practice, since they contradict the law of conservation of energy.

Proponents of the “conspiracy theory” are convinced that calculations of the generator exist, as well as its working prototypes, but they are not presented to science and the general public, since they are not profitable for modern energy companies and can cause an economic crisis.

Enthusiasts have repeatedly attempted to create a generator; they have built many prototypes, but for some reason reports on the work regularly disappear or disappear. It has been noted that network resources dedicated to alternative energy are periodically closed.

This may indicate that the design is actually functional, and it is possible to create a generator with your own hands even at home.

Many people confuse the concepts of generator and transformer (Tesla coil). For clarification, we need to look at this in more detail. The Tesla transformer has been studied sufficiently and is accessible for repetition. Many manufacturers successfully produce various models of transformers both for practical use in various devices and for demonstration purposes.

A Tesla transformer is a converter of electrical energy from low voltage to high voltage. The output voltage can be millions of volts, but the design itself is not very complex. The genius of the inventor lies in the fact that he managed to assemble a device that uses the known physical properties of electromagnetic fields, but in a completely different way. There is still no comprehensive theoretical basis for the operation of the device.

The design is based on a transformer with two windings, with a large and a small number of turns. The most important thing is that there is no traditional ferromagnetic core, and the connection between the windings is very weak. Considering the output voltage level of the Tesla transformer, we can conclude that the usual method of calculating the transformer, even taking into account the high conversion frequency, is not applicable here.

Tesla Generator

The generator has a different purpose. The generator design also uses a transformer similar to a high voltage one. Working on the same principle as a transformer, the generator is capable of creating excess energy at the output, significantly exceeding that spent on the initial start-up of the device. The main task is the method of manufacturing the transformer and its configuration. Precise tuning of the system to the resonance frequency is important. The situation is complicated by the fact that such data is not freely available.

How to make a generator

To assemble a Tesla generator, you need very little. On the Internet you can find information on assembling a Tesla generator transformer with your own hands and diagrams for starting the structure. Based on the available information, recommendations are given below on how to independently assemble the structure and a brief setup procedure.

The transformer must satisfy conflicting requirements:

High-frequency free energy requires a reduction in size (similar to the difference in size of meter and decimeter range television antennas);
As the dimensions decrease, the efficiency of the structure decreases.

Transformer

The issue is partially solved by selecting the diameter and quantity of the primary winding of the transformer. The optimal winding diameter is 50 mm, so it is convenient to use a piece of plastic sewer pipe of the appropriate length for winding. It has been experimentally established that the number of turns of the winding should be at least 800; it is better to double this number. The diameter of the wire is not significant for a homemade design, since its power is low. Therefore, the diameter can be in the range from 0.12 to 0.5 mm. A smaller value will create difficulties during winding, and a larger value will increase the dimensions of the device.

The length of the pipe is taken taking into account the number of turns and the diameter of the wire. For example, PEV-2 wires 0.15 mm in diameter with insulation are 0.17 mm, the total length of the winding is 272 mm. Having retreated 50 mm from the edge of the pipe for fastening, drill a hole for fastening the beginning of the winding, and after 272 mm another one for the end. The pipe margin on top is a couple of centimeters. The total length of the pipe section will be 340-350 mm.

To wind the wire, thread its beginning into the bottom hole, leave a margin of 10-20 cm there and secure it with tape. After the winding is completed, its end of the same length is threaded into the upper hole and also secured.

Important! The turns of the winding must fit tightly to each other. The wire should not have kinks or loops.

The finished winding must be coated on top with electrical varnish or epoxy resin to prevent shifting of the turns.

For the secondary winding you need a more serious wire with a cross section of at least 10 mm2. This corresponds to a wire with a diameter of 3.6 mm. If it's thicker, that's even better.

Note! Since the system operates at a high frequency, due to the skin effect, the current propagates in the surface layer of the wire, so you can use a thin-walled copper tube instead. The skin effect is another justification for the large diameter of the secondary winding wire.

The diameter of the turns of the secondary winding should be twice as large as the primary, that is, 100 mm. The secondary can be wound on a 110 mm section of sewer pipe or on any other simple frame. A pipe or a suitable blank is needed only for the winding process. The rigid winding will not need a frame.

For the secondary winding, the number of turns is 5-6. There are several design options for the secondary winding:

Solid;
With a distance between turns of 20-30 mm;
Cone-shaped with the same distances.

The cone-shaped one is of the greatest interest because it expands the tuning range (has a wider frequency band). The lower first turn is made with a diameter of 100 mm, and the upper one reaches 150-200 mm.

Important! It is necessary to strictly maintain the distance between the turns, and the surface of the wire or tube must be made smooth (at best, polished).

Power supply circuit

For the initial start-up, a circuit is required that supplies a pulse of energy to the Tesla generator transformer. Next, the generator switches to self-oscillating mode and does not constantly need external power.

In developer slang, the power supply device is called a “kacher”. Those familiar with electronics know that the correct name for the device is a blocking oscillator (shock oscillator). Such a circuit solution generates a single powerful electrical impulse.

Many variants of blocking generators have been developed, which are divided into three groups:

On vacuum tubes;
On bipolar transistors;
On field-effect transistors with an insulated gate.

A tube electromagnetic generator using powerful generator tubes operates with high output parameters, but its design is hampered by the availability of components. In addition, not two, but three winding transformers are required, so tube blocking oscillators are now rare.

The most widely used devices are those based on bipolar transistors. Their circuitry is well developed, setup and adjustment are simple. We use domestically produced transistors of the 800 series (KT805, KT808, KT819), which have good technical parameters, are widespread and do not cause financial difficulties.

The proliferation of powerful and reliable field-effect transistors has made it possible to design blocking oscillators with increased efficiency due to the fact that MOSFET or IGBT transistors have better parameters for voltage drop across transitions. In addition to increasing efficiency, the problem of cooling transistors becomes less problematic. Proven circuits use IRF740 or IRF840 transistors, which are also inexpensive and reliable.

Before assembling the generator into a finished structure, double-check the workmanship of all components. Assemble the structure and supply power to it. The transition to self-oscillating mode is accompanied by the presence of voltage on the windings of the transformer (at the output of the secondary). If there is no voltage, then it is necessary to adjust the frequency of the blocking generator in resonance with the frequency of the transformer.

Important! When working with a Tesla generator, extreme caution must be exercised, since when starting, high voltage is induced in the primary winding, which can lead to an accident.

Generator application

The Tesla generator and transformer were designed by the inventor as universal devices for wireless transmission of electrical energy. Nikola Tesla repeatedly conducted experiments confirming his theory, but, unfortunately, traces of the energy transfer reports were also lost or safely hidden, like many of his other designs. Developers have only recently begun to design devices to transmit energy, but only over relatively short distances (wireless phone chargers are a good example).

In an era of inevitable depletion of non-renewable natural resources (hydrocarbon fuels), the development and construction of alternative energy devices, including a fuel-free generator, is of great importance. A free energy generator with sufficient power can be used for lighting and heating homes. You should not refuse research citing a lack of experience and specialized education. Many important inventions were made by people who were professionals in completely different fields.