Kozhukhov Ilya 22.03.2018 10:38
Advantages:
Small. Not noisy. Reasonable price tag. There is both a gas regulator and a water pressure regulator. There is nothing superfluous.
Flaws:
With strong pressure, it warms the water to 40-45 degrees (winter is outside). No temperature sensor.
I still don’t understand at what point during adjustment you need to press the gas/water adjustment knobs.
General impressions:
Installed, it works. It doesn’t make noise, the average water pressure heats up to 50 degrees, so far everything is quite normal.
rust173 11.02.2017 22:31
Advantages:
Everything was done as it should be.
Flaws:
Water enters at an awkward angle.
General impressions:
For some reason this column is poorly promoted. But in vain. People look at boches, vailantes, etc., which are no longer the cakes they used to be. In principle, I don’t want to get involved with the Chinese - you look at their thin heat exchanger tubes, flimsy waterworks, like made of foil, and you can’t believe that the column is working. Neva... also somehow didn’t impress me with the reviews, and the price tag for the speaker with the required functionality is something not domestic at all. I was specifically looking for one with a gas reducer (flame modulation), with a brass hydraulic unit with a reducer, and without newfangled plastic baubles in the connections, and with less electronics - no batteries. If there is protection against extinction, the column on the wick is quite satisfactory to me - the counter does not react to the wick. As for protection, there is everything necessary: against wick extinguishing, heat exchanger overheating and chimney clogging.
The speaker worked right out of the box, without tambourines or settings. Water enters, albeit at an awkward angle, but everything can be solved plastic pipes. Lights up quite quietly, without explosions. I have the last floor, but the column starts vigorously, because the cross-section of the tubes on the heat exchanger is decent, and in the working part it is also increased, like the famous Mohr column. The heat exchanger itself is painted to protect copper from oxidation - we'll see what happens next. The column responds adequately to the controls, especially “water flow”, which is very unusual for me. Before this there was a Proton column - so when adjusting the water it simply did not light up. The knob was constantly at maximum. And here the water handle is in the middle and the column does not respond to cistern or open cold water. On the second open tap hot water the column reacts a little - the water becomes a little cooler, and the pressure drops, of course - I’m on the top floor.
In general, I was pleased with the design - everything was done visually reliably and inspires confidence. Of course, it is too early to judge reliability - if there are incidents, I will definitely add a review. So far the flight is normal.
Baxi SIG-2 11 p - gas instantaneous water heater, intended for use in everyday life: in apartments, country houses or at the dacha. This model is capable of extremely quickly preparing the required volume of hot water, while being distinguished by its compact size, ease of installation and maintenance.
Like other models from the “p” series, this water heater is equipped with piezo ignition and a thermocouple.
Advantages of the Baxi SIG-2 11 p geyser
The water heater is based on open chamber combustion and is equipped with a piezoelectric ignition system with a pilot flame. The power can be adjusted very smoothly thanks to the presence of a modulating burner. The Baxi SIG-2 11 p water heater is perfectly adapted to domestic conditions, operating stably in the range of 13.5 - 20.0 mbar without reconfiguration due to the use of a built-in gas pressure reducer.
Universal burner made of of stainless steel, brass hydraulic group is resistant to scale formation and heat resistant copper heat exchanger With protective coating from condensation will ensure a long service life of the column. If necessary, the Baxi SIG-2 11 p water heater can be reconfigured to operate on liquefied gas.
This model is characterized as one of the safest in its class, equipped with several protective equipment:
- draft sensor - a thermostat that guarantees the safe removal of combustion products and instantly stops the gas supply to
- burner in case of chimney obstruction (blockage, strong wind);
- control of the presence of flame using a thermocouple;
- knob for regulating gas flow and power;
- knob for regulating water flow and temperature.
The water heater is supplied with two control knobs, a filter (inserted into the fitting at the water inlet), a fitting with a gasket (attached to the inlet of the pressure regulator), as well as hooks for hanging.
You can find out more information about this model and buy a Baxi SIG-2 11 p gas water heater from the sales department.
Description
Baxi SIG-2 14 i is a gas instantaneous water heater designed for use in everyday life: in apartments, country houses or in the country. This model is capable of extremely quickly preparing the required volume of hot water, while being distinguished by its compact size, ease of installation and maintenance.
Like other models from the “i” series, this water heater is equipped with electronic ignition and an ionization flame control system.
Advantages of the Baxi SIG-2 14 i geyser
The water heater is based on an open combustion chamber and is equipped with an electronic ignition system. The power can be adjusted very smoothly thanks to the presence of a modulating burner. The Baxi SIG-2 14 i water heater is perfectly adapted to domestic conditions, operating stably in the range of 13.5 - 20.0 mbar without reconfiguration due to the use of a built-in gas pressure reducer.
A universal stainless steel burner, a brass hydraulic group resistant to scale formation and a heat-resistant copper heat exchanger with a protective coating against condensation will ensure a long service life of the column. If necessary, the Baxi SIG-2 14 i water heater can be reconfigured to operate on liquefied gas.
This model is characterized as one of the safest in its class, equipped with several protective equipment:
- draft sensor - a thermostat that guarantees the safe removal of combustion products and instantly stops the gas supply to the burner in case of obstruction of the chimney (clogging, strong wind);
- ionization flame control;
- knob for regulating gas flow and power;
- digital display indicating the current water temperature;
- knob for regulating water flow and temperature.
The water heater is supplied with two control knobs, a filter (inserted into the fitting at the water inlet), a fitting with a gasket (attached to the input of the pressure regulator), an LR20 D 1.5 V battery, and hooks for hanging.
You can find out more information about this model and buy a Baxi SIG-2 14 i gas water heater from the sales department.
Download instruction manual
Functional diagram of the Baxi SIG-2 14 i column
 | 1. Smoke hood 2. Traction sensor 3. Water overheating sensor 4. Heat exchanger 5. Main burner 6. Flame control electrode 7. Pilot burner 8. Ignition electrode 9. Injectors 10. Hot water outlet 11. Gas pressure meter 12. Temperature regulator 13. Venturi nozzle 14. Water knot 15. Water valve 16. Water filter 17. Membrane 18. Cold water inlet 19. Power regulator 20. Gas unit 21. Gas valve block 22. Gas filter 23. Battery 24. Control unit 25. Microswitch 26. Water temperature sensor 27. Gas control valve 28. Bypass 29. Water flow regulator 30. Soft ignition valve 31. Interchamber valve 32. Ignition valve 33. Main gas valve |
You can pick up the purchased product yourself or use the delivery service in Moscow and the Moscow region. By placing an order today, you will receive it at your disposal tomorrow. If necessary, you can use the prompt delivery service and receive your products today.
Delivery to the entrance (check with the manager about the possibility of lifting to the floor)
Delivery is made daily from 9 to 21 o'clock , including weekends and holidays.
Check with the manager for exact delivery times!
Pickup points
Delivery cost in Moscow and the Moscow region:
- Within the Moscow Ring Road - from 0 to 500 rubles, (individual delivery cost is indicated in the product card)
- Outside the Moscow Ring Road up to 10 km - 700 rubles,
- Beyond the Moscow Ring Road further 10 km - 700 rubles + 30 rubles for each kilometer.
- To the regions, delivery by a transport company (calculated individually).
Delivery cost for
km from MKAD
700 rub.
Unloading of large-sized goods is carried out by the efforts and means of the customer.
The money is transferred directly to the courier upon receipt of the goods. This method is the most popular among buyers due to the simplicity and convenience of calculation.
Payment by bank card to the courier upon receipt
Couriers have a portable banking terminal, which allows clients of the Teplovod-Service company to pay for goods with bank plastic cards (check with the manager about the possibility of paying by bank card).
Payment by credit card on the website
To select payment using a bank card, on the “Cart” page, you must select the “Payment by bank card on the site” item.
Payment is made through PJSC SBERBANK using Bank cards of the following payment systems:
After clicking on the “ONLINE PAYMENT” button, you will be redirected to the payment gateway of Sberbank of Russia OJSC to enter your card details.
Please prepare your plastic card in advance. Additionally, you need to enter your full name, email, contact phone number, and reservation number to identify the payer. The connection to the payment gateway and the transfer of information is carried out in a secure mode using the SSL encryption protocol.
If your bank supports the Verified By Visa or MasterCard Secure Code technology for secure online payments, you may also need to enter a special password to make a payment. You can check the methods and possibility of obtaining passwords for making online payments with the bank that issued the card.
This site supports 256-bit encryption. The confidentiality of the reported personal information is ensured by Sberbank of Russia OJSC. The entered information will not be provided to third parties except in cases provided for by the legislation of the Russian Federation. Payments by bank cards are carried out in strict accordance with the requirements of Visa Int payment systems. and MasterCard Europe Sprl.
When paying by credit card, no interest is charged.
Payment is a transfer Money from the buyer's current account to the seller's account, we work on common system taxation including VAT. Delivery of goods is carried out after receipt of funds to the account of the company Teplovod-Service LLC. This method is used for calculations by legal entities.
Our details
Limited Liability Company "Teplovod-Service"
OGRN: 1105003006162
Taxpayer Identification Number: 5003088884
Checkpoint: 500301001
BIC: 044525225
Bank: PJSC “Sberbank of Russia”
R/s: 40702810838060011732
S/s: 30101810400000000225
Legal address: 142718, Moscow region, Leninsky district, Bulatnikovskoye rural settlement, Warsaw highway, 21 km., office B-6
Special conditions
- For any item shipped transport company, 100% payment required.
For goods with the status "To order" worth up to RUB 100,000. no prepayment required.
For goods with the status "To order" over 100,000 rubles. An advance payment of 30% is required.